ZyXEL Communications ZyWall1 Manuale utente

ZyWALL 1

Internet Security Gateway

Quick Start Guide

Version 3.50

November 2001

ZyWALL 1 Internet Security Gateway

Introduction

About Your ZyWALL 1 Internet Security Gateway

The ZyWALL 1 is a dual Ethernet Internet Security Gateway with an integrated

firewall and network management features designed for telecommuters and

home offices to access the Internet via cable or xDSL modem.

By integrating NAT (SUA), firewall and VPN capabilities, the ZyWALL 1

provides not only ease of installation and Internet access, but also a complete

security solution that protects your Intranet and efficiently manages data traffic

on your network. Other key features include content filtering and a four-port

10/100Mbps auto-negotiating Ethernet LAN switch.

The embedded web configurator provides easy network management and is

totally independent of your operating system.

Packaging List

The following items come with your ZyWALL 1.

!This Quick Start Guide

!One 5 VDC power adapter

!One Supporting CD (includes a User's Guide and Support Notes)

!One straight-through Ethernet cable

Online Registration

Don’t forget to register your ZyXEL product (fast, easy online registration at

www.zyxel.com) for free future product updates and information.

ZyWALL 1 Internet Security Gateway

Hardware Installation

The Front Panel

The LEDs on the front panel indicate the operational status of the ZyWALL.

Description of LEDs

LED COLOR STATUS DESCRIPTION

On The ZyWALL is receiving power.

Flashing The ZyWALL is performing a self-test.

SYS Green

Off The ZyWALL is not receiving power.

On The WAN link is connected.

Flashing The 10M WAN link is sending/receiving

packets.

WAN Green

Off The WAN link is not ready or has failed.

On The ZyWALL is connected to a 10M LAN.

Flashing The 10M LAN is sending/receiving packets.

Green

Off The 10M LAN is not connected.

On The ZyWALL is connected to a 100Mbps

LAN.

Flashing The 100M LAN is sending/receiving packets

LAN

1,2,3,4

Orange

Off The 100M LAN is not connected.

ZyWALL 1 Internet Security Gateway

Rear Panel and Connections

WAN 10M Port

Connect the WAN port on the ZyWALL to the Ethernet port on the cable or

xDSL modem using the Ethernet cable that came with your modem. The

Ethernet port on a cable modem is sometimes labeled "PC" or "Workstation".

LAN 10/100M Ports

When the ZyWALL is on and properly connected to a

computer or a hub, the corresponding LAN LED on the

front panel turns on.

For more than four computers, use an external hub.

LAN 10/100M

PORT NUMBER ETHERNET CABLE TYPE

COMPUTER HUB

1 straight-through crossover

2 straight-through crossover

3 straight-through crossover

4 UPLINK button

“on” (pushed in) straight-through crossover

4UPLINK button

“off” (out) crossover straight-through

ZyWALL 1 Internet Security Gateway

POWER 5VDC Port

Use only the included 5 VDC power adapter or one with the

same specifications.

Connect the female end of the power adapter to the port labeled POWER

5VDC on the rear panel of your ZyWALL.

Additional Installation Requirements

1. A computer(s) with an installed Ethernet NIC (Network Interface Card).

2. A cable/xDSL modem and an ISP account.

Turning on Your ZyWALL

Plug the male end of the power adapter into a power outlet. The SYS LED turns

on. The WAN and the LAN LED(s) turn on after the system tests are complete,

if the WAN and LAN ports are properly connected.

RESET Button

If you forget your password or cannot access the ZyWALL, use the RESET

button on the rear panel of the ZyWALL to reinstall the factory default

configuration (rom) file. Uploading the factory default configuration file

replaces the current configuration file with the default configuration file and

deletes all customer-made ZyWALL configurations. The Password resets to

“1234” and the IP address resets to 192.168.1.1.

Using the RESET Button

1. Use a pointed object to press the RESET button for five seconds, then

release it.

2. If the LAN LEDs flash within 30 seconds, the factory defaults have been

restored and the ZyWALL restarts. Otherwise, go to step 3.

3. Turn the ZyWALL off.

4. While pressing the RESET button, turn the ZyWALL on.

5. Continue to hold the RESET button for about 30 seconds. The ZyWALL

restarts.

6. Release the RESET button and wait about ten seconds for the ZyWALL to

finish restarting.

ZyWALL 1 Internet Security Gateway

Preparing Your Network

Since most Internet/network-related protocols are dependent on TCP/IP, you

need to install and configure TCP/IP on your computer before you can access

the Internet.

Windows 95/98/Me/NT/2000, Macintosh OS 7 and later operating systems and

all versions of UNIX (including Linux) include the software components you

need to install and use TCP/IP on your computer.

