A-Trend ATC-2000 Manuale utente
Table of Contents
JUMPER & CONNECTOR LOCATION DIAGRAM.............A
CHAPTER 1 INTRODUCTION..........................................2
1-1 SYSTEM FEATURES.........................................................3
1-2 CHECK LIST OF THE PACKING........................................4
CHAPTER 2 INSTALLATION...........................................5
2-1 INSTALLATION PROCEDURES .......................................5
2-2 CPU INSTALLATION..........................................................6
2-3 SYSTEM MEMORY INSTALLATION..................................11
2-4 SRAM INSTALLATION.......................................................13
2-5 OTHER JUMPERS AND CONNECTORS
DESCRIPTION ..................................................................14
2-6 IDE DRIVER INSTALLATION.............................................1
CHAPTER 3 AWARD BIOS SETUP.................................20
3-1 UPDATE BIOS PROCEDURES..........................................21
3-2 AWARD SYSTEM BIOS CONFIGURATION SETUP.........22
APPENDIX A ......................................................................46
CHAPTER 1 INTRODUCTION
This manual introduces how to configure the ATC-2000 mainboard for
different environments. It's an overview of the layout and features of the
mainboard, and also rovides information for
you to change the configuration or system environment.
This manual is divided into two sections :
PART ONE includes age A which contain layout diagram of
the mainboard. Please refer it when you configure the system.
PART TWO includes three cha ters as following:
Cha ter 1 is an overview of the mainboard features and acking
contents of the mainboard.
Cha ter 2 describes how to u grade and to change hardware
configurations such as memory size, CPU ty e, and lists of
jum er settings and connectors.
Cha ter 3 is the user's guide of AWARD BIOS setu utility,
and Flash ROM BIOS u date rocedure. The menu showed in
this cha ter are default settings.
Your system dealer will set u the mainboard according to your
demand of com uter. It means that the current settings of your
mainboard's current setting may not be the same as the defaults shown
in this user's manual. If you need to change your
configuration, lease ask your dealer firstly, be sure this will not
against your system warranty. Or ask for your dealer to do it for you.
REMARK
Intel® is a registered trademark of Intel Cor oration.
MS-DOS® is a registered trademark of Microsoft Cor oration.
All other brands and roduct names are trademarks registered trademarks of their res ective
com anies.
1-1 SYSTEM FEATURES
:P54C, P55C Pentium level CPU o erating at 75 MHz to 200MHz with
321- in ZIF socket 7 and scalability to acce t rocessor in the
future.
:INTEL 82430HX PCIset.
:Using four 72- in SIM sockets, rovides two banks of 64-bit wide ath
u to 256MB addressing age mode DRAMs.
:Su orting all ty es of DRAM included ECC (Error Checking and
Correcting) or arity, EDO (Extended Data Out), BEDO (Burst EDO),
or FPM (Fast Page Mode).
:Su orting four PCI bus master revision 2.1, 5V interface com liance
and four 16-bit ISA slots.
:Dual Master IDE connectors su ort u to four devices in two
channels for connection of high ca acity hard disk drive, CD-ROM
drive, ta e backu etc..
:Su orting the USB (Universal Serial Bus) connector.
:"True" Green ower management for CPU sto clock state.
:AT style keyboard connector and PS/2 mouse connector.
:Winbond 83877 high-s eed Multi-I/O chi set:
:Su orting Infrared transfer (IrDA TX/RX) connection.
:One FDC ort su orts two devices u to 2.88MB
:Two 16550A fast UARTs com atiable serial orts
:One EPP/ECP mode arallel ort
:Hardware Dimension is 220mm x 280mm (8.66" x 11.02") with four layers
designed.
1-2 CHECK LIST OF THE PACKIN
The mainboard comes securely acked in a durable box and shi ing
carton. If any of the above items are missed or damaged, lease
contact your su lier.
Each mainboard containing:
Q'TY Descri tion
1 Mainboard : ATC-2000.
1 Diskette : Enhanced IDE driver (3.5").
1 Cable : Enhanced IDE connector.
1 Cable : F.D.D. connector.
1 Cable : Serial ort.
1 Cable : Serial/Parallel.
1 Manual : User`s manual.
NOTE : Leave the mainboard in its original acking until you are ready to
install it.
CHAPTER 2 INSTALLATION
2-1 INSTALLATION PROCEDURE
Before installing the com uter, lease re are all com onents such as
CPU, DRAM; eri herals such as hard disk drive, keyboard, CD-ROM
drive; and accessories such as cables. Then, install the system as following
.
1. Plug CPU (w/ heat sink and cooling fan), DRAM modules in the
mainboard.
2. Set jum ers based on your configuration.
3. Plug add-on cards in PCI or ISA slots.
4. Connect cables to eri herals, ower su ly..
5. Make sure all com onents and devices are well connected,
turn on the ower and setu System BIOS based on your
configuration.
