ADTRAN ATLAS 800 Series Module QUAD E1 Manuale utente

ATLAS 800 SERIES DUAL VIDEO MODULE

User Manual

1200773L1 ATLAS 800 Series Dual Video Module

61200773L1-1A

June 2002

Trademarks

Any brand names and product names included in this manual are trademarks, registered trademarks, or

trade names of their respective holders.

To the Holder of the Manual

The contents of this manual are current as of the date of publication. ADTRAN reserves the right to

change the contents without prior notice.

In no event will ADTRAN be liable for any special, incidental, or consequential damages or for

commercial losses even if ADTRAN has been advised thereof as a result of issue of this publication.

901 Explorer Boulevard

P.O. Box 140000

Huntsville, AL 35814-4000

Phone: (256) 963-8000

Printed in U.S.A.

Notes provide additional useful information.

Cautions signify information that could prevent service interruption.

Warnings provide information that could prevent damage to the equipment or

endangerment to human life.

Affidavit Requirements for Connection to Digital Services

• An affidavit is required to be given to the telephone company whenever digital terminal equipment

without encoded analog content and billing protection is used to transmit digital signals containing

encoded analog content which are intended for eventual conversion into voiceband analog signals

and transmitted on the network.

• The affidavit shall affirm that either no encoded analog content or billing information is being

transmitted or that the output of the device meets Part 68 encoded analog content or billing

protection specifications.

• End user/customer will be responsible for filing an affidavit with the local exchange carrier when

connecting unprotected customer premise equipment (CPE) to 1.544 Mbps or subrate digital

services.

Until such time as subrate digital terminal equipment is registered for voice applications, the affidavit

requirement for subrate services is waived.

Affidavit for Connection of Customer Premises Equipment

to 1.544 Mbps and/or Subrate Digital Services

For the work to be performed in the certified territory of ___________________ (telco name)

State of ________________

County of ________________

I, _______________________ (name), ____________________________________ (business

address),

____________________ (telephone number) being duly sworn, state:

I have responsibility for the operation and maintenance of the terminal equipment to be

connected to 1.544 Mbps and/or ________ subrate digital services. The terminal equipment to be

connected complies with Part 68 of the FCC rules except for the encoded analog content and

billing protection specifications. With respect to encoded analog content and billing protection:

( ) I attest that all operations associated with the establishment, maintenance, and adjustment of the

digital CPE with respect to analog content and encoded billing protection information

continuously complies with Part 68 of the FCC Rules and Regulations.

( ) The digital CPE does not transmit digital signals containing encoded analog content or billing

information which is intended to be decoded within the telecommunications network.

( ) The encoded analog content and billing protection is factory set and is not under the control of the

customer.

I attest that the operator(s)/maintainer(s) of the digital CPE responsible for the establishment,

maintenance, and adjustment of the encoded analog content and billing information has (have)

been trained to perform these functions by successfully having completed one of the following

(check appropriate blocks):

( ) A. A training course provided by the manufacturer/grantee of the equipment used to encode

analog signals; or

( ) B. A training course provided by the customer or authorized representative, using training

materials and instructions provided by the manufacturer/grantee of the equipment used to

encode analog signals; or

( ) C. An independent training course (e.g., trade school or technical institution) recognized by the

manufacturer/grantee of the equipment used to encode analog signals; or

( ) D. In lieu of the preceding training requirements, the operator(s)/maintainer(s) is (are) under the

control of a supervisor trained in accordance with _________ (circle one) above.

I agree to provide ______________________ (telco’s name) with proper documentation to

demonstrate compliance with the information as provided in the preceding paragraph, if so

requested.

_________________________________Signature

_________________________________Title

_________________________________ Date

Transcribed and sworn to before me

This ________ day of _______________, _______

_________________________________

Notary Public

My commission expires:

_________________________________

Federal Communications Commission Radio Frequency Interference Statement

This equipment has been tested and found to comply with the limits for a Class A digital device,

pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection

against harmful interference when the equipment is operated in a commercial environment. This

equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in

accordance with the instruction manual, may cause harmful interference to radio frequencies.

Operation of this equipment in a residential area is likely to cause harmful interference in which case

the user will be required to correct the interference at his own expense.

Canadian Emissions Requirements

This digital apparatus does not exceed the Class A limits for radio noise emissions from digital

apparatus as set out in the interference-causing equipment standard entitled “Digital Apparatus,”

ICES-003 of the Department of Communications.

