ABB S500 Guida utente

____________________________________________________________________________________________________________

V2 S500 Hardware 1-1 System Data S500 / Issued: 01.2007

System Data S500, Overview

S500 system data, assortment Page 1-3

Use of the S500 I/O modules 1-4

Diagnosis LEDs 1-5

Mounting and disassembling the Terminal Units and the I/O modules 1-13

Mechanical dimensions S500 1-17

Switch-gear cabinet assembly 1-19

Connection system 1-20

Mechanical encoding 1-24

General wiring recommendations 1-26

Behaviour of the system in case of power supply interruptions and power recovery 1-26

Block diagrams, earthing concept 1-26

____________________________________________________________________________________________________________

V2 S500 Hardware 1-2 System Data S500 / Issued: 01.2007

____________________________________________________________________________________________________________

V2 S500 Hardware 1-3 System Data S500 / Issued: 01.2007

S500 System data

The same system data as for the system AC500 apply to the system S500-FBP. Only additional details

are therefore documented here.

Assortment

Parts of the S500-FBP system are

• the FBP Interface Module DC505-FBP

• digital I/O modules

• analog I/O modules

• Terminal Units for the FBP Interface Module and the I/O modules

• accessories

The FBP Interface Module DC505-FBP serves for the data interchange between a fieldbus and the I/O

modules attached to the FBP Interface Module. The FBP interface module itself also has some digital

inputs and outputs. The fieldbus type is defined by the choice of the FieldBusPlug (see documentation

FieldBusPlug / FBP).

Subjects (overview)

Use of the S500 I/O modules ..................................................................................................................... 1-4

Diagnosis LEDs .......................................................................................................................................... 1-5

Mounting and disassembling the Terminal Units and the I/O modules ................................................... 1-13

Mechanical dimensions S500 ................................................................................................................... 1-17

Switch-gear cabinet assembly ................................................................................................................. 1-19

Connection system .................................................................................................................................. 1-20

Mechanical encoding ............................................................................................................................... 1-24

General wiring recommendations ............................................................................................................ 1-26

Behaviour of the system in case of power supply interruptions and power recovery .............................. 1-26

Block diagrams, earthing concept ............................................................................................................ 1-27

____________________________________________________________________________________________________________

V2 S500 Hardware 1-4 System Data S500 / Issued: 01.2007

Use of the S500 I/O modules

The S500 I/O modules either can be attached directly to an AC500 CPU (central expansion) or be

operated by the FBP Interface Module DC505-FBP (decentralized expansion).

DC532DC532PM581CM577CM572

DIN rail,

earthed

Mounting

plate,

earthed

Figure: S500 I/O modules directly attached to an AC500 CPU (central I/O expansion)

DC532DC532DC505

DIN rail,

earted

Mounting

plate,

earthed

Figure: S500 I/O modules attached to the FBP Interface Module DC505-FBP (decentralized expansion)

____________________________________________________________________________________________________________

V2 S500 Hardware 1-5 System Data S500 / Issued: 01.2007

Diagnosis LEDs

All S500 modules have LEDs for the display of operating statuses and error messages. They indicate:

LED Status Color LED = ON LED = OFF LED flashes

digital input yellow input = ON input = OFF --Input

analog input yellow brightness depends on the value of the

analog signal

digital output yellow output = ON output = OFF --Output

analog output yellow brightness depends on the value of the

analog signal

UP process

voltage 24 V

DC via

terminal

green voltage is present voltage is missing --

PWR supply voltage

24 V DC via

FBP

green voltage is present voltage is missing --

S-ERR Sum Error red serious error, data

exchange is

stopped, depends

on the behaviour of

the master

no error error (e.g. error

on one

channel, data

exchange is not

stopped

FBP FBP

communication

green communication

between FBP and

FBP Interface

Module is running

communication

between FBP and

FBP Interface

Module is broken

during

initialization

I/O-Bus I/O-Bus

communication

green communication

between FBP

Interface Module

and the I/O

modules is running

no communication

between FBP

Interface Module

and the I/O

modules

error on one I/O

expansion

module (e.g.

one output

short-circuited)

CH-ERR1 red

CH-ERR2 red

CH-ERR3 red

CH-ERR4

Channel Error,

error

messages in

groups (digital

or analog

inputs and

outputs

combined into

the groups 1,

2, 3, 4)

red

serious error within

the corresponding

group

no error error on one

channel of the

corresponding

group (e.g. one

output short-

circuited)

