acaia PS001 Manuale utente
Acaia Pearl Model S
User Manual
FW 1.0.052
PS001 / PS002
In the Box
Introduction
Scale Overview
Getting Started
Placement
Power On / Off
Tare Weight
Toggle Units
Switch Modes
Using the Acaia Brewguide
Using Brewguide for the First Time
Using Brewguide on Pearl S
Brewguide Action Buttons
Product Care Information
Battery Charging
Battery Indicator
Calibration
Mode Introduction
Mode 1 - Weighing Mode
Mode 2 - Dual Display Mode
Mode 3 - Pour Over Auto Start Mode
Mode 4 - Portalter Mode
Mode 5 - Espresso Mode
Mode 6 - Flowrate Mode
Mode 7 - Flowrate Practice Mode
Conguration
Appendix
Buttons
LED Indicators
Error Codes
Other
Specications
3
3
3
4
4
4
4
4
4
5
5
5
6
7
7
7
7
8
8
8
9
10
11
12
12
13
17
17
18
18
18
19
Contents
Next, follow the instructions in the “Getting Started” chapter in this manual to start using
your scale. To take full advantage of the many features of the Pearl Model S, carefully read
through this user manual for step-by-step procedures, examples, and other information.
Warning: Incorrect handling of this product could result in personal injury or physical damage.
Thank you for choosing one of our scales. The Acaia Pearl Model S is designed and
manufactured to the most rigorous standard to give you the best coffee brewing experience.
First, check the shipping carton to nd the following:
*Note: For the best performance, place the weight in the center of the weighing pan.
In the Box
Introduction
Scale Overview
Weighing Pan
LED Display
Power Tare
Acaia Pearl Model S
Coffee Scale
Heat Resistant Coaster Micro USB Charging Cable
3
Getting Started
Placement
Power On / Off
Tare Weight
Toggle Units
Switch Modes
Select a work surface that is stable, vibration-free and level to
place the scale.
4
[Press] to turn on the scale.
[Double tap] to turn off the scale.
[Press] to tare/zero the weight.
[Press and hold] for one second to switch modes.
* Please see the “Mode Introduction” section for more details.
[Press and hold] for ve seconds to toggle units.
Brewguide is a step-by-step interactive guide to brewing coffee. Simply scan the Acaia
Brewguide QR code on the coffee bean bag, and use the Acaia Brewguide app to download
the recipe to your Pearl S. In the Brewguide app, you can also discover guides created by
roasters around the world.
Download the
Brewguide app
Search or scan the QR
Code to nd the brewguide
you need.
Wait until the brewguide
is sent to the Pearl S; this
may take up to one minute.
Activate the Bluetooth on
your phone and connect
with the Pearl S
Select a brewguide.
Follow the guide and get
brewing!
Follow the instructions on
the Brewguide app
Choose “Upload to Pearl
S” in the app to send it to
Pearl S.
Using the Acaia Brewguide
Download
1
4
Connect
2
5
Start personalization
3
Using Brewguide for the First Time
Using Brewguide on Pearl S
5
Brewguide Action Buttons
Enter Brewguide mode
Go to the next brewing step
Replay the current brewing step
In any scale mode, [press and hold] for one second
In Brewguide mode, [press and hold] for one second
In Brewguide mode, [press] to replay
6
Go back to the previous brewing step
Tare
In Brewguide mode, [press and hold] for one second
In Brewguide mode, [press] to tare
• You can charge the battery by plugging the USB cable into
any of the power supplies listed below:
• A computer
• A USB wall-charger with an output of 5 volts and 1 amp
• A DC car-charger with an output of 5 volts and 1 amp
• It takes about 3-4 hours to fully charge the battery from
empty. Try not to let the battery completely run out before
charging. Charge the battery as needed.
• A fully charged battery can provide up to 16 hours of
working time in normal brightness and up to 40 hours in low
brightness mode.
• To check remaining battery level, see “Battery Level
Indicator” section.
* Note: Using a “fast-charging” charging block or charging hub (a charging block/hub delivering
over 5v at 1A) could damage your Acaia scale’s circuit board.
Turn on the Acaia
scale.
Make sure the scale
is in weighing mode
and the unit is set to
‘gram’, then tap the
‘T’ button rapidly.
Keep tapping the ‘T’
button until ‘CAL’ is
shown on the
display.
Place a weight
(100 g/500 g/1000 g)
on the scale and wait
until the display
shows ‘_End_’.
Calibration is now
complete!
Product Care Information
Turn on scale Tap Tare button See CAL display Place a weight
Battery Charging
Calibration
7
Battery Indicator
• When the scale is off, the remaining battery level can be viewed by pressing and holding
the power button until the battery level indicator is displayed.
• You can also check the battery level by connecting the scale to Acaia Apps.
In the Weighing Mode, the scale will only display
weight, in either grams or ounces.
In the Dual Display Mode, the scale displays [ 0:00 0.0 ]
with a timer (left) and weight (right).
• There are two different weighing units in Weighing Mode: gram and ounce. A green
dot will appear in the upper right of the LED display and the scale will read 0.000 when
weighing in ounces.
