AcquaSaver ACT20 Manuale
2Model ACT20 Last updated: 26-09-2020
Introduction
The AcquaSaver Valve is a fully automatic mechanical rainwater/mains changeover
device designed for submersible pressure pump system for harvesting rainwater for
the toilet, laundry and household applications with automatic mains water backup.
Features
Patent design
Easy to install
Watermark Approved
2 year warranty
Does not require regular maintenance
No electrical consumption
No electrical components
Solid brass construction
Fully waterproof - Built to last
Built-in certified dual check valve for
backflow prevention
Watermark Approved right angle ball valves
Specifications
Max Mains Pressure 500 KPa recommended
Max Pump Pressure 600 KPa
Min Pump Pressure 300 KPa Recommended
Max Flow Rate 50 LPM
Max water temperature 40° C
Min Water Temperature 0° C*
Pump Inlet 25mm 1” BSP F
Mains Water Inlet 20mm 3/4” BSP
Outlet 20mm 3/4” BSP
Weight 2.5 Kg
*Ensure proper protection against freezing weather
Operation
The AcquaSaver valve will always prioritize the use
of rainwater over mains water when rainwater is
available and will automatically switch to mains
water in the event of the rainwater tank running low
or in an electrical failure.
When rainwater has been replenished, or power
has been restored to the pump, the AcquaSaver
valve will always automatically prioritize back to
rainwater.
The pump is only active when rainwater is being
drawn from the rainwater tank; it does not operate
when the AcquaSaver valve has switched to mains
water position.
The pump’s controller will start and stop the pump
when it detects a demand, for example; flushing a
toilet.
The operating mechanism of the AcquaSaver valve
is a unique patent design and works by hydraulic
water pressure created by the pump to close the
mains water inlet, which ensures an extremely
reliable mechanism using few moving parts and no
electronic components..
Maintenance
The AcquaSaver valve does not require
maintenance; however, there are things you can do
to ensure its most reliable operation:
– Cleaning your gutters
– Cleaning the inlet strainer on the rainwater tank
Installation &
Operating Instructions
3Model ACT20 Last updated: 26-09-2020
Connection
Attach hose barb with rubber washer.
(Hose barb not supplied)
Attach hose to pump and
Acquasaver valve.
Screw down Acquasaver
tank cover base on to tank.
(Screws not supplied)
Slot for electrial cord
Ensure all joints are locked up correctly.
Fit Acquasaver tank cover on to base and
use the 3 screws supplied.
Main water in
To House
Cut hole 290mm
STEP
1
STEP
4
STEP
5
STEP
2
STEP
3
Proudly manufactured by
4 Squires Way, Croydon South
Victoria 3136 Australia
+61 3 9878 1575
+61 3 9894 2820 acquasaver.com.au
Parts List
Item No. QTY Part Name
1 1 Acquasaver Tank Cover - Top
2 1 Acquasaver Tank Cover - Base
3 1 Acquasaver Valve
4 2 Right Angle Ball Valve (Watermark Approved)
5 1 Rubber Washer
6 3 Plastite Screws
Trouble Shooting
Symptom Cause Remedy
No water is delivered
from the pump, or pump
performance is decreased.
Rainwater tank is empty.
No Power.
Isolation valve is closed.
Wait for tank to fill.
Check power supply & plug.
Open Isolation valve.
See pump manual.
No water is delivered from
mains.
No water from mains.
Debris in the valve.
Check isolation valve
Contact dealer.
Pump continually runs. Leak in the plumbing system.
e.g. toilet or tap is leaking.
Faulty pump
Contact plumber
Contact pump manufacturer.
AcquaSaver warranty for Australia and New Zealand
The AcquaSaver Valve is guaranteed for a period of 2 years from the date of original purchase to be free of
material or manufacturing defects. Should any part fail as a result of such defects within this period, the
AcquaSaver valve will be repaired or replaced free of charge. The AcquaSaver also has a LIMITED LIFETIME
WARRANTY on all brass components. Any brass component will be replaced free of charge if it fails in normal
use during its life. The warranty applies in all states and territories in Australia and New Zealand. The warranty
period commences on the day of the original purchase of the AcquaSaver valve. Evidence of this purchase
must be provided when claiming repairs or replacement; it is recommended you retain all receipts.
Both warranties are subject to conditions by the original purchaser with all conditions set in the installation
and operating instructions. Failure to comply with these instructions, damage or breakdown caused by fair
wear or tear, negligence, misuse, incorrect installation, chemical or additive in the water, corrosive or abrasive
water, inadequate conditions, attempting repairs or accidents are not covered by this warranty.
2
3
5
6
4
1
Altri manuali AcquaSaver Unità di controllo
Manuali Unità di controllo popolari di altre marche
Festo
Festo Compact Performance CP-FB6-E Manuale elenco delle parti
Elo TouchSystems
Elo TouchSystems DMS-SA19P-EXTME Manuale utente
JS Automation
JS Automation MPC3034A Manuale utente
JAUDT
JAUDT SW GII 6406 Series Guida rapida
Spektrum
Spektrum Air Module System Manuale utente
BOC Edwards
BOC Edwards Q Series Manuale utente