6. Install eri heral, add-on card drivers and test them.
7. If all of above rocedures are success, turn-off the ower then
lug all of them into your com uter case.
2-2 CPU INSTALLATION
ATC-2000 su orts P54C and P55C ty es of CPUs u to 200MHz. For
installation, lease notice CPU in 1 must align with the ZIF socket 7 Pin 1
location.
In the 2-2-1 describes the jum er setting for each brand of CPU. If your
CPU is not in the list of 2-2-1, lease refer to 2-2-2 and 2-2-3 for installation.
2-2-1 CPU TYPE SELECTION
A. INTEL PENTIUM CPU (P54C)
JP10JP11
1-21-2
CPU Core VoltageVRESTD
JP91-23-4
INTERNAL CPU CLOCK JP7 JP8 JP3 JP4 Ext.x Frq.
75MHz close close 1-2 1-2 50x1.5
90MHz o en close 1-2 1-2 60x1.5
100MHz close o en 1-2 1-2 66x1.5
120MHz o en close 2-3 1-2 60x2.0
133MHz close o en 2-3 1-2 66x2.0
150MHz o en close 2-3 2-3 60x2.5
166MHz close o en 2-3 2-3 66x2.5
STD is ႑standard႑
(The fourth line of the mark on the under-side
of the rocessor contains a code that identifies
the voltage level ty e. V is VRE, S is standard. )
xxxxxxxxx
xxxxxxxxx
xxxxxxxxx
Sxxxx/SMU
Intel Pentium CPU,
the first letter after
႑/ ႒denotes voltage
ty e.
180MHz o en close 1-2 2-3 60x3.0
200MHz close o en 1-2 2-3 66x3.0
B. INTEL PENTIUM CPU (P55C)
Besides CPU clock setting, for P55C (MMX) CPU you have to set JP10/
JP11/JP12/JP13 based on its CPU I/O voltage, and JP9 based on its
core voltage.
CPU Core Voltage3.52V3.3V2.9V2.8V*2.7V
JP91-23-45-67-89-10
*Currently, Intel P55C is released 2.8V core voltage only.
Please confirm this with your system su lier before you
install P55C CPU.
I/O VOLTA E JP10 JP11 JP12 JP13
VI/O = 3.3V 2-3 2-3 close o en
INTERNAL CPU CLOCK JP7 JP8 JP3 JP4 Ext.x Frq.
166MHz close o en 2-3 2-3 66x2.5
180MHz o en close 1-2 2-3 60x3.0
200MHz close o en 1-2 2-3 66x3.0
JP10
JP11
JP13
JP12
C. Cyrix 6x86 CPU
¡Cyrix 6x86
JP9JP10JP11
1-21-21-2
INTERNAL CPU CLOCK JP7 JP8 JP3 JP4 Ext.x Frq.
P120+ @ 100MHz close close 2-3 1-2 50x2.0
P150+ @ 120MHz o en close 2-3 1-2 60x2.0
P166+ @ 133MHz close o en 2-3 1-2 66x2.0
¡ Cyrix 6x86L CPU
CPU JP9 JP10 JP11 JP12 JP13
Cyrix 6x86L 7-8 2-3 2-3 close o en
INTERNAL CPU CLOCK JP7 JP8 JP3 JP4 Ext.x Frq.
P120+ @ 100MHz close close 2-3 1-2 50x2.0
P133+ @ 110MHz o en o en 2-3 1-2 55x2.0
P150+ @ 120MHz o en close 2-3 1-2 60x2.0
P166+ @ 133MHz close o en 2-3 1-2 66x2.0
D. AMD K5CPU
JP9JP10JP11
1-21-21-2
(Cyrix logo)
6x86-Pxxx+GP
xxxMHz
3.52V(028)
(Cyrix logo)
6x86L-P150+GP
120MHz
2.8V
The bottom line of the mark on the
rocessor contains a code 028 that
identifies the voltage level ty e. If the
code is 016 or others, or no marking then
lease contact your dealer.
The mark on the rocessor contains as
the sam le in the left. The code-name
6x86L is dual voltage mode rocessor, you
should set JP6 to 2-3.
INTERNAL CPU CLOCK JP7 JP8 JP3 JP4 Ext.x Frq.
PR75ABR 75MHz
close close 1-2 1-2 50x1.5
PR90ABQ 90MHz
o en close 1-2 1-2 60x1.5
PR100ABQ 100MHz
close o en 1-2 1-2 66x1.5
PR120ABQ 90MHz
o en close 1-2 1-2 60x1.5
PR133ABQ 100MHz
close o en 1-2 1-2 66x1.5
PR166ABQ
close o en 2-3 2-3 66x2.5
2-2-2 CPU VOLTA E SETTIN
JP9 is used to various CPU core voltage ty es.
