66audio REVOLUTION Manuale utente
USER GUIDE
REVOLUTION
2
SAFETY &
GENERAL
INFORMATION
Please read the following information
before using this product:
To avoid hearing damage, make sure that the volume on your
transmitting device is turned down before connecting your
REVOLUTION. After placing the headphones on your ears,
gradually turn up the volume until you reach a comfortable listening
level. Noise levels are measured in decibels (dB) and exposure to
any noise at or above 85 dB can cause gradual hearing loss.
Users are not permitted to make changes or modify the product and
the accessories in any way.
Do not use the product while operating a motor vehicle.
To avoid electronic interference, turn off the headphones in any
facilities where posted notices instruct you to do so, for example:
aircraft, military bases, hospitals, health care facilities, etc.
Keep away from re, water, and high voltage equipment.
Follow the charging procedure described in this guide to charge the
REVOLUTION.
3
CHARGING THE
REVOLUTION
First time use
Charging the battery before use is recommended but not
required. The headphones ship pre-charged, however, the
initial charge may vary. Low battery is indicated by the
status LED ashing red with an audible tone heard every
20 seconds.
Charging using the USB cable
The headphones include a Micro USB cable that can be
connected to your computer or other devices made for
USB charging. Plug the Micro USB charging cable into
the charging port of the REVOLUTION located below the
Pair button. Plug in the other end of the cable into a USB
port on a PC, Mac or USB wall outlet. The status LED will
be red while charging and will turn off when fully charged.
4
1Power switch
2Pair button
3USB charging port
43.5mm audio input
5Volume +
6 Volume -
7Microphone
8ANC (Active Noise
Cancellation) switch
9NFC
10 Folding Hinges
11 LED Indicator
12 Multifunction button
This image is for reference only.
Please check the product
for details.
THE
REVOLUTION
1
2
3
4
8
9
510
611
712
5
Pair Mode
Ensure that your smartphone or
music player is powered on.
Press and hold the Pair button for 3
seconds until the status LED begins
to ash both blue and red. You
will also hear an audible
“pairing” tone.
You are now in Pair Mode and
your device will be able to see
the REVOLUTION for pairing.
PAIRING
AND POWER
ON/OFF
Power On/Off
To turn the headphones
on, simply slide the Power
button down.
To turn the headphones off,
slide the Power button up.
6
Pairing (Detailed Step-by-Step Instructions)
1. Make sure your REVOLUTION is powered on.
2. Keep the REVOLUTION and your device within 10 feet
while pairing.
3. Place the REVOLUTION into Pair Mode by pressing and
holding the Pair button for 3 seconds until the status LED
begins to ash both blue and red.
4. In your device settings, begin searching/scanning for
Bluetooth devices.
5. The REVOLUTION will appear in the list of available
devices as “66 REVOLUTION”.
6. Tap the REVOLUTION name to connect and pair.
7. You are now paired and the status LED will intermittently
ash blue to indicate successful connection. You will also
hear an audible from the headphones.
• If pairing is not successful, switch off the REVOLUTION by sliding the Power
button up and then re-pair using to the steps outlined above.
• After pairing is successful, paired devices will remember each other unless
pairing information is deleted. There is no need to pair again.
• When turned on, the REVOLUTION will automatically connect with the most
recent paired device. If you want to pair with other Bluetooth devices, switch off
the Bluetooth function of your current paired device, then pair the REVOLUTION
with the new Bluetooth device according to the steps outlined above.
PAIRING
(STEP BY
STEP)
7
Adjusting Volume
Press the Volume +/- button to adjust the volume. One short press
will adjust one interval. When the volume reaches maximum or
minimum volume, the REVOLUTION will alert you with an audible
tone.
Note: Volume can be adjusted using either your headphone or your music device.
Play/Pause Music
Press the Multifunction button one time to play or pause music.
Skip Tracks
To skip to the next track when music is playing, press and hold the
volume (+) button for 2 seconds. To go back to the previous track,
long-press the volume (-) button for 2 seconds.
Active Noise Cancellation (ANC)
ANC technology in the REVOLUTION actively monitors ambient
sound to reduce background noise and provide an optimal
listening experience in loud environments. To enable the Active
Noise Cancellation (ANC) feature, slide the ANC switch down.
The LED indicator will illuminate to show that ANC is active.
LISTENING
TO MUSIC
8
Connecting via the 3.5mm Audio Cable
The REVOLUTION has the ability to connect with non-Bluetooth
enabled devices using the provided 3.5mm stereo headphone
cable.
To connect, plug the 3.5mm audio cable into the headphone
jack under the Multifunction button on the headphones and plug
the other end of the cable into your non-Bluetooth audio source
device.
Note: The audio cable will allow you to listen to music even if the REVOLUTION
is turned off. It also allows you to use the REVOLUTION in places where wireless
signals are restricted.
LISTENING
TO MUSIC,
CONT’D
9
Receiving a Phone Call
The REVOLUTION is equipped with
an omnidirectional, noise-cancelling
microphone featuring Clear Voice
Capture (cVc®) technology for optimal
call clarity.
If music is playing while an incoming
call is received (or an outgoing call
is initiated), the headphones will
automatically pause music and enable
hands-free voice audio. Press the
Multifunction button once to accept an incoming call, then speak
in any position to communicate with the other party.
After the call has ended, music will automatically resume playing.
Note: When pressing the Multifunction button to answer or end a call, only press one
time. Do not press and hold.
CALL
OPERATION
10
CALL
OPERATION,
CONT’D
Making a Call
1. Use the keypad on your smartphone to dial
the desired number.
2. Press the “Send” or “Dial” key on your smartphone
to initiate the call.
3. The call is automatically routed to the headphones.
Voice Dialing
1. Enable the voice recognition function on your smartphone.
2. Hold down the Multifunction button on the headphones for 2
seconds. You will hear a beep.
3. Clearly say the name of the person you wish to call.
Ending a Call
Use either of the following methods to end a call:
• Press the Multifunction button one time to end a call from the
headphones.
• End a call via your smartphone.
If you are listening to music when making a call or receiving a
call, the headphones will switch the wireless connection from the
Advanced Audio Distribution Prole (A2DP) to the Hands-Free
Prole (HSP or HFP). Music will be temporarily paused. After the
call ends, music will automatically resume playing.
Indice
Altri manuali 66audio Cuffie