Cet appareil numérique respecte les limites de bruits radioelectriques applicables aux appareils

numériques de Class A prescrites dans la norme sur le materiel brouilleur: “Appareils Numériques,”

NMB-003 edictee par le ministre des Communications.

Shielded cables must be used with this unit to ensure compliance with Class A FCC

limits.

Changes or modifications to this unit not expressly approved by the party

responsible for compliance could void the user’s authority to operate the

equipment.

Warranty and Customer Service

ADTRAN will repair and return this product within five years from the date of shipment if it does not

meet its published specifications or fails while in service. For detailed warranty, repair, and return

information refer to the ADTRAN Equipment Warranty and Repair and Return Policy Procedure.

Return Material Authorization (RMA) is required prior to returning equipment to ADTRAN.

For service, RMA requests, or further information, contact one of the numbers listed at the end of this

section.

LIMITED PRODUCT WARRANTY

ADTRAN warrants that for five years from the date of shipment to Customer, all products

manufactured by ADTRAN will be free from defects in materials and workmanship. ADTRAN also

warrants that products will conform to the applicable specifications and drawings for such products, as

contained in the Product Manual or in ADTRAN's internal specifications and drawings for such

products (which may or may not be reflected in the Product Manual). This warranty only applies if

Customer gives ADTRAN written notice of defects during the warranty period. Upon such notice,

ADTRAN will, at its option, either repair or replace the defective item. If ADTRAN is unable, in a

reasonable time, to repair or replace any equipment to a condition as warranted, Customer is entitled to

a full refund of the purchase price upon return of the equipment to ADTRAN. This warranty applies

only to the original purchaser and is not transferable without ADTRAN's express written permission.

This warranty becomes null and void if Customer modifies or alters the equipment in any way, other

than as specifically authorized by ADTRAN.

EXCEPT FOR THE LIMITED WARRANTY DESCRIBED ABOVE, THE FOREGOING

CONSTITUTES THE SOLE AND EXCLUSIVE REMEDY OF THE CUSTOMER AND THE

EXCLUSIVE LIABILITY OF ADTRAN AND IS IN LIEU OF ANY AND ALL OTHER

WARRANTIES (EXPRESSED OR IMPLIED). ADTRAN SPECIFICALLY DISCLAIMS ALL

OTHER WARRANTIES, INCLUDING (WITHOUT LIMITATION), ALL WARRANTIES OF

MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. SOME STATES DO

NOT ALLOW THE EXCLUSION OF IMPLIED WARRANTIES, SO THIS EXCLUSION MAY

NOT APPLY TO CUSTOMER.

In no event will ADTRAN or its suppliers be liable to the Customer for any incidental, special,

punitive, exemplary or consequential damages experienced by either the Customer or a third party

(including, but not limited to, loss of data or information, loss of profits, or loss of use). ADTRAN is

not liable for damages for any cause whatsoever (whether based in contract, tort, or otherwise) in

excess of the amount paid for the item. Some states do not allow the limitation or exclusion of liability

for incidental or consequential damages, so the above limitation or exclusion may not apply to the

Customer.

Customer Service, Product Support Information, and Training

ADTRAN will repair and return this product if within five years from the date of shipment the product

does not meet its published specification or the product fails while in service.

A return material authorization (RMA) is required prior to returning equipment to ADTRAN. For

service, RMA requests, training, or more information, use the contact information given below.

Repair and Return

If you determine that a repair is needed, please contact our Customer and Product Service (CAPS)

department to have an RMA number issued. CAPS should also be contacted to obtain information

regarding equipment currently in house or possible fees associated with repair.

Identify the RMA number clearly on the package (below address), and return to the following address:

Pre-Sales Inquiries and Applications Support

Your reseller should serve as the first point of contact for support. If additional pre-sales support is

needed, the ADTRAN Support web site provides a variety of support services such as a searchable

knowledge base, latest product documentation, application briefs, case studies, and a link to submit a

question to an Applications Engineer. All of this, and more, is available at:

When needed, further pre-sales assistance is available by calling our Applications Engineering

Department.