CPU CORE VOLTAGE
JP9
INTELSTD3-4
(P54C)VRE1-2
AMD-K5Ô
PR100
AMD-K5-PR133ABQ
100MHz
1
3
5
7
9
P54C VRE
Cyrix 6x86
AMD K5
P54C STD
P55C2.8V7-8
Cyrix6x86(028)1-2
Cyrix6x86L7-8
AMDK51-2
2-2-3 CPU CLOCK SETTIN
The following setting is for CPU s eed released later than 2-1-1.
EXTERNAL CPU CLOCK JP7 JP8
50(MHz) close close
55(MHz) o en o en
60(MHz) o en close
66(MHz) close o en
External
CPU Clock :
INTERNAL CPU CLOCK JP3 JP4
INTEL EXTERNAL CLOCK X 1.5 1-2 1-2
INTEL EXTERNAL CLOCK X 2.0 2-3 1-2
INTEL EXTERNAL CLOCK X 2.5 2-3 2-3
INTEL EXTERNAL CLOCK X 3.0 1-2 2-3
Internal
CPU Clock :
2-3 SYSTEM MEMORY INSTALLATION
ATC-2000 rovides four 72- in SIM sockets for system memory
ex ansion from 4MB to 256MB. These four SIMs are arranged to two
banks, Bank0 (SIM 1, 2) and Bank1(SIM 3, 4), lease refer to age A. Each
bank rovides 64-bit wide data ath.
JP7 JP8 JP7 JP8 JP7 JP8 JP7 JP8
50MHz 55Mhz 60MHz 66MHz
JP3 JP4 JP3 JP4 JP3 JP4 JP3 JP4
x1.5 x2.0 x2.5 x3.0
P55C
Cyrix 6x86L
The mainboard acce ts Fast Page Mode DRAM, and EDO Mode
(Extended Data Out) DRAM, with a s eed at least 70 nanosecond. You
should lug DRAM modules into two sockets (same bank) or four sockets
at one time. Each air of modules must be the same size, ty e, and
s eed; no matter single-side or double-side module. Please lug in Bank
0 firstly if you only have 2 modules. The mainboard su orts mixing of
EDO DRAM SIMMs with fast age
mode DRAM SIMMs among different banks; lease lug EDO in Bank 0, if
you only have 2 EDO modules.
If you install more than 64MB DRAM on ATC-2000, and would like to get
more than 64MB cacheable size function, you should lug one 16K8 (or
32K8) TAG RAM into U16A socket, and change BIOS value of ‘L2 Cache
Cacheable Size’ to ‘512MB’. ( refer to the screen of “CMOS SETUP
UTILITY”.; age 32)
¡ System Memory Combinations Options ¡
BANK0 BANK1 Total Memory
SIM 1, 2 SIM 3, 4 SIM 1- 4
2MBx2 - 4MB
- 2MBx2 4MB
4MBx2 - 8MB
- 4MBx2 8MB
8MBx2 - 16MB
- 8MBx2 16MB
4MBx2 4MBx2 16MB
4MBx2 8MBx2 24MB
- continue -
8MBx2 4MBx2 24MB
16MBx2 - 32MB
- 16MBx2 32MB
8MBx2 8MBx2 32MB
4MBx2 16MBx2 40MB
16MBx2 4MBx2 40MB
8MBx2 16MBx2 48MB
16MBx2 8MBx2 48MB
32MBx2 - 64MB
- 32MBx2 64MB
16MBx2 16MBx2 64MB
4MBx2 32MBx2 72MB
32MBx2 4MBx2 72MB
8MBx2 32MBx2 80MB
Indice
Altri manuali A-Trend Scheda madre
A-Trend
A-Trend ATC-6120 Manuale utente
A-Trend
A-Trend ATC-6130E Manuale utente
A-Trend
A-Trend 6253M Manuale utente
A-Trend
A-Trend atc-1020 Manuale utente
A-Trend
A-Trend ATC5200M Manuale utente
A-Trend
A-Trend ATC-5030 Manuale utente
A-Trend
A-Trend 6220M Manuale utente
A-Trend
A-Trend ATC-6320 Manuale utente
A-Trend
A-Trend Atc-6240m Istruzioni per il montaggio
A-Trend
A-Trend 6240V Manuale utente
Manuali Scheda madre popolari di altre marche
Telit Wireless Solutions
Telit Wireless Solutions SL869-3DR Manuale utente
Gigabyte
Gigabyte GA-9IVDT Manuale utente
Texas Instruments
Texas Instruments ADS8372EVM Manuale utente
Commell
Commell MS-C73 Manuale utente
IBT Technologies
IBT Technologies MB860 Manuale utente
Nvidia
Nvidia TEGRA DG-04927-001_V01 Manuale utente