After the appropriate TCP/IP components are installed, configure the TCP/IP

settings in order to "communicate" with your network. The ZyWALL assigns

these factory default values if you configure TCP/IP using DHCP:

•IP address: between 192.168.1.33 and 192.168.1.64

•Subnet Mask: 255.255.255.0

•Default Gateway: 192.168.1.1 (the ZyWALL)

Do not assign an arbitrary IP address or subnet mask to

your computer, if you do, you will not be able to access the

Internet.

Windows 95/98/Me

Installing TCP/IP Components

1. Click Start in the task bar (usually in the screen’s lower left-hand corner).

2. Click Settings and then Control Panel.

3. In the Control Panel window, double-click the Network icon.

The Network window displays a list of installed components. You need a

network adapter, the TCP/IP protocol and Client for Microsoft Networks.

If you need the adapter:

a. In the Network window, click Add.

b. Select Adapter and then click Add.

c. Select the manufacturer and model of your network adapter and then click

OK.

If you need TCP/IP:

ZyWALL 1 Internet Security Gateway

a. In the Network window, click Add.

b. Select Protocol and then click Add.

c. Select Microsoft from the list of manufacturers.

d. Select TCP/IP from the list of network protocols and then click OK.

If you need Client for Microsoft Networks:

a. Click Add.

b. Select Client and then click Add.

c. Select Microsoft from the list of manufacturers.

d. Select Client for Microsoft Networks from the list of network clients and

then click OK.

e. Restart your computer so the changes you made take effect.

Configuring TCP/IP

Configuring Dynamic TCP/IP Properties

1. In the Network window, click the TCP/IP entry to select it and click the

Properties button.

2. In the TCP/IP Properties window, select Obtain an IP address

automatically.

3. Click the WINS Configuration tab and select Disable WINS Resolution.

4. Click the Gateway tab. Highlight any installed gateways and click the

Remove button until there are none listed.

5. Click the DNS Configuration tab and select Disable DNS.

6. Click OK to save and close the TCP/IP Properties window.

7. Click OK to close the Network window. Insert the Windows CD if

prompted.

8. When the drivers are updated, you will be asked if you want to restart your

computer. Make sure your ZyWALL is on before clicking Yes at the

prompt.

Configuring Static TCP/IP Properties

1. In the Network window, click the TCP/IP entry to select it and click the

Properties button.

ZyWALL 1 Internet Security Gateway

2. In the TCP/IP Properties window, select Specify an IP address.

3. Type your information into the IP Address and Subnet Mask fields.

4. Click the Gateway tab. Highlight any installed gateways and click the

Remove button until there are none listed. Type your gateway address in

the New gateway field and click Add.

5. Click the DNS Configuration tab and select Enable DNS. Make sure all

the fields in this tab are correct.

6. In the TCP/IP Properties window, click OK.

7. In the Network window, click OK.

8. Restart your computer if prompted, making sure that your ZyWALL is

turned on first.

Verifying TCP/IP Properties

1. In the taskbar, click Start and then Run.

2. In the Run window, type "winipcfg" and then click OK. The IP

Configuration window opens and lists information such as your computer's

IP address, subnet mask and default gateway.

3. Select your network adapter.

4. When using DHCP, the default TCP/IP values assigned by the ZyWALL

(shown earlier) are now displayed.

Windows NT/2000

Installing TCP/IP Components

TCP/IP should already be installed on Windows NT and 2000 systems.

Configuring TCP/IP

Configuring Dynamic TCP/IP Properties

1. Click Start in the task bar (usually at the lower left-hand corner of the

screen).

2. Click Settings and then Control Panel.

3. In the Control Panel window, double-click the Network and Dial-up

Connections icon.

4. Right-click the Local Area Connections icon and click Properties.

ZyWALL 1 Internet Security Gateway

5. Select the Internet Protocol (TCP/IP) entry and click the Properties

button.

6. Select Obtain an IP address automatically and click the Advanced

button.

7. Select any installed gateways and click Remove until there are none listed.

8. Click the WINS tab and select any WINS addresses. Click Remove until

there are none listed.

9. Click the DNS tab and select any DNS addresses. Click Remove until there

are none listed.

10. Click OK to save and close the Advanced TCP/IP Settings window.

11. Click OK to close the Internet Protocol (TCP/IP) Properties window.

Restart your computer if prompted, making sure that your ZyWALL is

turned on first.

Configuring Static TCP/IP Properties

1. In the Network and Dial-up Connections window, click the TCP/IP entry

to select it and click the Properties button.

2. In the TCP/IP Properties window, select Use the following IP Address.

3. Type your information into the following fields: IP address, Subnet mask,

Default gateway, Preferred DNS server, Alternate DNS server

(optional).

4. Click OK to save and close the Internet Protocol (TCP/IP) Properties

window.

5. Click OK to close the Local Area Connection Properties window.

6. Restart your computer if prompted, making sure that your ZyWALL is

turned on first.

Verifying TCP/IP Properties

1. In the taskbar, click Start, Programs, Accessories and then Command

Prompt.