CAPS Department (256) 963-8722

ADTRAN Customer and Product Service

901 Explorer Blvd. (East Tower)

Huntsville, Alabama 35806

RMA # _____________

http://support.adtran.com

Applications Engineering (800) 615-1176

Post-Sale Support

Your reseller should serve as the first point of contact for support. If additional support is needed, the

ADTRAN Support web site provides a variety of support services such as a searchable knowledge

base, updated firmware releases, latest product documentation, service request ticket generation and

trouble-shooting tools. All of this, and more, is available at:

When needed, further post-sales assistance is available by calling our Technical Support Center.

Please have your unit serial number available when you call.

Installation and Maintenance Support

The ADTRAN Custom Extended Services (ACES) program offers multiple types and levels of

installation and maintenance services which allow you to choose the kind of assistance you need. This

support is available at:

For questions, call the ACES Help Desk.

Training

The Enterprise Network (EN) Technical Training Department offers training on our most popular

products. These courses include overviews on product features and functions while covering

applications of ADTRAN's product lines. ADTRAN provides a variety of training options, including

customized training and courses taught at our facilities or at your site. For more information about

training, please contact your Territory Manager or the Enterprise Training Coordinator.

http://support.adtran.com

Technical Support (888) 4ADTRAN

http://www.adtran.com/aces

ACES Help Desk (888) 874-ACES (2237)

Training Phone (800) 615-1176, ext. 7500

Training Fax (256) 963-6700

Training Email training@adtran.com

Altri manuali per ATLAS 800 Series Module QUAD E1

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali ADTRAN Unità di controllo

ADTRAN

ADTRAN OC-48/STM-16 DWDM SFP Manuale utente

ADTRAN

ADTRAN Octal E&M Manuale utente

ADTRAN

ADTRAN T3 Manuale utente

ADTRAN

ADTRAN E220 HFAC HDSL Manuale del prodotto

ADTRAN

ADTRAN 1442442F1 Manuale utente

ADTRAN

ADTRAN Total Access 300 Series Manuale utente

ADTRAN

ADTRAN Job Aid+ 1442982G7C Manuale utente

ADTRAN

ADTRAN Modem-16 Module Manuale utente

ADTRAN

ADTRAN Quad E1/PRA Manuale utente

ADTRAN

ADTRAN Total Access 351 Series Manuale utente

ADTRAN

ADTRAN MX2820 SCU Manuale utente

ADTRAN

ADTRAN Job Aid+ Total Access 5000 1442910G1C Manuale utente

ADTRAN

ADTRAN Total Access 300 Series Manuale del prodotto

ADTRAN

ADTRAN 1200065L1-1 Manuale utente

ADTRAN

ADTRAN Job Aid+ 1442910G1 Manuale utente

ADTRAN

ADTRAN E1 Manuale utente

ADTRAN

ADTRAN Job Aid+ 1442804G1 Manuale utente

ADTRAN

ADTRAN NetVanta SHDSL Manuale utente

ADTRAN

ADTRAN Job Aid+ 1442940G1 Manuale utente

ADTRAN

ADTRAN SFP GPON ONU Manuale utente

ADTRAN

ADTRAN T200 H2TU-R Manuale utente

ADTRAN

ADTRAN Octal Manuale utente

ADTRAN

ADTRAN U-BR1TE Manuale di istruzioni

ADTRAN

ADTRAN jobAid+ SFP+ 11.3 G BIDI 20KM Manuale utente

Manuali Unità di controllo popolari di altre marche

Festo

Festo Compact Performance CP-FB6-E Manuale elenco delle parti

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Manuale utente

JS Automation

JS Automation MPC3034A Manuale utente

JAUDT

JAUDT SW GII 6406 Series Guida rapida

Spektrum

Spektrum Air Module System Manuale utente

BOC Edwards

BOC Edwards Q Series Manuale utente

KHADAS

KHADAS BT Magic Manuale utente

Etherma

Etherma eNEXHO-IL Manuale utente

PMFoundations

PMFoundations Attenuverter Manuale utente

GEA

GEA VARIVENT Manuale utente

Walther Systemtechnik

Walther Systemtechnik VMS-05 Manuale utente

Altronix

Altronix LINQ8PD Istruzioni per il montaggio

Eaton

Eaton Powerware Series Manuale utente

WAGO

WAGO 750-407/040-000 Manuale utente

Sony

Sony CCU-590 Manuale utente

Graco

Graco 25D614 Manuale utente

Task Force Tips

Task Force Tips YE-RF-900 Manuale di programmazione

Shini

Shini SPV-U Series Manuale utente