Acaia Cinco Manuale utente

Using Your Cinco

FW 1.0.012

The instructions in this operation manual apply to Acaia Cinco Scale. You have purchased a quality

precision weighing scale that requires handling with care. Make sure to read through this operation

manual prior to using the scale.!

Acaia Cinco Operation Manual

Disclaimer

Calibrate your scale using a calibration weight of the appropriate tolerance (class F1or F2). A scale

can only be as accurate as the standard masses or weights used for calibration. For more details,

please read Calibration Mode section in the operation manual.

CAUTION:

1. Any modiﬁcation made without the consent of the manufacturer will result in the

warranty being voided.

2. Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries

according to the instructions.!

Contents

4 Chapter 1: Scale at a Glance

4 Introduction

4 Speciﬁcation

5 Scale overview

6 Accessories

6 Buttons

7 LED indicators

7 Battery charge

8 Chapter 2: Getting Started

8 Preparation

9 Charging and Setup

10 Chapter 3: Basics

10 Basic operations

10 Modes

10 Mode 1 - Weighing mode

11 Mode 2 - Dual Display Mode

12 Mode 3 - Auto Start Mode

13 Chapter 4: Calibration

13 Calibration mode

14 Chapter 5: Conﬁguration

14 Enter settings

15 Auto Sleep Settings

15 Zero Tracking Setting

15 Key Sound Settings

15 Zero Range Setting

15 Weighing ﬁlter setting

15 Default Weighing Unit [default=g]

15 Power Saving Mode

15 Weighing Mode Setting [ nodE_1 ] [default]

15 Dual Display Mode Setting [ nodE_2 ]

16 Auto Start Mode Setting [ nodE_3 ]

16 Bluetooth ON/OFF [default=ON]

17 Appendix

17 Error codes

Chapter 1: Scale at a glance

Identification

The instructions in this operation manual apply to the Acaia Cinco. You have purchased a quality

precision weighing scale that requires handling with care. Make sure to read through this operation

manual prior to using the scale.

"Acaia Cinco Scale "Micro-USB Cable

"Acaia Cinco Carrying Case "Acaia 5th Anniversary Pin Set

"Acaia Scale Weight 100g

Follow the instructions in Preparation and Installation sections in the manual to get started.

To take advantage of its many features, carefully read through the operation manual containing

step-by-step guides, examples, and other information.

Warning: Incorrect handling of this product could possibly result in personal injury or

physical damage.

Specifications

Aprox. Weight

70g

Capacity

500g / 17.636oz

Measuring Units

g , oz

Weighing Range 1

Maximum capacity

300.00g

10.582oz

Minimum capacity

0.01g

0.0005oz

Division

0.01g

0.0005oz

Weighing Range 2

Maximum capacity

500.00g

17.636oz

Minimum capacity

300.00g

10.582oz

Division

0.02g

0.001oz

Indication Limit

515.00g / 18.166oz

Unit Dimensions

65mm (W) x 65mm (L) x 13mm (H)#

Electrical Requirements

5V/500mA

Power and Battery

Lithium-ion rechargeable 3.7V 310mA

Display

8 digit LED

Top

Aluminum construction with acrylic window,#

touch sensitive buttons#

Bottom

Aluminum construction

Connectivity

Bluetooth 4.0

Chapter 1: Scale at a glance 4

Scale Overview

Accessories

Linearity

+/-2d ( d=0.01g for 0g~300g, d=0.02g for

300g~500g)

Work Time

Up to 7 hours

Starting Weight

Error Range

0.02g

Chapter 1: Scale at a glance 5

Scale Back

Micro-B USB port

Tare Key

Scale Front

Power Key

LED Display

Weighing Pan

Acaia Scale Weight

100g

Micro USB

Charging Cable

Buttons

*Please ﬁnd Chapter 3: Basics for more details.

Chapter 1: Scale at a glance 6

Button

Function

Example

Turn on

Press and hold for 0.5 seconds to turn on the scale.

Turn off

Double-tap the power button to turn off the scale.

Switch mode (Default)

While the scale is turned on, press and hold for 1 second to switch

modes: Weighing Mode / Dual Display Mode / Auto Start Mode.