2. In the Command Prompt window, type "ipconfig" and then press

[ENTER]. The window will display information about your connection-

specific DNS suffix, IP Address, Subnet Mask and Default Gateway.

ZyWALL 1 Internet Security Gateway

Macintosh

Installing TCP/IP Components

TCP/IP should already be installed on Macintosh OS 7 and later systems.

Configuring TCP/IP Properties

1. Click the Apple icon (located in the upper left corner of your screen), select

Control Panels and then TCP/IP.

2. From the "Connect Via" box, select Ethernet.

3. For dynamically assigned settings select Using DHCP Server from the

"Configure" box; for statically (manually) assigned settings see the

following:

a. From the "Configure" box, select Manually.

b. Enter your IP Address in the IP Address box.

c. Enter your subnet mask in the Subnet mask box.

d. Enter the IP address of your ZyWALL in the Router address box.

e. To use a name server, enter its address in the Name server address

box.

4. Close the TCP/IP Control Panel.

5. Click Save if prompted, to save changes to your configuration.

6. Restart your computer, making sure that your ZyWALL is turned on first.

Verifying TCP/IP Properties for the Macintosh

After your Macintosh is configured and has restarted, go back to the TCP/IP

Control Panel. When using DHCP, the default TCP/IP values assigned by the

ZyWALL (shown earlier) are now displayed.

Indice

Altri manuali ZyXEL Communications Portale

ZyXEL Communications

ZyXEL Communications EMG2881-T20A Manuale utente

ZyXEL Communications

ZyXEL Communications UAG4100 Manuale utente

ZyXEL Communications

ZyXEL Communications P-660HN-T1A Manuale

ZyXEL Communications

ZyXEL Communications VSG1435-B101 - V1.10 Manuale utente

ZyXEL Communications

ZyXEL Communications ZyWall USG 50-H Series Manuale utente

ZyXEL Communications

ZyXEL Communications VMG1312-T20A Manuale utente

ZyXEL Communications

ZyXEL Communications P-2602HW-D1A Manuale utente

ZyXEL Communications

ZyXEL Communications ADSL 2+ Security Gateway Manuale utente

ZyXEL Communications

ZyXEL Communications MAX208M Manuale utente

ZyXEL Communications

ZyXEL Communications ZyWALL USG100-Plus Manuale utente

ZyXEL Communications

ZyXEL Communications MAX308M Series Manuale utente

ZyXEL Communications

ZyXEL Communications ZYWALL USG 200 UNIFIED Manuale utente

ZyXEL Communications

ZyXEL Communications Unified Security Gateway ZyWALL 300 Manuale utente

ZyXEL Communications

ZyXEL Communications P-660HN-51 - V1.10 Manuale utente

ZyXEL Communications

ZyXEL Communications ADSL 2+ Security Gateway Manuale utente

ZyXEL Communications

ZyXEL Communications EX5510-B0 Manuale utente

ZyXEL Communications

ZyXEL Communications P-660HWP-D1 Manuale utente

ZyXEL Communications

ZyXEL Communications ZyWALL 1050 Manuale utente

ZyXEL Communications

ZyXEL Communications EMG2306-R10A Manuale utente

ZyXEL Communications

ZyXEL Communications PK5001Z Manuale utente

ZyXEL Communications

ZyXEL Communications Prestige 314 PLUS Manuale

ZyXEL Communications

ZyXEL Communications ZYAIR B-4000 Manuale utente

ZyXEL Communications

ZyXEL Communications P-661HNU-FX Manuale utente

ZyXEL Communications

ZyXEL Communications VSG-1200 Manuale utente

Manuali Portale popolari di altre marche

LST

LST M500RFE-AS Manuale utente

Kinnex

Kinnex Media Gateway Manuale utente

2N Telekomunikace

2N Telekomunikace 2N StarGate Manuale utente

Mitsubishi Heavy Industries

Mitsubishi Heavy Industries Superlink SC-WBGW256 Manuale utente

Telsey

Telsey CPVA 500 - SIP Manuale utente

RTA

RTA 460A-NNA4 Scheda tecnica

Shaw

Shaw Gateway HDPVR Manuale utente

ABB

ABB VSN900 Guida rapida

Commander

Commander Pulse Manuale utente

2N Telekomunikace

2N Telekomunikace ATEUS EasyGate 501309E Manuale utente

NETGEAR

NETGEAR C6300BD Manuale utente

Amit

Amit CDW531AM Manuale utente

HMS

HMS Netbiter EasyConnect EC150 Manuale utente

Huawei

Huawei EchoLife HG620 Manuale utente

AT&T

AT&T U-verse 3801 Manuale per l'uso e la cura

Logic IO

Logic IO RTCU MX2 turbo Manuale utente

Suttle

Suttle MediaMAX MXM-521 Manuale utente

RTA

RTA 460MCBC-N2E Scheda tecnica