ADTRAN ATLAS 800PLUS Manuale utente

ATLAS 800

PLUS

USER MANUAL

Part Number 1200226L1

61200226L1-1A

September 1998

TRADEMARKS:

Windows is a registered trademark of Microsoft Corporation.

DMS 100 is a registered trademark of Northern Telecom.

5ESS is a registered trademark of Lucent.

Lucent Technologies is a registered trademark.

901 Explorer Boulevard

P.O. Box 140000

Huntsville, AL 35814-4000

(256) 963-8000

Printed in U.S.A.

61200226L1-1 ATLAS 800PLUS User Manual iii

ABOUT THIS MANUAL

The ATLAS 800PLUS system consists of the Base Unit and one or more modules.

Each ATLAS 800PLUS option module includes its own User Manual, containing

specific information about installing, configuring, and testing the module.

This manual includes information you need to install, configure, test, and trouble-

shoot an ATLAS 800PLUS system, often referring you to the individual module

manual when applicable.

This manual is arranged so you can quickly and easily find the information you

need. The following is an overview of the contents of this manual:

Introduction

• Chapter 1, Introduction on page 1-1, familiarizes you with the ATLAS 800PLUS

unit and provides some sample ATLAS 800PLUS applications.

Getting Started

• Chapter 2, Installation on page 2-1, describes the rear panel layout and how to

install the ATLAS 800PLUS.

• Chapter 3, Operation on page 3-1, describes the front panel layout and the dif-

ferent ways to operate the ATLAS 800PLUS.

Reference Information

• Chapter 4, Front Panel Operation and Menu Structure on page 4-1, describes how

to navigate the front panel. This chapter also describes each option accessible

through the front panel.

• Chapter 5, Using the Terminal Menu on page 5-1, describes how to navigate the

terminal menus. This chapter also describes each option you can access

through the terminal menus.

Working with the ATLAS 800PLUS

• Chapter 6, Creating a Dedicated Map on page 6-1, provides step-by-step instruc-

tion on how to use the Dedicated Map commands.

• Chapter 7, Creating a Dial Plan on page 7-1, provides step-by-step instructions

on how to create a dial plan for ATLAS.

• Chapter8,UpdatingFirmwareon page 8-1, provides step-by-step instruction on

how to update the ATLAS 800PLUS firmware.

• Chapter 9, SNMP Management on page 9-1, describes how to control the AT-

LAS 800PLUS via SNMP.

• Chapter 10, ADTRAN Utilities on page 10-1, describes the Telnet, VT 100, and

TFTP Server programs delivered with ATLAS 800PLUS.

Appendices

• Appendix A, System Event Logging on page A-1, describes the events ATLAS

800PLUS monitors.

• Appendix B, Troubleshooting on page B-1 describes how to diagnose different

problems you may experience with the ATLAS 800PLUS.

• Appendix C, Warranty and Technical Support Information on page C-1, describes

your warranty and how to contact technical support.

iv ATLAS 800PLUS User Manual 61200226L1-1

FCC regulations require that the following information be provided to the customer in this manual:

1. This equipment complies with Part 68 of the FCC rules. The required label is affixed to the bottom

of the chassis.

2. An FCC compliant telephone cord and modular plug are provided with this equipment. This

equipment is designed to be connected to the telephone network or premises wiring using a com-

patible modular jack which is Part 68 compliant. See Installation Instructions for details.

3. If your telephone equipment (ATLAS) causes harm to the telephone network, the telephone com-

pany may discontinue your service temporarily. If possible, they will notify you in advance. But

if advance notice isn’t practical, you will be notified as soon as possible. You will be advised of your

right to file a complaint with the FCC.

4. Your telephone company may make changes in its facilities, equipment, operations, or procedures

that could affect the proper operation of your equipment. If they do, you will be given advance

notice to give you an opportunity to maintain uninterrupted service.

5. If you experience trouble with this equipment (ATLAS), please contact ADTRAN at (205) 963-8000

for repair/ warranty information. The telephone company may ask you to disconnect this equip-

ment from the network until the problem has been corrected, or until you are sure the equipment

is not malfunctioning.

6. This unit contains no user-serviceable parts.

7. The following information may be required when applying to your local telephone company for

leased line facilities.

