2N 914421B Manuale utente
Installation manual 2N® SIP
Speaker, Wall Mounted
v.2.10
www.2n.com
Installation manual 2N® SIP Speaker, Wall Mounted
2 / 27
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Content:
1. Product Overview
1.1 Components and Associated Products
1.2 Terms and Symbols
2. Description and Installation
2.1 Before You Start
2.2 Mechanical Installation
2.3 Electric Installation
2.4 Product Description
3. Function and Use
3.1 Configuration
3.2 Default Reset
3.3 Basic Functions
3.4 Downloads
4. Technical Parameters
5. Supplementary Information
5.1 Troubleshooting
5.2 Directives, Laws and Regulations
5.3 General Instructions and Cautions
Installation manual 2N® SIP Speaker, Wall Mounted
3 / 27
•
•
•
•
•
•
•
•
•
•
•
•
•
1. Product Overview
In this section, we introduce the2N®SIPSpeaker, Wall Mountedproduct, outline its
application options and highlight the advantages following from its use. The section also
includes safety precautions.
Here is what you can find in this section:
1.1 Components and Associated Products
1.2 Terms and Symbols
Basic Properties
2N®SIPSpeaker, Wall Mountedis a versatile sound transmission system for IP networks. It is
designed as a universal VoIP telephone with an audio output. It finds a variety of applications –
in schools, hospitals, office buildings, hotels, production halls, shopping centres, bus terminals,
airports and so on.
2N®SIPSpeaker, Wall Mountedis a stand-alone SIP-based sound decoder and converter with
an amplifier.2N®SIPSpeaker, Wall Mountedcommunicates with the other audio system
components via the SIP Proxy or directly via a specified address.
You can manage your2N®SIPSpeaker, Wall Mountedunit via a configuration web interface.
Advantages of Use
Operable in the Ethernet network
Ethernet-based power supply – PoE
SIP
Integrated administration web server
Streamed audio support
Applicable as standard VoIP telephone/communicator
DTMF detection according to RFC2833, in-band and SIP-INFO
Basic Features
10/100Base-TX LAN interface
12 V DC / 1,8 A or PoE 802.3af supply
Integrated 12 W amplifier
Line output
Installation manual 2N® SIP Speaker, Wall Mounted
4 / 27
•
•
•
•
1.1 Components and Associated Products
Basic Unit
2N Part No.914421B
Axis Part No.
01431-001
2N®SIP Speaker, Wall Mounted
Black colour
2N Part No.914421W
Axis Part No.
01432-001
2N®SIPSpeaker, Wall Mounted
White colour
Installation manual 2N® SIP Speaker, Wall Mounted
5 / 27
•
•
•
•
•
•
Power Supply
Part Numbers:
91378100, 01394-00
91378100E
91378100US,
01403-001
PoE injector – without cable
PoE injector – with EU cable
PoE injector – with US cable
For power supply of intercom via ethernetcable when PoE
switch is not available.
Part No.91341481E
Stabilised 12 V / 2 A power supply needs to be used when no PoE
is available.
Part No.932928
For external power supply of the lock with 12 V AC voltage.
Installation manual 2N® SIP Speaker, Wall Mounted
6 / 27
•
•
•
•
•
•
VoIP Telephones
2N Part No.91378357
Axis Part No. 01422-001
Grandstream GXV3240 VoIP video telephone
GXV3240 is the successor to the popular GXV3140
model, which allows comfortable video calls in the
IP network. Touchscreen and keyboard control.
2N Part No.91378358
Axis Part No. 01421-001
Grandstream GXV3275 VoIP telephone
GXV3275 is the successor to the popular GXV3175
model, which allows comfortable video calls in the
IP network. Touchscreen control.
Accessories
2N Part No.9137410E
Axis Part No. 01397-001
External IP Relay – 1 output
Standalone IP device which can be controlled
byHTTPcommands sent by Helios IP intercom, which
can thus control devices on unlimited distance.
Installation manual 2N® SIP Speaker, Wall Mounted
7 / 27
•
•
•
•
•
2N Part No.9137411E
Axis Part No. 01398-001
External IP Relay – 4 outputs, PoE
Standalone IP device which can be controlled
byHTTPcommands sent by Helios IP intercom, which
can thus control devices on unlimited distance.
Part No. 9159014EU/US/UK
2N®2Wire
(set of 2 adaptors and power source for EU/US/UK)
The 2N®2Wire converter allows you to use existing
wiring (2 wires) from your original door bell or door
intercom to connect any IP device. You don’t have to
configure anything, and you only need one 2N®2Wire
unit at each end of the cable and a power source
connected to at least one of these units.
The 2N®2Wire unit then providesPoEpower not only
to the second converter, but also to all other
connected IP end devices.
1.2 Terms and Symbols
The following symbols and pictograms are used in the manual:
•
Tip
For more accessories and particular advice please contact your local distributor of
2N products.
•
Safety
Always abide by this information to prevent persons from injury.
•
Warning
Always abide by this information to prevent damage to the device.
Installation manual 2N® SIP Speaker, Wall Mounted
8 / 27
•
Caution
Important informationfor system functionality.
•
Tip
Useful informationfor quick and efficient functionality.
•
Note
Routines or advice for efficient use of the device.
Installation manual 2N® SIP Speaker, Wall Mounted
9 / 27
•
•
•
•
•
•
•
•
•
2. Description and Installation
In this section, we describe the2N®SIPSpeaker, Wall Mountedproduct and its installation.
Here is what you can find in this section:
2.1 Before You Start
2.2 Mechanical Installation
2.3 Electric Installation
2.4 Product Description
2.1 Before You Start
Product Completeness Check
Before installing this product, check whether the product delivery includes:
1x2N®SIPSpeaker, Wall Mounted
Quick User Manual
Installation Conditions
2N®SIPSpeaker, Wall Mountedis to be connected to the LAN.
2N®SIPSpeaker, Wall Mountedis designed for indoor use.
2N®SIPSpeaker, Wall Mountedmay not be operated in damp environment.
2.2 Mechanical Installation
Surface Mounting
To mount your2N®SIPSpeaker, Wall Mountedunit on a wall or another solid surface use the
speaker holder. This holder fit with screws to keep the device in place. Follow the figure below
while drilling the mounting holes.
Mounting holes
Installation manual 2N® SIP Speaker, Wall Mounted
10 / 27
•
•
•
Speaker Holder
2.3 Electric Installation
Electric Installation Step by Step
It is very easy to connect2N®SIPSpeaker, Wall Mountedelectrically. Follow the steps below to
avoid equipment damage or electrical injury:
Connect the aditional speaker
Connect the UTP cable.
Connect a 12 V power supply (unless PoE is used).
Loudspeaker Connection
2N®SIPSpeaker, Wall Mountedis equipped with a power amplifier for 1 or 2 loudspeakers. The
loudspeakers to be used must have the nominal impedance of 8 Ωeach. Refer to the table
below for possible configurations and related maximum power outputs (sinus, THD < 1 %):
•
•
Caution
Be sure to connect the 2N®SIP Speaker, Wall Mounted power supply as the last
step. The same applies to PoE supply from the LAN.
We recommend the use of a shielded SSTP Ethernet cable.
Altri manuali per 914421B
1
Questo manuale è adatto per i seguenti modelli
3
Indice
Altri manuali 2N Altoparlanti
