Zte R218 Manuale utente
1
R218
Quick Start Guide
ZTE CORPORATION
ZTE Plaza, #55 Keji Road South, Hi-Tech, Industrial Park,
NanshanDistrict,Shenzhen,Guangdong,518057, P.R.China
2
Getting to Know Your Device
Appearance
The following figure is for your reference only.
1. Charging/micro-USB jack
2. Indicator light
3. Power key
Press and hold for about 3 seconds to power on/off your
device.
Press and hold for about 10 seconds to restart your
device.
5. WPS key
Press and hold for 3 seconds to activate the WPS function.
6. micro-SIM card slot and reset hole
Getting to Know Your Device
3
Indicator lights
Indicator Status Description
Battery
Red solid /
blinking The battery is low. Please
charge the battery.
Green
blinking The battery is being
charged.
Green
solid The battery level is middle
or high.
Light off Your device is not being
charged.
Wi-Fi
Blue solid Wi-Fi is active.
Blue
blinking WPS is active.
Light off Wi-Fi is off.
SMS
Blue solid You have unread messages.
Blue
blinking You have new messages.
Light off There is no unread
message or new message.
4
Network
Red Error status. Not registered
to the mobile network, no
micro-SIM card inserted or
no network service
available.
Green
solid Registered to the 2G/3G
mobile network.
Green
blinking Connected to the 2G/3G
mobile network and data is
being transferred.
Blue solid Registered to the 4G LTE
network.
Blue
blinking Connected to the 4G LTE
network and data is being
transferred.
5
Getting to Know Your Device
Connection Scenarios
The device allows multiple clients to surf on the Internet at the
same time. The following figure is for your reference only.
A micro-SIM card can be used to access the Internet.
Installin
g
1. Open the mi
NOTE:
Do not remove
device.
2. Install a mic
r
WARNING
Your device do
other non-stan
device, do not
u
3. Close the
m
6
g
Your Devi
c
cro-SIM card cover.
the cover rudely, be
c
r
o-SIM card to the m
!
es not support SIM
c
dard micro-SIM car
d
u
se those cards or a
m
icro-SIM card cove
r
c
e
c
ause it is connecte
d
icro-SIM card slot.
c
ards, nano-SIM car
d
d
s. To avoid dama
g
ny card holders.
r
.
d
with the
d
s or any
g
e to the
Connec
t
Using Wi-
F
1. Power on y
o
2. Ensure tha
t
enabled Wi-
NOTE: Re
further details
use a comput
e
address autom
3. Select the
Connect.
4. Enter the W
i
NOTE: Re
f
SSID and P
a
password.
5. Wait until t
successfully
Using a U
S
1. Connect a c
o
2. Power on
y
identifies n
e
software.
7
t
ing to Your
F
i
o
ur device.
t
your computer o
r
Fi, and search for a
v
fer to your Wi-Fi-en
a
on how to search f
o
e
r, you need to set y
o
atically.
Wi-Fi name (SSID
)
i
-Fi password if nec
e
f
er to the chapter
G
a
ssword to get th
he client device is
.
S
B Cable
o
mputer to your dev
i
y
our device. The o
p
e
w hardware, and
Device
r
other client devic
v
ailable wireless net
w
a
bled client device m
a
o
r wireless networks
o
ur computer to obt
a
)
of your device,
a
e
ssary, and click OK.
G
etting to Know t
h
e default Wi-Fi S
S
connected to you
i
ce with a USB cabl
e
p
erating system det
e
automatically ins
t
es have
w
orks.
a
nual for
. If you
a
in an IP
a
nd click
h
e Wi-Fi
S
ID and
r device
e
.
e
cts and
t
alls the
NOTE:
If the system d
double-click t
h
install the soft
w
3. Wait until
successfully
Getting
t
Passwo
r
You can view
SSID and pas
s
Logging
Hotspot
1. Ensure that
client devic
e
2. Launch the
http:/
/
ufi.zt
e
3. Enter the
p
configuratio
n
NOTE:Th
e
8
oes not automaticall
y
h
e device installatio
n
w
are.
the computer is
.
t
o Know th
e
r
d
the label on the de
v
s
word.
in to t
h
Configurati
the connection be
e
is correct.
Internet browser an
d
e
device.com in the
a
p
assword to log in
n
page.
e
default password i
s
y
launch installation,
n
icon in My Com
connected to you
r
e
Wi-Fi SSI
D
v
ice to get the defa
h
e 4G M
on Page
tween your device
d
enter http://192.1
6
a
ddress bar.
to the 4G Mobile
s
admin.
you can
pute
r
to
r
device
D
and
ult Wi-Fi
obile
and the
6
8.0.1 or
Hotspot
9
Changing the Wi-Fi SSID or
Password
1. Log in to the 4G Mobile Hotspot configuration page.
2. Select Wi-Fi Settings.
3. Change the Network Name (SSID) or the Password in the
Main SSID area.
4. Click Apply.
Accessing the Internet
After a client device is successfully connected to your device,
you can access the Internet in Automatic or Manual mode. The
default mode is Automatic.
Mode Operation
Automatic Your device is automatically connected to the
Internet, and you can surf on the Internet
through the client.
Manual 1. Log in to the 4G Mobile Hotspot
configuration page.
2. In My router section, select LTE (or other
network type) Settings > Connection
Mode > Manual, and then click Apply.
10
3. Click to return to the home page,
and then click or .
NOTE:
• To change current connection setting, please disconnect
from network.
• To modify the parameters of your device, log in to the 4G
Mobile Hotspot configuration page.
Configuring Your PC
The following procedure describes how to configure the Internet
Protocol in Windows 7 for your Wi-Fi connection.
1. Right-click Network and select Properties.
2. Select Change adapter settings.
3. Right-click Wireless Network Connection and select
Properties.
4. Select Internet Protocol Version 4 (TCP/IPv4),and click
Properties.
5. Select Obtain an IP address automatically and Obtain
DNS server address automatically, and click OK.
Indice
Altri manuali Zte Router wireless
Zte
Zte Unite II Manuale utente
Zte
Zte MC801A Manuale utente
Zte
Zte MF63 Manuale utente
Zte
Zte Jetpack 890L Manuale utente
Zte
Zte MF93D Manuale utente
Zte
Zte ZXHN H268A Manuale utente
Zte
Zte MF980 Manuale utente
Zte
Zte OPTUS MF920V Manuale utente
Zte
Zte Centinel MF275/9 Manuale utente
Zte
Zte AC30 Manuale utente
