Adamson CS Series Manuale utente

USER MANUAL

Distribution Date: November 1st, 2020

S E R I E S

User Manual

S E R I E S

Version 1.0

Distribution Date: November 1st, 2020

This manual must be accessible to the person operating this product. As such, the product owner must store it in a safe place

and make it available upon request to any operator.

Resale of this product must include a copy of this manual.

If this manual becomes damaged or additional copies are needed, please email [email protected].

CS10n User Manual

Directive 2014/35/EU: Low Voltage Directive

973-0013 CS10n

910-0008 CS10n Amplier Upgrade

905-0039 CS Network Distribution System

912-0003 CS Gateway

913-0005 CS Bridge

914-0002 CS Power Distribution System 110 V

914-0003 CS Power Distribution System 230 V

Directive 2006/42/EC: Machinery Directive

930-0020 Sub-Compact Support Frame

930-0021 Extended Beam

930-0033 Moving Point Extended Beam

932-0047 Line Array H-Clamp

932-0043 Extended Lifting Plates

Directive 2014/30/EU: Electromagnetic

Compatibility Directive

973-0013 CS10n

910-0008 CS10n Amplier Upgrade

905-0039 CS Network Distribution System

912-0003 CS Gateway

913-0005 CS Bridge

914-0002 CS Power Distribution System 110 V

914-0003 CS Power Distribution System 230 V

EU Declaration of Conformity

Adamson Systems Engineering declares that the

products stated below are in conformance with the

relevant fundamental health and safety criteria of the

applicable EC Directive(s), in particular:

Signed at Port Perry, ON. CA - November 1st, 2020

------------------------------------------------

Brock Adamson (President & CEO)

ADAMSON SYSTEMS ENGINEERING, Inc.

1401 Scugog Line 6, Port Perry

Ontario, Canada L9L 1B2

T: +1 905 982 0520, F: +1 905 982 0609

Email: [email protected]

Website: www.adamsonsystems.com

User Manual

S E R I E S

Contents

Symbols

Safety & Warnings

Status LED

Product Overview

Power

Connectivity

Rack Mounted Systems

Control Suite

Technical Specications

Symbols

This symbol alerts the user that there are important operating and maintenance instructions in the

literature accompanying this appliance

This symbol alerts the user to the presence of voltages that can cause dangerous electric shock

This symbol alerts the user to the weight of the appliance that can cause muscle strain or back injury

This symbol alerts the user that the appliance can be hot to the touch and should not be touched

without taking care and instruction

User Manual

S E R I E S

Safety & Warnings

Read these instructions and keep them available for future reference.

This manual can be downloaded from

https://adamsonsystems.com/en/support/downloads-directory/cs-series/CS10n.

Heed all warnings and follow all instructions.

Clean this product with a dry cloth only.

Never restrict the ventilation ports.

Protect the cabling from being walked on or pinched.

A qualied technician must be present during the installation and use of this product. This product is capable

of producing extremely high sound pressure levels and should be used according to the specied local sound

level regulations and good judgement. Adamson Systems Engineering will not be liable for damages caused by

any possible misuse of this product.

Inspect the product before each use. If any sign of defect or damage is detected, immediately withdraw the

product from use for maintenance.

Servicing is required when the loudspeaker has been dropped or damaged in any way or does not operate

normally. All service requirements must only be undertaken by a trained service technician.

View the CS-Series Rigging Tutorial video and/or read the CS-Series Line Array Rigging Manual before

suspending the CS10n. Rigging information and safety warnings presented in Adamson CS must be strictly

adhered to. Use only with the rigging frames/accessories specied by Adamson, or sold with the loudspeaker

system.

This speaker enclosure is capable of creating a strong magnetic eld. Please use caution around the enclosure

with data storage devices such as hard drives.

This product contains potentially dangerous voltages.

Do not open the unit. There are no user serviceable parts inside this product. Failure to comply voids warranty.

Do not use this product with a power cable that does not have a polarized, grounded plug.

Do not install this product in wet or humid locations.

Unplug this product from the power source during lightning storms.

User Manual

S E R I E S

Safety & Warnings

Avoid lifting this product. For movement and storage, use only the cart or case sold by Adamson for the product,

or one as specied by Adamson. Be sure to use caution while moving the case or cart to avoid injury.

This product can get hot when in use for extended periods of time.

To reduce the risk of overheating the product, avoid exposing it to direct sunlight.

Do not install this product near heat sources such as radiators, heat registers, stoves, or other apparatus that

produce heat.

In an effort to continuously improve its products, Adamson releases

updated software, presets and standards for its products.

