Advantech ADAM-5000 Series Manuale utente
ADAM-5000 Series
ADAM-5080
4-channelCounter/Frequency
Module
User's Manual
Copyright Notice
This document is copyrighted, 1999, by Advantech Co., Ltd. All
rights are reserved. Advantech Co., Ltd., reserves the right to make
improvements to the products described in this manual at any time
without notice.
No part of this manual may be reproduced, copied, translated or
transmitted in any form or by any means without the prior written
permission of Advantech Co., Ltd. Information provided in this
manual is intended to be accurate and reliable. However, Advan-
tech Co., Ltd. assumes no responsibility for its use, nor for any
infringements upon the rights of third parties which may result
from its use.
Acknowledgments
ADAM is a trademark of Advantech Co., Ltd.
IBM and PC are trademarks of International Business Machines
Corporation.
Printed in Taiwan. August 1999
A Message to the Customer...
Advantech Customer Services
Each and every Advantech product is built to the most exacting
specifications to ensure reliable performance in adverse industrial
environments. Whether your new Advantech equipment is
destined for the laboratory or the factory floor, you can be assured
that your product will provide the reliability and ease of operation
for which the name Advantech has come to be known.
Your satisfaction is our number one concern. Here is a guide to
Advantech’s customer services. To ensure you get the full benefit
of our services, please follow the instructions below carefully.
Product Warranty
Advantech warrants to you, the original purchaser, that each of its
products will be free from defects in materials and workmanship
for one year from the date of purchase.
This warranty does not apply to any products which have been
repaired or altered by repair personnel other than those authorized
by Advantech, or which have been subject to misuse, abuse,
accident or improper installation. Advantech assumes no liability
as a consequence of such events under the terms of this warranty.
Because of Advantech’s high quality-control standards and
rigorous testing, most of our customers never need to use our
repair service. If an Advantech product ever does prove defective,
it will be repaired or replaced at no charge during the warranty
period. For out-of-warranty repairs, you will be billed according to
the cost of replacement materials, service time and freight. Please
consult your dealer for more details.
Technical Support
For your convenience and to solve your problems in time, please
first try our internet technical support facility:
Advantech homepage
For product information, the latest news, and other information
about Advantech, please refer to this web page.
http://www.advantech.com/ia
Technical Support homepage
http://support.advantech.com
Choose the Industrial Automation Support (IA)
This site includes important information you may need:
• FAQ: frequently asked questions
• Technical Notes
• Utility Disk: DLL drivers for free downloading
• Y2K homepage
• User Manual in electronic files
IA Technical Support E-mail box:
For technical problems and questions, you can e-mail us at this
address:
To ease communication and to save your time, remember to
include in your e-mail the following information related to the
product:
• CPU type and the memory size of your computer
• Operating system on you computer
• Model name of the product / part number
• The attached DLL driver version
• Other applied software packages, if any
Advantech Headquarters
Fl.4 No.108-3, Ming-Chuan Rd.,
Shin-Tien City, Taipei, Taiwan, R.O.C.
TEL: 886-2-2218-4567
FAX: 886-2-2218-1989
If you think you have a defective product, follow these steps:
1. Collect all the information about the problem encountered (e.g.
type of PC, CPU speed, Advantech products used, other
hardware and software used etc.). Note anything abnormal and
list any on-screen messages you get when the problem occurs.
2. Call your dealer and describe the problem. Please have your
manual, product, and any helpful information readily available.
3. If your product is diagnosed as defective, obtain an RMA
(return material authorization) number from your dealer. This
allows us to process your return more quickly.
4. Carefully pack the defective product, a completely filled-out
Repair and Replacement Order Card and a photocopy of dated
proof of purchase (such as your sales receipt) in a shippable
container. A product returned without dated proof of purchase
is not eligible for warranty service.
5. Write the RMA number prominently on the outside of the
package and ship it prepaid to your dealer.
