AAXA Technologies M1 Standard Manuale utente

Table of Contents 1

Warnings 2

Overview 3

Remote Control Functions 4

Packing List 5

General Operation 6

Startup and control 6

Shutdown 6

Positioning / Throw Distance / Focus 6-7

Connecting to Computer (USB – VGA Input) 8

Connecting to A/V Source 8-9

Accessing the onboard memory 9

Using Onboard Media Player 10

Accessing SD Card 10

Accessing Flash Memory 10

Loading les onto ash memory 11

Listening to music / viewing pictures 11

Watching videos / viewing les 12

Settings 13

Trouble Shooting 14

Specications 15-16

Table of Contents

*Do not operate the projector in direct sunlight

or near heat sources such as heaters, res, and

stoves as this may cause a re hazard.

*Do not operate the projector close to sources

of steam or oil such as a humidier as this

may cause electric shock.

*Do not operate the projector near water such as by the sink or bathtub as this may

cause electric shock.

*Do not block or restrict airow from ventilation holes as this may cause the

projector to overheat.

*Do not place inammable materials beside the projector as this may cause a re

hazard.

*Do not drop the projector or allow heavy impacts or shock as this will damage the

projector.

Warnings

Overview

Remote Control Functions

Packing List

Projector Remote Control

A/V Cable USB Cable

Power Cord

Startup and Shutdown – To startup, connect

the power supply or external battery to the

rear power input. Press and hold the power

button for 3 seconds until the welcome

logo appears. To shutdown hold the power

button for 3 seconds until optical engine

turns o.

Positioning – Position the projector at an even

plane and a right angle to the desired image.

If the projector is not at a right angle or on an

even plane the projected image will appear

distorted.

General Operation

Focus Adjustment / Throw Distance – The

focus can be adjusted by turning the wheel

located at the front of the projector. The

projector is capable of the following throw

and focus distances:

General Operation

Diagonal size Diagonal size Vercal size Horizontal size Throw distance

(inch) (mm) (mm) (mm) (mm)

30 762 457 610 1250

40 1016 610 813 1666

50 1270 762 1016 2083

60 1524 914 1219 2499

70 1778 1067 1422 2916

80 2032 1219 1626 3332

90 2286 1372 1829 3749

100 2540 1524 2032 4166

Connecting to a VGA / Computer input source

The projector can accept a 15-pin RGB input

source from a laptop’s external monitor port or

graphics card. This source is connected through

the 15-pin “VGA” port on the back of the

projector.

To connect a VGA cable, plug the VGA cable into

the back of the projector. Then select the “VGA PC” option in the Main Menu. This

will enable the projector to receive VGA signals.

Important: Be sure to setup the computer to enable video signal output. If using

the M1 as an external monitor on Windows based systems, this can be done by

selecting “extend my desktop to this monitor.” Note: Each computer system is

dierent – please check with your owner’s manual for how to properly output video

signals. Some Apple computers may require a DVI to VGA adapter.

Accepted Display Resolutions:

800x600 (native / optimal)

1024x720

1280x800

Connecting an Audio/Video input source - The projector can accept dierent A/V

(Audio/Video) sources through the A/V port. These sources are connected through

a 3.5mm A/V cable.

Max Supported Resolutions:

NTSC: 720x480

PAL: 720x576

General Operation

To connect an A/V cable insert the 3.5mm portion into the A/V port of the projec-

tor. Then click on either the “A/V input” icon in the main menu, or press “source” on

the remote control and select “A/V input”. A blue screen will appear and the

Projector will be ready to accept an A/V signal.

Possible A/V sources: Composite (included), Iphone / Ipod (optional), Zune

(optional), Playstation Portable (optional), and others. Please check

www.aaxatech.com or your AAXA dealer for optional A/V cables.

Accessing the onboard memory

The M1 projector includes 1GB of onboard memory for storage.

To access this memory connect a USB cable to the back of the

projector and a computer. Then select the “USB Data” function

in the main menu.

The computer should auto-detect the connected projector and its onboard

memory as a “ash drive.”Double-click the drive to open the drive contents and

manipulate as a standard USB ash drive.

NOTE: If the computer fails to detect the ash drive, check to make sure the projec-

tor is in USB-Data mode and do a search for new devices. If still unable to nd the

drive, please consult with your operating system’s owner manual regarding

detecting ash drives.

General Operation

Altri manuali per M1 Standard

Indice

Altri manuali AAXA Technologies Proiettore

AAXA Technologies

AAXA Technologies ST200 Manuale utente

AAXA Technologies

AAXA Technologies LED PICO Manuale utente

AAXA Technologies

AAXA Technologies P2jr Pico Manuale utente

AAXA Technologies

AAXA Technologies P400+ Manuale utente

AAXA Technologies

AAXA Technologies P7 Manuale utente

AAXA Technologies

AAXA Technologies 4K1 Manuale utente

AAXA Technologies

AAXA Technologies P4 Manuale utente

AAXA Technologies

AAXA Technologies P4X Manuale utente

AAXA Technologies

AAXA Technologies P1Jr Manuale utente

AAXA Technologies

AAXA Technologies M1 Ultimate X Manuale utente

AAXA Technologies

AAXA Technologies M1 Standard Manuale utente

AAXA Technologies

AAXA Technologies M6 Manuale utente

AAXA Technologies

AAXA Technologies P300 Manuale utente

AAXA Technologies

AAXA Technologies HP-4K1-00 Manuale utente

AAXA Technologies

AAXA Technologies P3X Manuale utente

AAXA Technologies

AAXA Technologies LED PICO Manuale utente

AAXA Technologies

AAXA Technologies P4 Manuale utente

AAXA Technologies

AAXA Technologies SLC450 Manuale utente

AAXA Technologies

AAXA Technologies P2 Jr Pico Manuale utente

AAXA Technologies

AAXA Technologies M7 Manuale utente

AAXA Technologies

AAXA Technologies P300 Manuale utente

AAXA Technologies

AAXA Technologies P1 Manuale utente

AAXA Technologies

AAXA Technologies HD RICO Manuale utente

AAXA Technologies

AAXA Technologies P4X Manuale utente

Manuali Proiettore popolari di altre marche

iEmmet

iEmmet MP-312 Manuale utente

Epson

Epson VS400 Manuale utente

Sony

Sony VPL-HS10 Marketing Specifications & Features Manuale utente

Sony

Sony VPL-HW65ES Manuale di servizio

Toshiba

Toshiba TLP-791U Manuale utente

Philips

Philips LC1341 Guida di riferimento

Panasonic

Panasonic PTL735NTU - LCD PROJECTOR-NETWORK IB Manuale utente

NEC

NEC NP600S EDU Manuale utente

BenQ

BenQ SH753P Manuale utente

Eiki

Eiki EK-623U series Manuale utente

Epson

Epson PowerLite Pro Cinema 6020UB Manuale utente

Epson

Epson PowerLite Home Cinema 705HD Manuale utente

Christie

Christie LHD700 Manuale utente

Navitar

Navitar FX Manuale utente

InFocus

InFocus LitePro 560 Manuale utente

Sony

Sony SRX-R815P Manuale utente

Vivitar

Vivitar DP1500 X Manuale utente

Acer

Acer C20 Series Manuale utente