• The LED display shows [ 0.0 ] when the scale is measuring in grams.
• The LED display shows [ 0.000 ] when the scale is measuring in ounces.
• The readability is 0.1 g for grams and 0.005 oz for ounces.
• There are two different weighing units in Dual Display Mode: gram and ounce.
• The LED display shows [0:00 0.0] when the scale is measuring in grams.
• The LED display shows [0:00 0.000] when the scale is measuring in ounces.
• When the weight exceeds 999 grams, the LED display only shows the integer part
(the decimal point will not be displayed). The LED display shows up to a maximum of
3000 grams. If the weight exceeds 3000 grams, the scale will display [ Maximum ].
Mode Introduction
Mode 1 - Weighing Mode
Mode 2 - Dual Display Mode
Action Operation
Tare Weight Tap Tare button
Toggle Units g/oz Press and hold Tare button for ve seconds
Reset Mode Double tap Tare button
Switch Mode Long press Power button
Action Operation
Start/Stop/Reset Timer Tap Power button
Tare Weight Tap Tare button
Reset Mode Double tap Tare button
Toggle Units g/oz Press and hold Tare button for ve seconds
Switch Mode Press and hold Power button
8
• The LED display ashes [ 0.0 ] and [ 0:00 0.0 ] when measuring in grams and the
timer is idle.
• The LED display ashes [ 0.000 ] and [ 0:00 0.000] when measuring in ounces and the
timer is idle.
• Once the timer has started, the LED display shows [ 0:00 0.0 ], with the time elapsed on
the left and the weight on the right in grams.
• Once the timer has started, the LED display shows [ 0:00 0.000], with the time elapsed on
the left and the weight on the right in ounces.
• When the weight exceeds 999 grams, the LED display only shows the integer part (the
decimal point will not be displayed). The LED display shows up to a maximum of 3000 grams.
If the weight exceeds 3000 grams, the scale will display [ Maximum ].
• If the timer has not started yet, the display will ash 0:00 and a water droplet.
• The timer will start automatically when the rst ow of water is detected.
• The timer stops when the brewing equipment is removed. The scale will ash between
the beverage weight and the tare weight of the items on the scale.
Mode 3 - Pour Over Auto Start Mode
Mode Description
Display
Action Operation
Start/Stop/Reset Timer Tap Power button
Tare Weight Tap Tare button
Reset Mode Double tap Tare button
Toggle Units g/oz Long press Tare button for ve seconds
Switch Mode Press and hold Power button
The Pour Over Auto Start Mode is designed to aid
pour over coffee brewing. The scale will detect
the start of the ow from kettle into the vessel and
automatically start the timer function; the timer stops
when the brewing equipment has been removed
from the scale. When the vessel is removed from the scale, the display ashes the nal
beverage weight.
9
Note
1. If the scale is left idle for 15 seconds or you double tap the Tare button, the Pearl Model S
will automatically reset the mode to default for the next auto-tare operation.
2. To change the timer reset length in Portalter Mode, see the “Conguration” section.
Mode 4 - Portalter Mode
Action Operation
Tare Weight Tare function begins automatically when a stable weight
is placed on the scale
Reset Mode Double tap Tare button
Toggle Units g/oz Long press Tare button for ve seconds
Switch Mode Press and hold Power button
• When measuring in grams, the display shows [ 0.0 ] before a portalter is placed
on the scale.
• When measuring in ounces, the display shows [ 0.000 ] before a portalter is placed
on the scale.
• The display shows [ 0.0 ] after a portalter has been registered.
• Place an empty portalter on the scale, and the scale will register the weight of the
portalter.
• Remove the portalter after [ ] disappears.
Display
Mode Description
The Portalter Mode is designed to simplify the workow
of weighing coffee grounds in a portalter. The scale
automatically detects a portalter or other vessel and
tares the weight of the vessel. Remove the portalter to
add coffee grounds, then place on the scale again to
measure the weight of the coffee grounds. Repeat as needed to adjust the weight. After
the portalter has been removed for 15 seconds, the scale will reset the mode to default
for the next workow.
10
Questo manuale è adatto per i seguenti modelli
2
Indice
Altri manuali acaia Scala
acaia
acaia Pearl S Manuale utente
acaia
acaia pearl coffee scale Manuale utente
acaia
acaia Pearl Manuale utente
acaia
acaia Pearl S Manuale utente
acaia
acaia AL010 Manuale utente
acaia
acaia lunar Manuale utente
acaia
acaia Pearl Manuale utente
acaia
acaia Pearl Manuale utente
acaia
acaia Pyxis Manuale utente
acaia
acaia lunar Manuale utente
acaia
acaia Pearl Manuale utente
acaia
acaia Coffee Scale Manuale utente
acaia
acaia Pearl Manuale utente
acaia
acaia Pearl Scheda tecnica
acaia
acaia AP009 Manuale utente
acaia
acaia Pearl Scheda tecnica
acaia
acaia lunar Manuale utente
acaia
acaia Pearl S Manuale utente
acaia
acaia Pearl Manuale utente
acaia
acaia Pearl Manuale utente
