ADA INSTRUMENTS Phantom 2D Manuale utente
Operating manual
Line laser level
ADA PHANTOM 2D
PHANTOM 2D
Table of contents
1. Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
2. Application . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
3. Specications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
4. Change of batteries. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
5. Laser lines. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
6. Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
7. Keypad . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
8. Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
8.1. Application demonstration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
9. To check the accuracy of line laser level . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
9.1. To check the accuracy of line laser level (slope of plane) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
9.2. To check level . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
9.3.To check plumb . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
10. Care and cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
11. Specic reasons for erroneous measuring results . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
12. Electromagnetic acceptability . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
13. Laser classication . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
14. Safety instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
15. Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
16. Exceptions from responsibility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
17. Appendix 1- “Certicate of acceptance and sale”
18. Appendix 2- “Warranty card”
3
MEASUREMENT FOUNDATION
PHANTOM 2D
Kit
ADA PHANTOM 2D: cross line laser, batteries, wall/oor mount, target, bag for transportation, operating manual.
ADA PHANTOM 2D Set: cross line laser, batteries, wall/oor mount, tripod, operating manual.
Application
Cross Line Laser projects visible laser planes. It is used for determination height, making horizontal and vertical planes.
Specications
Leveling Range: self-leveling, ±3°
Accuracy: ±2mm/10m
Working Range: up to 40 m without receiver
70m with receiver
Power Supply: 3AA Batteries Alkaline
Laser Source: 2 x 635nm
Operating temperature: -10°C to 45°C
Laser class: 2
Dimensions: 10x12x8 cm
Weight: 370 g
* depends on illumination of work area
4
MEASUREMENT FOUNDATION
PHANTOM 2D
Change of batteries
Open battery compartment. Put in 3 x AA Alkaline batteries. Take care to correct polarity. Close battery compartment.
ATTENTION: If you are not going to use instrument for a long time, take out batteries.
Laser lines
5
MEASUREMENT FOUNDATION
PHANTOM 2D
1
2
3
4
5
Features
laser emitting window
keypad
battery cover
compensator switch
tripod mount 1/4"
1.
2.
3.
4.
5.
6
MEASUREMENT FOUNDATION
PHANTOM 2D
Keypad
key to switch lasers
receiver switch
TILT LED
receiver LED
1.
2.
3.
4.
1
34
2
7
MEASUREMENT FOUNDATION
PHANTOM 2D
Operation
Place the instrument on the working surface or mount it on the tripod/pillar or wall mount (comes with the instrument).
Switch on the instrument: turn the compensator switch (4) to the position “ON”.
Press on the power key (1) as following:
1. One pressure - vertical beam
2. Two pressures - horizontal plane
3. Three pressures - both horizontal and vertical planes.
To work with detector, press button (2). This mode allows you to work in bright illumination and at long distance.
8
MEASUREMENT FOUNDATION
PHANTOM 2D
For more information you can visit our website
www.adainstruments.com
APPLICATION DEMONSTRATION
9
MEASUREMENT FOUNDATION
PHANTOM 2D
To check the accuracy of line laser level
To check the accuracy of line laser level (slope of plane)
Set up the instrument between two walls, the distance is 5 m.Turn on the Cross Line Laser and mark the point of cross laser line on
the wall.
Set up the instrument 0,5-0,7m away from the wall and make, as described above, the same masrks. If the difference {a1-b2} and
{b1-b2} is less then the value of “accuracy” (see spesications), there is no need in calibration.
Example: when you check the accuracy of Cross Line Laser the difference is {a1-a2}=5 mm and {b1-b2}=7 mm. The
instrument’s error: {b1-b2}-{a1-a2}=7-5=2 mm. Now you can compare this error with standard error.
If the accuracy of Cross Line Laser isn’t corresponding with claimed accuracy, contact the authorized service center.
10
MEASUREMENT FOUNDATION
PHANTOM 2D
For more information you can visit our website WWW.
ADAINSTRUMENTS.COM
To check level
Choose a wall and set laser 5M away from the wall. Turn on the laser and cross laser line is marked A on the wall.Find another point
M on the horizontal line, the distance is around 2.5m. Swivel the laser, and another cross point of cross laser line is marked B. Please
note the distance of B to A should be 5m.
Measure the distance between M to cross laser lune, if the difference is over 3mm, the laser is out of calibration, please contact with
seller to calibrate the laser.
m
m
Indice
Lingue:
Altri manuali ADA INSTRUMENTS Livello laser
ADA INSTRUMENTS
ADA INSTRUMENTS CUBE 3D Manuale utente
ADA INSTRUMENTS
ADA INSTRUMENTS ProDigit 30 Manuale utente
ADA INSTRUMENTS
ADA INSTRUMENTS CUBE 3-360 GREEN Manuale utente
ADA INSTRUMENTS
ADA INSTRUMENTS ULTRALiner 360 2V Manuale utente
ADA INSTRUMENTS
ADA INSTRUMENTS CUBE 2-360 GREEN Manuale utente
ADA INSTRUMENTS
ADA INSTRUMENTS ProDigit 30 Manuale utente
ADA INSTRUMENTS
ADA INSTRUMENTS BASIS Manuale utente
ADA INSTRUMENTS
ADA INSTRUMENTS ProDigit Mini Manuale utente
ADA INSTRUMENTS
ADA INSTRUMENTS 6D SERVOLINER Manuale utente
ADA INSTRUMENTS
ADA INSTRUMENTS TOPLINER 3-360 Manuale utente
ADA INSTRUMENTS
ADA INSTRUMENTS CUBE MINI Manuale utente
ADA INSTRUMENTS
ADA INSTRUMENTS 6D MAXLINER Manuale utente
ADA INSTRUMENTS
ADA INSTRUMENTS ROTARY 400 HV-G SERVO Manuale utente
ADA INSTRUMENTS
ADA INSTRUMENTS CUBE MINI Manuale utente
ADA INSTRUMENTS
ADA INSTRUMENTS 6D SERVOLINER Manuale utente
ADA INSTRUMENTS
ADA INSTRUMENTS ROTARY 500 HV SERVO Manuale utente
ADA INSTRUMENTS
ADA INSTRUMENTS LASERTANK 3-360 GREEN Manuale utente
ADA INSTRUMENTS
ADA INSTRUMENTS 2D Basic Level Manuale utente
ADA INSTRUMENTS
ADA INSTRUMENTS CUBE MINI Manuale utente
ADA INSTRUMENTS
ADA INSTRUMENTS ARMO 2D Manuale utente