CH-ERR

Module Error red error within the I/O

module

-- --

*) All of the LEDs CH-ERR1 to CH-ERR4 (as far as they exist) light up together

____________________________________________________________________________________________________________

V2 S500 Hardware 1-6 System Data S500 / Issued: 01.2007

Display, if the FBP is not plugged

DC505 AX522 DC532 DI524 DX522

FBP not plugged

UP is present at all modules,

initialization is impossible because of missing FBP power supply

Situation:

LEDs:

PWR

FBP

S-ERR

I/O-Bus

CH-ERR1

CH-ERR2

CH-ERR4

CH-ERR1

CH-ERR2

CH-ERR3

CH-ERR4

CH-ERR1

CH-ERR2

CH-ERR3

CH-ERR4

CH-ERR1

CH-ERR2

DC505-FBP AX522 DC532 DI524 DX522

LED OFF

green LED ON

green LED flashes

red LED ON

red LED flashes

Figure: LED displays, if the FBP is not plugged

Display examples during the initialization

Initialization of DC505-FBP without I/O modules attached

UP present, FBP plugged

Situation:

PWR

FBP

S-ERR

I/O-Bus

CH-ERR1

CH-ERR2

DC505-FBP

DC505

LEDs before initialization, UP is present

LEDs during initialization (I/O-Bus + FBP)

LEDs after successful initialization (normal condition)

The module remains uninitialized, if errors occurCase A2

Case A1

Case A3

LEDs: LED OFF

green LED ON

green LED flashes

red LED ON

red LED flashes

Figure: Initialization DC505-FBP without I/O modules attached

____________________________________________________________________________________________________________

V2 S500 Hardware 1-7 System Data S500 / Issued: 01.2007

AX522 DC532 DX522

Initialization with I/O modules present

UP is present at all modules, FBP is plugged

Situation:

PWR

FBP

S-ERR

I/O-Bus

CH-ERR1

CH-ERR2

CH-ERR4

CH-ERR1

CH-ERR2

CH-ERR3

CH-ERR4

CH-ERR1

CH-ERR2

DC505-FBP AX522 DC532 DX522

DC505 DX522

more than 77654321 ...

DI524

CH-ERR1

CH-ERR2

CH-ERR3

CH-ERR4

DI524

CH-ERR1

CH-ERR2

DX522

LEDs before initialization, UP is present, number of I/O modules < 7

LEDs during initialization of the I/O-Bus, number of I/O modules > 7

initialization will not succeed because of too big number of I/O modules, FBP does not

get an address, no communication with the fieldbus master

LEDs during FBP initialization, number of I/O modules max. 7

LEDs after successful initialization (normal condition)

Case B1

Case B2

Case B3

Case B4

I/O modules

LEDs:

LED OFF

green LED ON

green LED flashes

red LED ON

red LED flashes

Figure: Initialization DC505-FBP with I/O modules attached

____________________________________________________________________________________________________________

V2 S500 Hardware 1-8 System Data S500 / Issued: 01.2007

AX522 DX522

Initialization with one I/O module missing

UP is present at all modules, FBP is plugged

Situation:

PWR

FBP

S-ERR

I/O-Bus

CH-ERR1

CH-ERR2

CH-ERR4

CH-ERR1

CH-ERR2

DC505-FBP AX522 DX522

DC505 DI524

CH-ERR1

CH-ERR2

CH-ERR3

CH-ERR4

DI524

LEDs before initialization, UP is present

LEDs during initialization

initialization of e.g. two modules successful, FBP, however, blocks the access by

FBP-Conf_error, the red LED CONF flashes

Case C1

Case C2

LEDs:

LED OFF

green LED ON

green LED flashes

red LED ON

red LED flashes

Figure: Initialization with one I/O module missing

____________________________________________________________________________________________________________

V2 S500 Hardware 1-9 System Data S500 / Issued: 01.2007

AX522 DX522

Initialization, if more I/O modules present than have been configured

UP is present at all modules, FBP is plugged

Situation:

PWR

FBP

S-ERR

I/O-Bus

CH-ERR1

CH-ERR2

CH-ERR4

CH-ERR1

CH-ERR2

DC505-FBP AX522 DX522

DC505 DI524

CH-ERR1

CH-ERR2

CH-ERR3

CH-ERR4

DI524

LEDs before initialization, UP is present

LEDs during initialization

initialization of e.g. five modules (instead of 3) successful, FBP, however, blocks

the access by FBP-Conf_err, the red LED CONF flashes, details see the

CH-ERR1

CH-ERR2

CH-ERR3

CH-ERR4

DC532

FBP user documentation

Case D1

Case D2

LEDs:

