Aaeon AGP-3125 Manuale utente

Rugged Expandable AGP-3125

Touch Panel PC

AGP-3125

Intel®Core™ i7/i5 Processor

Rugged Touch Panel Computer

With 12.1” TFT LCD &

Mini Card x 1

PCI x 2 or PCIe x 2

AGP-3125 Manual 4th Ed

July 2013

Rugged Expandable AGP-3125

Touch Panel PC

This document is copyrighted, 2013. All rights are reserved. The

original manufacturer reserves the right to make improvements to

the products described in this manual at any time without notice.

No part of this manual may be reproduced, copied, translated, or

transmitted in any form or by any means without the prior written

permission of the original manufacturer. Information provided in this

manual is intended to be accurate and reliable. However, the

original manufacturer assumes no responsibility for its use, nor for

any infringements upon the rights of third parties, which may result

from its use.

The material in this document is for product information only and is

subject to change without notice. While reasonable efforts have

been made in the preparation of this document to assure its

accuracy, AAEON, assumes no liabilities resulting from errors or

omissions in this document, or from the use of the information

contained herein.

AAEON reserves the right to make changes in the product design

without notice to its users.

Rugged Expandable AGP-3125

Touch Panel PC

Acknowledgments

AMI is a trademark of American Megatrends Inc.

IBM, PC/AT, PS/2 and VGA are trademarks of International

Business Machines Corporation.

Intel®and Core™ i7/i5 are trademarks of Intel®Corporation.

Microsoft Windows®is a registered trademark of Microsoft

Corporation.

RTL is a trademark of Realtek Semi-Conductor Co., Ltd.

ESS is a trademark of ESS Technology, Inc.

UMC is a trademark of United Microelectronics Corporation.

SMI is a trademark of Silicon Motion, Inc.

Creative is a trademark of Creative Technology LTD.

All other product names or trademarks are properties of their

respective owners.

Rugged Expandable AGP-3125

Touch Panel PC

iii

Packing List

Before you begin installing your card, please make sure that the

following materials have been shipped:

1 AGP-3125

1 Jumper Cap

2 Easy stand & 4 screws

12 Panel Mount clips & screws

1 HDD plate & 4 anti-vibration rubbers & 4 screws

1 Power Cord (optional)

1 DVD-ROM for manual (in PDF format) and drivers

If any of these items are missing or damaged, you should contact your

distributor or sales representative immediately.

Rugged Expandable AGP-3125

Touch Panel PC

Safety & Warranty

1. Read these safety instructions carefully.

2. Keep this user's manual for later reference.

3. Disconnect this equipment from any AC outlet before cleaning. Do

not use liquid or spray detergents for cleaning. Use a damp cloth.

4. For pluggable equipment, the power outlet must be installed near

the equipment and must be easily accessible.

5. Keep this equipment away from humidity.

6. Put this equipment on a reliable surface during installation.

Dropping it or letting it fall could cause damage.

7. The openings on the enclosure are for air convection. Protect the

equipment from overheating. DO NOT COVER THE OPENINGS.

8. Make sure the voltage of the power source is correct before

connecting the equipment to the power outlet.

9. Position the power cord so that people cannot step on it. Do not

place anything over the power cord.

10. All cautions and warnings on the equipment should be noted.

11. If the equipment is not used for a long time, disconnect it from the

power source to avoid damage by transient over-voltage.

12. Never pour any liquid into an opening. This could cause fire or

electrical shock.

13. Never open the equipment. For safety reasons, only qualified

service personnel should open the equipment.

14. If any of the following situations arises, get the equipment

checked by service personnel:

a. The power cord or plug is damaged.

b. Liquid has penetrated into the equipment.

c. The equipment has been exposed to moisture.

Rugged Expandable AGP-3125

Touch Panel PC

d. The equipment does not work well, or you cannot get it to

work according to the users manual.

e. The equipment has been dropped and damaged.

f. The equipment has obvious signs of breakage.

15. DO NOT LEAVE THIS EQUIPMENT IN AN UNCONTROLLED

ENVIRONMENT WHERE THE STORAGE TEMPERATURE IS

BELOW -20° C (-4°F) OR ABOVE 60° C (140° F). IT MAY

DAMAGE THE EQUIPMENT.

16. External equipment intended for connection to signal input/output

or other connectors, shall comply with relevant UL / IEC standard

(e.g. UL 60950 for IT equipment and UL 2601-1 / IEC 60601

series for medical electrical equipment). In addition, all such

combinations – systems – shall comply with the standard IEC

60601-1-1, Safety requirements for medical electrical systems.

Equipment not complying with UL 2601-1 shall be kept outside

the patient environment, as defined in the standard.

FCC

This device complies with Part 15 FCC

Rules. Operation is subject to the following

two conditions: (1) this device may not

cause harmful interference, and (2) this

device must accept any interference

received including interference that may

cause undesired operation.