Adamson reserves the right to change the specications of its

products and the content of its documents with no prior notice.

THRU2

ANALOG

DATA

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

OUTPUT

INPUT

100-240V 16A

~ 50-60Hz

100-240V 16A

~ 50-60Hz

ADAMSON SYSTEMS ENGINEERING

www.adamsonsystems.com

MADE IN CANADA FABRIQUÉ AU CANADA

Sub-Compact Line Source

S E R I E S

STATUS

Status LED

Colour State

Start-Up Green Flashing

Normal Operation Green Solid

Amplier Off Amber Solid

Amplier Clipping Red Flashing

General Fault Red Solid

User Manual

S E R I E S

The CS10n is a sub-compact, powered, intelligent, line array enclosure designed for extended throw applications. It contains

two symmetrically arrayed 10” LF transducers, and a 4” HF compression driver mounted onto an Adamson waveguide. The

high frequency waveguide is designed to couple multiple cabinets across the entire intended frequency band without loss of

coherence.

Each CS10n houses proprietary Class-D amplication and comprehensive internal signal processing including Milan-ready AVB

connectivity. Internal switch fabric allowing multiple enclosures to be daisy-chained in order to reduce the amount of cabling

needed in complex system setups.

The operational frequency range of the CS10n is 60Hz to 18kHz. The use of proprietary technologies such as Controlled

Summation Technology and Advanced Cone Architecture allows high maximum SPL and maintains a consistent nominal

horizontal dispersion pattern of 80° down to below 600Hz.

The enclosure is made of marine grade birch plywood with an integrated aluminum and steel four-point rigging system. Without

sacricing low resonance to composite material, the CS10n weighs only 31 kg / 68.4 lbs

Up to twenty CS10n can be flown in the same array when using the Sub-Compact Support Frame (930-0020). Nine rigging

positions available, allowing vertical inter-cabinet splay angles of 0° to 10°. Always consult Adamson CS Software and the CS-

Series Line Array Rigging Manual for correct rigging positions and proper rigging instructions.

The CS10n is intended to be used as a standalone system or with other CS-Series products. The CS10n is designed to pair easily

and coherently with all CS-Series subwoofers.

Product Overview

User Manual

S E R I E S

Power

The CS10n is equipped with one Neutrik powerCON TRUE1 20 A

locking input connector and one Neutrik powerCON TRUE1 20 A

locking output connector on the CS10n.

The accepted voltage range is 100 V - 240 V AC.

The CS10n utilizes advanced loudspeaker technology, augmented with advanced power processing.

Understanding electrical safety is critical in the safe operation of this product.

This product must always be grounded/earthed. Do not ground-lift the AC cable - never use a ground-lifting

adapter or cut the AC cable ground pin.

Improper grounding of connections between loudspeakers and the rest of the audio system may produce

noise or hum, and can damage the input and output stages of the system’s electronics components.

Before applying AC power to the loudspeaker, make sure that the voltage potential difference between the

neutral and earth/ground lines is less than 5 V AC when using single-phase AC wiring.

AC Input AC Output

The line-to-ground voltage should never exceed 250 V AC. The CS10n is protected against excessive voltages

but will need to be serviced should that protection be engaged.

The input voltage supplied to the AC Input connector will be the same voltage supplied to any additional CS-Series

products connected to the CS10n’s AC Output connector. The number of loudspeakers that is safe to link in this

manner is determined by the initial supply voltage, the total current draw of all connected loudspeakers on the

circuit, the circuit breaker rating, and the rating of the utilized AC cabling.

When linking AC power for additional CS-Series products, do not exceed the current capability of the AC Input

connector. Consider the total current draw for all loudspeakers on the circuit, including the rst.

For long periods of idle it is recommended to switch ampliers to standby (requires Adamson CS software) to

reduce cooling fan run-time.

User Manual

S E R I E S

Power

When wiring an AC cable for use with this product in

a single-line system, use the wiring scheme described

below in Table 2 and illustrated with Fig. 1. All work

must be completed by a qualied technician.

Fig. 1

Hot or Live (L) Brown

Neutral (N) Blue

Protective Earth /

Ground (E or PE)

Green and Yellow

Table 2

powerCON True1 AC Cable Input Connector powerCON True1 AC Output Cable Connector

The CS Power Distribution Sysytem (PDS, 914-0002 - 110 V/914-0003 - 230 V) provides six individually

protected AC circuits of 208/230 V, 16 A. When using the Adamson PDS, you can link a maximum of six

CS10n loudspeakers per circuit.