Start/Stop/Reset Timer

While in Dual Display Mode, tap to start/stop/reset timer

Back

While in Settings, press to go back to Weighing Mode(Default

Setting).

Tare

While in Weighing Mode/ Dual Display Mode / Auto Start Mode,

press to perform tare operation.

Toggle units

Long Press to switch between Gram and Ounce in Weighing Mode.

Switch option

While in Settings, tap to advance through settings options. While in

settings, tap to toggle options in sub menus.

Reset

While in Auto Start Mode, double tap to reset the mode.

Conﬁrm

While in Settings, press and hold for 2 seconds to conﬁrm the

option selected in a sub menu.

Enter calibration modes

While in Weighing Mode, rapidly tap T button to enter Calibration

Mode.

LED Indicators

Battery Charge

You can charge the battery by plugging the USB cable to any power supply listed below:

A computer USB port

A cell phone charger with a micro USB connector, an output of 5 Volts and 1 Amp is

recommended

An automotive cell phone charger with a USB port or a Micro USB cable

A wall-charger with an output of 5 volts and 1 amp is recommended

The scale takes 1-2 hours to fully charge from an empty battery. You can charge the battery

more frequently so that it will never hit empty.

Battery percentage can be viewed via Brewmaster.

It is not recommended to let the battery run out completely before charge.!

Chapter 1: Scale at a glance 7

Chapter 2: Getting Started

Preparation

This scale is intended for indoor use.

The scale will function best when used in a stable, vibration-free, and level environment.

Do not use the scale near magnets or equipment that contains magnets. Avoid using the scale

near equipment that creates strong electrical interference.

Avoid storing or using the scale in places with large temperature changes. Temperatures

above 40C (104F) and below 15C (59F) may result in weighing inaccuracy.

Chapter 2: Getting Started 8

Charging and Setup

Plug the USB cable into the Micro-B USB port on the scale’s back panel for charging.

Note: To avoid affecting the accuracy of the scale, do not use the scale during charging

Long press power button to turn on the scale.

* It is highly recommended to calibrate the scale with the calibration weight before using.

Chapter 2: Getting Started 9

Chapter 3: Basics

Basic Operations

Modes *To Enable/Disable Modes Please see Chapter 5: Configuration.

Mode 1 - Weighing Mode

Mode 2 - Dual Display Mode

Mode 3 - Auto Start Mode

Mode 1 - Weighing Mode

In the Weighing Mode, the scale will only display weight, in either grams or ounces.

Display

1. There are two different weighing units in Weighing Mode: gram and ounce.

2. The readability is 0.01g for grams and 0.0005 oz for ounces.

Action

Operation

Turn On Scale

Press and hold power button

Turn Off Scale

Double Tap Power Button

Switch Mode

Press and hold power button while scale is on

Tare Weight

Tap T button

Toggle Units G/Oz

Long press T button

Action

Operation

Tare Weight

Tap T

Toggle Units G/Oz

Long Press T

Switch Modes

Long Press Power Button

Chapter 3: Basics 10

Indice

Manuali Scala popolari di altre marche

AWS

AWS ZEO-50 Manuale utente

Gima

Gima Glass Body Fat Analyzer Manuale elenco delle parti

Seca

Seca 374 Manuale utente

TEC

TEC TEC SL59 SERIES Manuale utente

Axis

Axis B/E Series Manuale utente

Alecto

Alecto ACW-40 Manuale utente

Rice Lake

Rice Lake MSI-4260 IS Manuale utente

IKA

IKA RCT basic safety control Manuale utente

ADE

ADE M20011 Manuale utente

Duronic

Duronic KS3000 Manuale utente

Digi

Digi SM-720 Manuale utente

Cardinal

Cardinal CS Series Manuale utente

Korona

Korona Kastella Manuale utente

A&D

A&D FC-50Ki Manuale utente

BDA

BDA CAMARGUE Manuale utente

Tanita

Tanita HD-357 Manuale utente

Leifheit

Leifheit 03173 Manuale utente

Lumme

Lumme LU-1340 Manuale utente

acaia Cinco Manuale utente

Manuali Scala popolari di altre marche