Rugged Expandable AGP-3125

Touch Panel PC

Below Table for China RoHS Requirements

产品中有毒有害物质或元素名称及含量

AAEON Panel PC/ Workstation

有毒有害物质或元素

部件名称铅

(Pb)

汞

(Hg)

镉

(Cd)

六价铬

(Cr(VI))

多溴联苯

(PBB)

多溴二苯醚

(PBDE)

印刷电路板

及其电子组件 ×○○○○○

外部信号

连接器及线材 ×○○○○○

外壳 ×○○○○○

中央处理器

与内存 ×○○○○○

硬盘 ×○○○○○

液晶模块 ×○○○○○

光驱 ×○○○○○

触控模块 ×○○○○○

电源 ×○○○○○

O：表示该有毒有害物质在该部件所有均质材料中的含量均在

SJ/T 11363-2006 标准规定的限量要求以下。

X：表示该有毒有害物质至少在该部件的某一均质材料中的含量超出

SJ/T 11363-2006 标准规定的限量要求。

备注：

一、此产品所标示之环保使用期限，系指在一般正常使用状况下。

二、上述部件物质中央处理器、内存、硬盘、光驱、触控模块为选购品。

Rugged Expandable AGP-3125

Touch Panel PC

vii

Contents

Chapter 1 General Information

1.1 Introduction................................................................1-2

1.2 Feature......................................................................1-3

1.3 Specification..............................................................1-4

1.4 Dimension .................................................................1-7

Chapter 2 Hardware Installation

2.1 Safety Precautions....................................................2-2

2.2 Location of Connectors and Jumpers of the Main

Board...............................................................................2-3

2.3 List of Jumpers..........................................................2-5

2.4 List of Connectors .....................................................2-5

2.5 Setting Jumpers ........................................................2-7

2.6 CMOS Setting (CMOS1)...........................................2-8

2.7 Auto PWRBTN Selection (JP1).................................2-8

2.8 CFD Voltage 3.3V/5V Selection (JP2) ......................2-8

2.9 ME Setting (JP3).......................................................2-8

2.10 LCD Power and Inverter Power Selection (JP4).....2-8

2.11 COM1 +12V/+5V/RING Selection (JP5) .................2-9

2.12 COM2 +12V/+5V/RING Selection (JP6) .................2-9

2.13 Front Panel Connector (CN2) .................................2-9

2.14 SPI Programming Connector (CN3)........................2-9

2.15 LVDS Inverter (CN4)...............................................2-10

Rugged Expandable

Touch Panel PC AGP-3125

viii

2.16 LVDS Connector (CN5)...........................................2-10

2.17 CD-IN Pin Header (CN6).........................................2-11

2.18 LAN Port LED Connector (CN10) ...........................2-11

2.19 RS-232 Serial Port Connector (COM1, COM3)......2-11

2.20 RS-232/422/485 Serial Port Connector (COM2).....2-12

2.21 Pin Header (USB3, USB4)......................................2-12

2.22 FAN Connector (FAN1, FAN2)................................2-12

2.23 4-pin ATX Power Connector (ATX1).......................2-13

2.24 24-pin ATX Power Connector (ATX2).....................2-13

2.25 SATA Connector (SATA 1~3) .................................2-13

2.26 Digital I/O Pin Header (DIO1)..................................2-13

2.27 SATA Power Connector (PWR1)............................2-14

2.28 Hard Disk Drive Installation.....................................2-15

2.29 Easy Stand Installation............................................2-18

2.30 Panel Mount Kit Installation.....................................2-19

2.31 Waterproof Protection .............................................2-20

Chapter 3 AMI BIOS Setup

3.1 System Test and Initialization. ..................................3-2

3.2 AMI BIOS Setup........................................................3-3

Chapter 4 Driver Installation

4.1 Installation.................................................................4-3

Appendix A RAID & AHCI Settings

A.1 Setting RAID..........................................................A-2

A.2 Setting AHCI........................................................A-12

Rugged Expandable AGP-3125

Touch Panel PC

Chapter 1 General Information 1-1

General

Chapter

Information

Indice

Altri manuali Aaeon Pannello touch

Manuali Pannello touch popolari di altre marche

FlowLine

FlowLine Data loop Manuale utente

ALPEX

ALPEX AEx-8 P Series Manuale utente

Ltech

Ltech E5S Manuale utente

Harman

Harman AMX MODERO S MSD-701-L2 Manuale utente

Acnodes

Acnodes PC 1150 Manuale utente

AIS

AIS IP10IA99 series Manuale utente

IBASE Technology

IBASE Technology ASTUT-152-RE1S Manuale utente

YASKAWA

YASKAWA TP 610C Manuale utente

B&R

B&R Power Panel C Series Manuale utente

Beijer Electronics

Beijer Electronics X2 control Manuale utente

AXIOMTEK

AXIOMTEK GOT321W-521 Manuale utente

TRIDONIC.ATCO

TRIDONIC.ATCO x-touchBOX Manuale utente

Qomo

Qomo QIT1386 Manuale utente

DFI

DFI KS104-CD Manuale utente

AMX

AMX AXP-PPC Guida

Sartorius

Sartorius X3 PR 5410 Manuale utente

AMX

AMX Modero X Series Manuale utente

Advantech

Advantech TPC-30 Series Manuale utente