Aaeon ITP11 Manuale utente
Industrial Motherboard
EMB-KB1
ii
E8620
First Edition
October 2013
Copyright Notice
This document is copyrighted, 2013. All rights are reserved. The original
manufacturer reserves the right to make improvements to the products described
in this manual at any time without notice.
No part of this manual may be reproduced, copied, translated, or transmitted
in any form or by any means without the prior written permission of the original
manufacturer. Information provided in this manual is intended to be accurate and
reliable. However, the original manufacturer assumes no responsibility for its use,
or for any infringements upon the rights of third parties that may result from its use.
The material in this document is for product information only and is subject to
change without notice. While reasonable efforts have been made in the preparation
of this document to assure its accuracy, the original manufacturer assumes no
liabilities resulting from errors or omissions in this document, or from the use of the
information contained herein.
The original manufacturer reserves the right to make changes in the product
design without notice to its users.
Acknowledgments
All other products’ name or trademarks are properties of their respective owners.
AMI is a trademark of American Megatrends Inc.
Intel®, Core™ are trademarks of Intel® Corporation.
Microsoft Windows®is a registered trademark of Microsoft Corp.
IBM, PC/AT, PS/2, and VGA are trademarks of International Business
Machines Corporation.
The original manufacturer reserves the right to make changes in the product
design without notice to its users.
All other product names or trademarks are properties of their respective owners.
•
•
•
•
iii
Contents
Chapter 1 Product overview
1.1 Package contents......................................................................... 1-1
1.2 Features ........................................................................................ 1-1
1.3 Specications............................................................................... 1-2
Chapter 2 Motherboard information
2.1 Before you proceed ..................................................................... 2-1
2.2 Motherboard layout...................................................................... 2-2
2.3 Screw size..................................................................................... 2-4
2.4 AMD Accelerated Processing Unit ............................................. 2-6
2.5 System memory ........................................................................... 2-6
2.6 Jumpers ........................................................................................ 2-8
2.7 Onboard LEDs ............................................................................ 2-11
2.8 Connectors ................................................................................. 2-12
Chapter 3 BIOS setup
3.1 BIOS setup.................................................................................... 3-1
3.2 Main menu .................................................................................... 3-2
3.3 Advanced menu ........................................................................... 3-3
3.4 Chipset menu ............................................................................... 3-8
3.5 Boot menu .................................................................................... 3-9
3.6 Security menu ............................................................................ 3-10
3.7 Save & Exit menu....................................................................... 3-11
Appendix
Notices.......................................................................................................A-1
iv
1-1
Chapter 1: General information
1.1 Package contents
Check your industrial motherboard package for the following items.
1 x Industrial Motherboard
1 x SATA Cable
1 x I/O Shield
1 x Support CD
If any of the above items is damaged or missing, contact your distributor or
sales representative immediately.
1.2 Features
AMD®1st Generation APU SoC (FT3 BGA package), Quad-core GX-420CA,
Dual-core GX-217GA (optional)
Two DDR3 / DDR3L 1600 / 1333 MHz SO-DIMMs up to 16GB
SATA 6.0 Gb/s x 2, USB3.0 x 2, USB2.0 x 8
PCI-Express x 4, Full-size Mini Card (PCIe + USB + mSATA) + SIM card
(mSATA BOM optional) x 1, Half-size Mini Card (PCIe + USB) x 1
VGA, DVI, 18/24-bit Dual Channel LVDS support
•
•
•
•
•
Chapter 1
Product overview
EMB-KB1
1-2
1.3 Specications
SYSTEM
Form factor
Mini-ITX
CPU
AMD®1st generation APU SoC (FT3 BGA package) Quad core GX-
420CA, Dual-core GX-217GA (optional)
Memory
2 x SO-DIMM (8GB per DIMM), max. 16GB, unbuffered, non-ECC
DDR3 / DD3L 1600 / 1333 MHz
Single channel memory architecture
I/O Chipset
Fintek F81866D-I
Ethernet
2 x Realtek PCIe Gb LAN 8111F
BIOS
64Mbit Flash AMI BIOS ROM
Wake on LAN
Yes (WOL/PXE)
Watchdog Timer
1~255 steps by software program
H/W Status Monitor
Monitors CPU/Chassis temperature
Monitors Vcore/5V/3.3V/12V voltages
Monitors CPU/Chassis fan speed
Smart Fan Control
CPU Fan/Chassis Fan
Power State
S3, S4, S5
Expansion slot
4 x PCI Express
1 x Mini Card (PCIe + USB + mSATA) + SIM card (mSATA optional)
Full-size
1 x Mini Card (PCIe + USB) Half size
Battery
Lithium battery
Power requirement
1 x ATX connector
Board size
6.7 in. x 6.7 in. (17.0 cm x 17.0 cm)
Gross weight
1.1 lb (0.5 Kg)
Operating
temperature
32oF~140oF (0oC~60oC)
Storage temperature
-40oF~185oF (-40oC~85oC)
Operating humidity
0%~90% relative humidity, non-condensing
Power compliance
Compliant with Eup/ErP
Certicate
CE/FCC
(continued on the next page)
1-3
Chapter 1: General information
DISPLAY
Chipset
Quad-core GX-420CA / Dual-core GX-217GA (Integrated)
Resolution
Up to 1920x1200@60Hz for VGA
Up to 1920x1200@60Hz for DVI
Up to 1920x1080@60Hz, Dual Channel 18/24-bit
Output interface
1 x LVDS
1 x VGA
1 x DVI
I/O
Storage
2 x SATA 6.0Gb/s ports
1 x SATA power connector
Serial port
1 x RS-232/422/485 supports 5V/12V/RI option (COM1 on rear I/O)
5 x RS-232 (COM2 on rear I/O, COM3-COM6 for box header)
USB
2 x USB3.0 (2 ports at rear panel)
8 x USB2.0 (2 ports at rear panel, 4 ports at mid-board, 2 ports at
Mini Card interface)
Fan
1 x CPU Fan connector (4-pin)
1 x Chassis Fan connector (4-pin)
RTC
Internal RTC
Keyboard/Mouse
2 x PS/2 Keyboard / mouse port on rear I/O
Audio
Mic-in
Line-out
Internal audio for 2W speakers
Ethernet
2 x RJ-45 ports on rear I/O
Display
1 x VGA port on rear I/O
1 x DVI-D port on rear I/O
Others
1 x 8-bit Programmable Digital I/O
1 x Front panel connector
1 x AT/ATX mode select jumper
EMB-KB1
1-4
2-1
Chapter 2: Motherboard information
Chapter 2
Motherboard information
2.1 Before you proceed
Take note of the following precautions before you install motherboard components
or change any motherboard settings.