100 V 115V 120 V 208 V 230 V 240 V

RMS Long-Term 4.08 A 3.55 A 3.40 A 1.96 A 1.77 A 1.70 A

RMS Idle 1.08 A 0.94 A 0.90 A 0.52 A 0.47 A 0.45 A

Peak 24.00 A 20.87 A 20.00 A 11.54 A 10.43 A 10.00 A

Table 1 - Single cabinet current draw

Current draw for the CS10n is dynamic and fluctuates as operating levels change.

Brown

Blue

Green and Yellow

User Manual

S E R I E S

Connectivity

On-board Digital Signal Processing (DSP) is accessed via two data ports on

the rear of the cabinet. These ports are used to stream AVB audio as well

as transmit AES70 control data. All CS-Series loudspeakers are congured

to receive two separate LAN signals on a single data link. The CS Network

Distribution System (NDS, 905-0039) combines both LANs on one ethernet

cable. This approach allows network redundancy as well as the ability to

daisy-chain control data and digital audio between enclosures.

When using the NDS, up to six CS-Series loudspeakers can be

daisy-chained on a single network path. This quantity takes into

account the CS Gateway, the CS NDS, the network switches, as well as

each CS loudspeaker to determine the amount of latency created by each

individual hop, and ensuring the total latency remains within pre-determined

parameters. The audio signal latency between each CS10 is 0.26 ms, jump

to jump.

All CS-Series cabinets are Milan-ready. With Milan, every device will

automatically connect with any other Milan device using a variety of standard

formats and denitions in the protocol.

Each CS-Series loudspeaker is equipped with balanced XLR input and output

connectors for line level analog audio signals.

The CS10n’s drivers are powered by a proprietary two channel Class-D

amplier capable of providing up to 2400 W of combined power.

2 THRU

1 IN

ANALOG

DATA

User Manual

S E R I E S

Rack Mounted Systems

AES / ANALOG INPUT

ADAMSON SYSTEMS ENGINEERING

www.adamsonsystems.com

MADEIN CANADA FABRIQUÉAU CANADA

WARNING

MUST BE GROUNDED / EARTHED

WARNING

MUST BE GROUNDED

/ EARTHED

Serial Sticker Here

PRI

SEC

AES / ANALOG OUTPUT

S1 S2 S3

P1 P3

1 2 3 4 5 6 7 8

WORD CLOCK IN

Input 100V - 240V,

50/60Hz, 1A

WORD CLOCK OUT

15 Vdc

STATUS OUTPUTS

INPUTS

1 - 8 1 - 4

PRI

SEC

SEC USB

GATEWAY

CS Gateway Front

CS Gateway Back

P1 P3P2 S1 S3 DATA AES 1 AES 2 AES3S2

BRIDGE

CS Bridge Front

CS Bridge Back

FIBRE IN / THRU

P1 P2

P2 P1

S1 S2

A1-1 L2

A1-2

A2-2

A1-3

A2-3

A2-1

S2 S1

ANALOG 1 OUTPUT

ANALOG 2

RJ45 IN/THRU

NETWORK DISTRIBUTION SYSTEM

ADAMSON SYSTEMS ENGINEERING

www.adamsonsystems.com

MADEIN CANADA FABRIQUÉAU CANADA

Serial Sticker Here

OUT 1 OUT 2 OUT 3 PRI

SEC

PRI

SEC

OUT 5 OUT 6OUT 4

CS NDS Front

CS NDS Back

ADAMSON SYSTEMS ENGINEERING

www.adamsonsystems.com

MADEIN CANADA FABRIQUÉAU CANADA DATA

AUX OUTLET 1

100 -120V~ 50/60Hz 5A

AUX OUTLET 2

100 -120V~ 50/60Hz 5A

Aux Outlets 1&2 Supplied

from phase 1 of Power

Inlet A, via Aux breaker

on front panel. 5Amax.

Power Inlet A

3Ø/N/PE ~ 120/208V

50/60Hz 28/16A Y/∆

Power Inlet B

3Ø/N/PE ~ 120/208V

50/60Hz 28/16A Y/∆

WARNING

THISEQUIPMENT IS SUPPLIED BY TWO SOURCES OF POWER

Nouser serviceable parts inside. Installation and servicing to be

carriedout by authorized personnel only

WARNING

MUST BE GROUNDED/ EARTHED

Serial Sticker Here

THIS DEVICE COMPLIES WITH PART15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING

TWO CONDITIONS:

1. THIS DEVICE MAY NOTCAUSE HARMFUL INTERFERENCE.

2. THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED,INCLUDING INTERFERENCE THAT MAY

CAUSEUNDESIRED OPERATION.