LED OFF

green LED ON

green LED flashes

red LED ON

red LED flashes

Figure: Initialization, if more I/O modules present than have been configured

____________________________________________________________________________________________________________

V2 S500 Hardware 1-10 System Data S500 / Issued: 01.2007

Display examples for running operation

AX522 DX522

All modules OK, then UP fails at one module

UP still present at all the other modules, FBP plugged

Situation:

PWR

FBP

S-ERR

I/O-Bus

CH-ERR1

CH-ERR2

CH-ERR4

CH-ERR1

CH-ERR2

DC505-FBP AX522 DX522

DC505 DI524

CH-ERR1

CH-ERR2

CH-ERR3

CH-ERR4

DI524

The module sends an error message to the master,

Case 2: UP is missing at one I/O module (DC532), error message see above

CH-ERR1

CH-ERR2

CH-ERR3

CH-ERR4

DC532

the master has to evaluate the error (STOP or GO)

Case 1: UP is missing at DC505-FBP

All modules OK, then an FBP communication error appears

UP is present at all modules, FBP is plugged

Situation:

After 2 seconds the FBP is initialized again (see cases A2 or B3

All modules OK, then an I/O bus error appears at one I/O module

UP is present at all modules, FBP is plugged

Situation:

An I/O bus error is sent to the fieldbus master, the I/O-Bus turns to the reset status or

gets the replacement values

LEDs:

LED OFF

green LED ON

green LED flashes

red LED ON

red LED flashes

of the initialization processes)

Figure: Appearance of errors in running operation

Indice

Altri manuali ABB Sistema I/O

ABB

ABB FIO-01 Manuale utente

ABB

ABB Remote I/O RIO600 Guida

ABB

ABB AE/S 4.2 Manuale utente

ABB

ABB Symphony Harmony Series Manuale utente

ABB

ABB AC500 Series Manuale utente

ABB

ABB Symphony Harmony Series Manuale utente

ABB

ABB VSN300s Manuale utente

ABB

ABB RIO600 Foglio di istruzioni

ABB

ABB OPT-MF-001 Manuale utente

ABB

ABB SAM600 Series Manuale di installazione e funzionamento

ABB

ABB S800 Manuale utente

ABB

ABB RIO600 Manuale utente

ABB

ABB NEXUS-3 Series Manuale utente

ABB

ABB Symphony Harmony Series Manuale utente

ABB

ABB SAM600 Series Manuale utente

ABB

ABB S900 Manuale utente

ABB

ABB SAM600 Series Manuale utente

ABB

ABB Symphony Harmony Series Manuale utente

ABB

ABB SAM600 Series Manuale di installazione e funzionamento

ABB

ABB FIO-01 Manuale utente

ABB

ABB Symphony Harmony Series Manuale utente

ABB

ABB DC561 Manuale utente

ABB

ABB CL-LSR Series Manuale utente

ABB

ABB Discrete I/O Istruzioni per l’uso

Manuali Sistema I/O popolari di altre marche

WAGO

WAGO 750-344 Manuale utente

Teknim

Teknim TWM-1887 Manuale di istruzioni

Intelligent Appliance

Intelligent Appliance IA-2662-E Manuale utente

BERGHOF

BERGHOF ECC DIO 16/16 Manuale di istruzioni

Advantech

Advantech PCM-27J3AU Manuale di installazione e funzionamento

Festo

Festo CP-E08-M12-CL Manuale utente

Measurement Computing

Measurement Computing PCI-DAS64/M1/16 Manuale utente

Hitachi

Hitachi HX-RIO3 Series Manuale utente

NUUO

NUUO SCB-A08 Manuale utente

M-system

M-system R3Y-RS8 Manuale utente

jablotron

jablotron JB-110N Manuale utente

Omron

Omron SYSMAC C200H Manuale utente

DOLD

DOLD SAFEMASTER M Manuale utente

Omron

Omron SYSMAC C2000H Manuale utente

Helmholz

Helmholz TB20 Manuale utente

ICP DAS USA

ICP DAS USA tM-AD2 Manuale utente

Automationdirect.com

Automationdirect.com DL305 Manuale utente

WAGO

WAGO I/O-SYSTEM 750 Manuale utente