CAUTION!
• Unplug the power cord from the wall socket before touching any
component.
• Before handling components, use a grounded wrist strap or touch a safely
grounded object or a metal object, such as the power supply case, to avoid
damaging them due to static electricity.
• Hold components by the edges to avoid touching the ICs on them.
• Whenever you uninstall any component, place it on a grounded antistatic
pad or in the bag that came with the component.
• Before you install or remove any component, ensure that the ATX power
supply is switched off or the power cord is detached from the power
supply. Failure to do so may cause severe damage to the motherboard,
peripherals, or components.
EMB-KB1
2-2
EATX_PWR2
EATX_PWR1
ALC
887
AAFP1
LVDS1
Super
I/O
MINI_CARD1
MINI_CARD2
CLRTC
J4
17.0cm(6.7in)
17.0cm(6.7in)
DDR3_DIMM_A1 (64bit, 204-pin module)
DDR3_DIMM_A2 (64bit, 204-pin module)
KBMS
AUDIO1
LAN1_USB3_89
LAN2_USB23
F_PANEL
J1
J2
J3
MAIN_PWR_LED1
SB_PWR_LED1
BZ1
USB45
USB67
CHA_FAN
SIM1
CPU_FAN
SATA_PWR1
SATA6G_2
SATA6G_1
COM3
COM4
COM5COM6
DIO1
SPI1
64Mb
BIOS
APU
PCIEX4_1
BATTERY
INV1
CHRONTEL
CH7511B
ASM
1442
RTL
8111F
RTL
8111F
DVI_D1
VGA
COM2
COM1
AMP_CON1
51 2 3
3
10
9
8
6
6
7
18 17 1619 11
12
20
4
13
15 14
21
2.2 Motherboard layout
Place this side
towards the rear
of the chassis
NOTE: Place four screws into the holes indicated by circles to secure the
motherboard to the chassis.
CAUTION! Do not overtighten the screws! Doing so can damage the
motherboard.
Indice
Altri manuali Aaeon Scheda madre
Aaeon
Aaeon PFM-540I Manuale utente
Aaeon
Aaeon XTX-U15B Manuale utente
Aaeon
Aaeon EMB-CV1 series Manuale utente
Aaeon
Aaeon GENE-9455 Rev.B Manuale utente
Aaeon
Aaeon GENE-BT04 Manuale utente
Aaeon
Aaeon PCM-6890 Manuale utente
Aaeon
Aaeon PCM-LN05 Rev.B Manuale utente
Aaeon
Aaeon GENE-9310 Manuale utente
Aaeon
Aaeon MIX-KLUW1 Manuale utente
Aaeon
Aaeon PCM-6890 Manuale utente
Aaeon
Aaeon UP Squared 6000 Manuale utente
Aaeon
Aaeon GENE-9655 Manuale utente
Aaeon
Aaeon HSB-835P Manuale utente
Aaeon
Aaeon Gene-6320 Manuale utente
Aaeon
Aaeon PCM-6897/L Manuale utente
Aaeon
Aaeon IMBA-880 Manuale utente
Aaeon
Aaeon SBC-676 Manuale utente
Aaeon
Aaeon SBC-770 Manuale utente
Aaeon
Aaeon GENE-9455 Rev.B Manuale utente
Aaeon
Aaeon PCM-5890 Manuale utente
Manuali Scheda madre popolari di altre marche
Telit Wireless Solutions
Telit Wireless Solutions SL869-3DR Manuale utente
Gigabyte
Gigabyte GA-9IVDT Manuale utente
Texas Instruments
Texas Instruments ADS8372EVM Manuale utente
Commell
Commell MS-C73 Manuale utente
IBT Technologies
IBT Technologies MB860 Manuale utente
Nvidia
Nvidia TEGRA DG-04927-001_V01 Manuale utente