ADAMSON SYSTEMS ENGINEERING

www.adamsonsystems.com

MADEIN CANADA FABRIQUÉAU CANADA DATA

AUX OUTLET 1

220 -240V~ 50/60Hz 5A

AUX OUTLET 2

220 -240V~ 50/60Hz 5A

Aux Outlets 1&2 Supplied

from phase 1 of Power

Inlet A, via Aux breaker

on front panel. 5A max.

Power Inlet A

3Ø/N/PE ~ 220/240V

50/60Hz 28/32A Y

WARNING

Nouser serviceable parts inside.

Installationand servicing tobe carriedout by authorized personnel only

WARNING

MUST BE GROUNDED / EARTHED

Serial Sticker Here

THIS DEVICE COMPLIES WITH PART15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING

TWO CONDITIONS:

1. THIS DEVICE MAY NOTCAUSE HARMFUL INTERFERENCE.

2. THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED,INCLUDING INTERFERENCE THAT MAY

CAUSEUNDESIRED OPERATION.

STATUS

OUTPUT 1- 6

200-240V~16A

50/60 Hz

200-240V~16A

50/60 Hz

All Outputs

200-240V~16A

50/60 Hz

POWER DISTRIBUTION SYSTEM

CS PDS Front

CS PDS Back

CS Gateway (913-0003) - The AVB on-ramp into the CS-Series ecosystem,

the CS Gateway is a 16x16 matrix with 16 channels of user accessible DSP,

containing dual-LAN, Milan-ready AVB, AES/EBU, and analog connections.

The Gateway converts AVB to and from analog and AES/EBU. An extremely

powerful tool, the Gateway’s network connectivity also allows for integrating

other systems link broadcast feeds or matrixing multiple consoles in a festi-

val environment.

CS Power Distribution System PDS (914-0002/914-0003) - Available in

110 V (2x L21-30) and 230 V (32 A CEE) models, the PDS is designed to en-

sure that all CS-Series system components receive ample power. The PDS

provides six circuits of 208 V or 230 V, 16 A offered via powerCON or Socapex

outputs. An integrated data port allows users to monitor consumption data,

both per power output and for overall draw.

CS Network Distribution System NDS (905-0039) - The NDS is a network

and analog patch bay that allows users to send redundant audio and control

to CS-Series loudspeakers on a single network cable. The NDS combines

LAN A and B network ports with 2 AVB switches.

CS Bridge (913-0005) - The CS Bridge is designed to replace existing net-

work infrastructure in Adamson’s E-Rack, allowing users to seamlessly in-

tegrate the CS-Series into their existing inventories by converting dual-LAN,

Milan-ready AVB signal to AES/EBU for networking to existing Lab.gruppen

ampliers, while also offering six channels of DSP per unit.

Altri manuali per CS Series

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Adamson Altoparlanti

Adamson

Adamson IS7c Manuale utente

Adamson

Adamson IS Series Manuale utente

Adamson

Adamson S10n Manuale utente

Adamson

Adamson S7 Manuale utente

Adamson

Adamson S-SERIES Manuale utente

Adamson

Adamson CS Series Manuale utente

Adamson

Adamson S-SERIES Manuale utente

Adamson

Adamson IS7p Manuale utente

Adamson

Adamson M15 Manuale utente

Adamson

Adamson Point Series Manuale utente

Adamson

Adamson CS Series Manuale utente

Adamson

Adamson S10p Manuale utente

Adamson

Adamson IS7 Manuale utente

Manuali Altoparlanti popolari di altre marche

argon audio

argon audio IE20 Manuale utente

Denon

Denon SC-N7 Manuale utente

Gemline

Gemline Ace 3952 Manuale utente

Focal

Focal ON WALL 300 Manuale di istruzioni

HEADRUSH

HEADRUSH Maximus HRSP 5024 Manuale utente

SoundLogic

SoundLogic BCCS-6/6395 Manuale utente

Peavey

Peavey DTH 218 Manuale utente

Avantree

Avantree Pluto Air Manuale utente

Morel

Morel Integra Series INTEGRA OVATION 4 Manuale utente

Oppo

Oppo SONICA Manuale utente

Bose

Bose SoundLink Wireless Music System Manuale utente

Rocksteady

Rocksteady Stadium Manuale utente

Bowers & Wilkins

Bowers & Wilkins 4 Manuale utente

Sonance

Sonance SONOS OUTDOOR Series Manuale utente

Electro-Voice

Electro-Voice EVID FM4.2 Manuale utente

Pioneer

Pioneer XW-HTD630 Manuale utente

Onn

Onn BWA16AA002 Manuale utente

HP GL313AA - USB Speakers PC Multimedia Manuale utente