Service Type REN/SOC FIC USOC

1.544 Mbps - SF 6.0N 04DU9-BN RJ48C

1.544 Mbps - SF and B8ZS 6.0N 04DU9-DN RJ48C

1.544 Mbps - ESF 6.0N 04DU9-1KN RJ48C

1.544 Mbps - ESF and B8ZS 6.0N 04DU9-1SN RJ48C

ISDN 6.0N 04DU9-ISN RJ48C

61200226L1-1 ATLAS 800PLUS User Manual v

FEDERAL COMMUNICATIONS COMMISSION RADIO FREQUENCY INTERFERENCE STATE-

MENT

This equipment has been tested and found to comply with the limits for a Class A digital device, pur-

suant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against

harmful interference when the equipment is operated in a commercial environment. This equipment

generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance

with the instruction manual, may cause harmful interference to radio frequencies. Operation of this

equipment in a residential area is likely to cause harmful interference in which case the user will be

required to correct the interference at his own expense.

Shielded cables must be used with this unit to ensure compliance with Class A FCC limits.

Change or modifications to this unit not expressly approved by the party responsible for

compliance could void the user’s authority to operate the equipment.

vi ATLAS 800PLUS User Manual 61200226L1-1

AFFIDAVIT REQUIREMENTS FOR CONNECTION TO DIGITAL SERVICES

• An affidavit is required to be given to the telephone company whenever digi-

talterminalequipment without encoded analog contentand billingprotection

is used to transmit digital signals containing encoded analog content which

are intended for eventual conversion into voiceband analog signals and trans-

mitted on the network.

• The affidavit shall affirm that either no encoded analog content or billing in-

formation is being transmitted or that the output of the device meets Part 68

encoded analog content or billing protection specifications.

• End user/customer will be responsible to file an affidavit with the local ex-

change carrier when connecting unprotected customer premise equipment

(CPE) to 1.544 Mbps or subrate digital services.

• Until such time as subrate digital terminal equipment is registered for voice

applications, the affidavit requirement for subrate services is waived.

61200226L1-1 ATLAS 800PLUS User Manual vii

AFFIDAVIT FOR CONNECTION OF CUSTOMER PREMISES EQUIPMENT TO 1.544 MBPS AND/

OR SUBRATE DIGITAL SERVICES

For the work to be performed in the certified territory of ________________________(telco name)

State of ________________

County of ________________

I, _____________________________ (name), _____________________

(business address), ____________________ (telephone number) being

duly sworn, state:

I have responsibility for the operation and maintenance of the terminal equipment to be connected to

1.544 Mbps and/or ________ subrate digital services. The terminal equipment to be connected com-

plies with Part 68 of the FCC rules except for the encoded analog content and billing protection speci-

fications. With respect to encoded analog content and billing protection:

( ) I attest that all operations associated with the establishment, maintenance, and adjustment of the

digital CPE with respect to analog content and encoded billing protection information continu-

ously complies with Part 68 of the FCC Rules and Regulations.

( ) The digital CPE does not transmit digital signals containing encoded analog content or billing

information which is intended to be decoded within the telecommunications network.

( ) The encoded analog content and billing protection is factory set and is not under the control of the

customer.

I attest that the operator(s)/maintainer(s) of the digital CPE responsible for the establishment, mainte-

nance, and adjustment of the encoded analog content and billing information has (have) been trained

to perform these functions by successfully having completed one of the following (check appropriate

blocks):

( ) A. A training course provided by the manufacturer/grantee of the equipment used to encode

analog signals; or

( ) B. A training course provided by the customer or authorized representative, using training mate-

rials and instructions provided by the manufacturer/grantee of the equipment used to encode

analog signals; or

( ) C. An independent training course (e.g., trade school or technical institution) recognized by the

manufacturer/grantee of the equipment used to encode analog signals; or

( ) D. In lieu of the preceding training requirements, the operator(s)/maintainer(s) is (are) under the

control of a supervisor trained in accordance with _________ (circle one) above.

viii ATLAS 800PLUS User Manual 61200226L1-1

I agree to provide ______________________ (telco’s name) with proper documentation to demonstrate

compliance with the information as provided in the preceding paragraph, if so requested.

_________________________________Signature

_________________________________Title

_________________________________ Date

Transcribed and sworn to before me

This ________ day of ________, 199___

_________________________________

Notary Public

My commission expires:

_________________________________

61200226L1-1 ATLAS 800PLUS User Manual ix

CANADIAN EQUIPMENT LIMITATIONS

The Industry Canada Certification label identifies certified equipment. This certification

means that the equipment meets certain telecommunications network protective, opera-

tional, and safety requirements. The Department does not guarantee the equipment will

operate to the user's satisfaction.

Before installing this equipment, users should ensure that it is permissible to be connected to the facil-

ities of the local telecommunications company. The equipment must also be installed using an accept-

able method of connection. In some cases, the company's inside wiring associated with a single line

individual service may be extended by means of a certified connector assembly (telephone extension

cord). The customer should be aware that compliance with the above conditions may not prevent deg-

radation of service in some situations.

Repairs to certified equipment should be made by an authorized Canadian maintenance facility desig-

nated by the supplier. Any repairs or alterations made by the user to this equipment, or equipment

malfunctions, may give the telecommunications company cause to request the user to disconnect the

equipment.

Users should ensure for their own protection that the electrical ground connections of the power util-

ity, telephone lines and internal metallic waterpipe system, if present, are connected together. This

precaution may be particularly important in rural areas.

Users should not attempt to make such connections themselves, but should contact the ap-

propriate electric inspection authority, or an electrician, as appropriate.

The Load Number (LN) assigned to each terminal device denotes the percentage of the total load to be

connected to a telephone loop which is used by the device, to prevent overloading. The termination

on a loop may consist of any combination of devices subject only to the equipment that the total of the

LNs of all devices does not exceed 100.

The ringer equivalence number (REN) assigned to each terminal adapter is used to determine the total

number of devices that may be connected to each circuit. The sum of the RENs from all devices in the

circuit should not exceed a total of 5.0.

xATLAS 800PLUS User Manual 61200226L1-1

Indice

Altri manuali ADTRAN Scheda di rete

ADTRAN

ADTRAN 239 T1 HDSL4 Manuale di istruzioni

ADTRAN

ADTRAN 3192 H2TU-C Manuale utente

ADTRAN

ADTRAN NetVanta 1000R Series Manuale operativo

ADTRAN

ADTRAN ATLAS 800 Series Module Nx56/64 Bonding Manuale utente

ADTRAN

ADTRAN 239 H4R Manuale utente

ADTRAN

ADTRAN 3000 HTU-C Manuale utente

ADTRAN

ADTRAN OPTI-6100 LMX Manuale utente

ADTRAN

ADTRAN NIU3 Manuale di istruzioni

ADTRAN

ADTRAN TOTAL ACCESS OPTI-T200 Manuale utente

ADTRAN

ADTRAN TRACER 6000 SERIES Guida utente

ADTRAN

ADTRAN 5000 Series Manuale operativo

ADTRAN

ADTRAN 3192 H4TU-C Manuale utente

ADTRAN

ADTRAN 3.125 Gigabit Ethernet Manuale utente

ADTRAN

ADTRAN AHT1U Manuale utente

ADTRAN

ADTRAN TRACER Protection Switch Manuale utente

ADTRAN

ADTRAN U-BR1TE Manuale utente

ADTRAN

ADTRAN Type 400 Manuale di istruzioni

ADTRAN

ADTRAN ATLAS 550 Manuale utente

ADTRAN

ADTRAN ATLAS 800 Series Module QUAD E1 Manuale utente

ADTRAN

ADTRAN DDM+ H2TU-C Manuale di istruzioni

ADTRAN

ADTRAN Total Access 1500 Manuale di istruzioni

ADTRAN

ADTRAN 900 Series Manuale utente

ADTRAN

ADTRAN 1000 239 HRE Manuale utente

ADTRAN

ADTRAN HRE/T200 Manuale utente

Manuali Scheda di rete popolari di altre marche

FirstComm

FirstComm OBiWiFi5G Manuale utente

Sun Microsystems

Sun Microsystems Interface Adapter Manuale utente

TRENDnet

TRENDnet TU2-ETG Manuale utente

YASKAWA

YASKAWA SI-EN3 Manuale utente

Paradyne

Paradyne BitStorm 2600 IP DSLAM Manuale utente

Belkin

Belkin F5D7050 Manuale utente

3Com

3Com EtherLink 3C509B Manuale utente

TRENDnet

TRENDnet TEG-PCITX Manuale utente

Cisco

Cisco MC16E Manuale utente

Delta Electronics

Delta Electronics Braking Modules VFDB Series Manuale utente

TwinMOS

TwinMOS Booming Manuale utente

Dialogic

Dialogic Media Board DM/V1200BTEPEQ Manuale utente

Buffalo

Buffalo AirStation WLI-PCM-L11GP Manuale utente

National Instruments

National Instruments NI 9234 Manuale utente

Hama

Hama 49276 Manuale utente

Linksys

Linksys WCF54G - Wireless-G Compact Flash Card Manuale operativo

Compaq

Compaq Wireless LAN 100 Manuale utente

Bose

Bose PowerMatch Dante Manuale utente