Contents
1. Overview ................................................................. 1
Compatible ADAM-5000 Series Main Units .............................. 1
ADAM-50804-channelCounter/FrequencyModule ....................1
ADAM-5080ModuleDiagram .....................................................2
ADAM-5080ApplicationWiring ..................................................2
ADAM-5080Counter/FrequencyModeSelection........................3
2. Features -- Counter Mode ...................................... 4
Up/DownCounting .....................................................................4
Bi-directionCounting ..................................................................4
3. Features -- Frequency Mode.................................. 5
4. Features -- Alarm Setting........................................ 6
5. Features -- Digital Output Mapping ....................... 9
6. Specifications ....................................................... 11
ADAM-5080TechnicalSpecifications ....................................... 11
7. Command Set ....................................................... 12
Introduction ..............................................................................12
CommandSet..........................................................................12
Tables & Figures
Figure1 ADAM-5080Module ........................................................2
Figure2 Isolated InputLevel.........................................................2
Figure 3 TTL InputLevel ...............................................................3
Figure4 Counter/FrequencyMode ..............................................3
Figure5 WiringforUp/Down Counting ..........................................4
Figure6 Wiringfor Bi-directionCounting.......................................5
Figure7 WiringforFrequency Counting ........................................5
Figure8 Setting Alarm Limit .........................................................6
Figure9 SendingAlarm Signal .....................................................7
Figure10 AlarmSignal ...................................................................7
Figure 11 Digital OutputMapping ....................................................9
Figure12 JumperLocationon theADAM-5080 Module .................10
Figure13 TTL/IsolatedInput LevelSelectting ...............................10
Table 1 ADAM-5080technical specifications ............................. 11
ADAM-5080 Counter/Frequency Module 1
User's Manual
Overview
Compatible ADAM-5000 Series Main Units
ADAM-5080 is a 4-channel counter/frequency module designed to
be implemented within the following Advantech ADAM-5000 series
main units:
ADAM-5000/485 (withfirmware Version A2.3 orabove)
ADAM-5510 (with library Version V1.00 or above)
ADAM-5510/P31 (withI/O driver VersionV1.00 orabove)
ADAM-5080 4-channel Counter/Frequency Module
With ADAM-5080 4-Channel Counter/Frequency Module, users
can select either counter or frequency mode for data output.
ADAM-5080 offers users a variety of very flexible and versatile
applications such as below:
Counter Mode or Frenquency Mode
If you want to measure the number of input signals for totalizer
function, you may use counter mode to measure quantities such as
movement and flow quantity. Alternatively, you can also select
frequency mode to calculate the instantaneous differential of
quantities such as rotating speed, frequency or flow rate, and
present them in specific engineering formats.
Up/Down or Bi-direction Function
When operating in counter mode, you can choose either the
Up/Down function or the Bi-direction function for different applica-
tion purposes. The counter will count up or down according to
your applications. This counting function helps users obtain the
most accurate data.
Alarm Setting Function
While in counter mode, you can set alarm status--Disable and Latch.
If you want to disable it, you can select Disable.If Latch status is
Please make sure that the ADAM-5080 counter/frequency
module is properly inserted into the compatible main units.
2ADAM-5080 Counter/Frequency Module
ADAM-5080 Counter/Frequency Module
selected, it means the Alarm status will be "latched" whenever the
alarm being triggered. Once the alarm status being "latched," it will
thereafter stay in that triggered state. Users will have to issue a
"Clear Alarm Status" command to return the "latched" alarm status
back to normal. Users can designate the high-limit value and low-
limit value to regulate your alarm behavior through the utility
program.
Digital Output Mapping
Users can either run the utility program or issue a "Set Alarm
Connetion" command to designate a specific digital output module
for the alarm signal to be sent through.
ADAM-5080 Module Diagram
Figure1ADAM-5080Module
ADAM-5080 Application Wiring
Figure2 IsolatedInput Level
C0A+
COA-
COB+/D+
C1A+
C1A-
C1B+/D+
C1B-/D-
C2A+
C2A-
C2B+/D+
C2B-/D-
C3A+
C3A-
C3B+/D+
C3B-/D-
COB-/D-
GND
GND
GND
GND
GND
GND
GND
GND
ISOLATE TTL
ADAM-5080
4 C/F
V
0
Internal Logic
Vcc
Questo manuale è adatto per i seguenti modelli
1
Indice
Altri manuali Advantech Unità di controllo
Advantech
Advantech SOM 144 Guida
Advantech
Advantech SOM-5897 Manuale utente
Advantech
Advantech AIW-357 DK-G1P Manuale utente
Advantech
Advantech WISE-1510 Manuale utente
Advantech
Advantech PCA-TPMSPI Manuale di installazione e funzionamento
Advantech
Advantech AIW-357 DK-G2U Manuale utente
Advantech
Advantech RISC SOM-A2558 Series Manuale utente
Advantech
Advantech MIC-75G20-10B1 Manuale di installazione e funzionamento
Advantech
Advantech MIC-75M40 Manuale di installazione e funzionamento
Advantech
Advantech PCM-23C1CF Manuale utente
Advantech
Advantech PCM-3680 Manuale di installazione e funzionamento
Advantech
Advantech USB-4716 Manuale di installazione e funzionamento
Advantech
Advantech SOM-5893 Manuale utente
Advantech
Advantech AMAX-3285IO Manuale di installazione e funzionamento
Advantech
Advantech PCM-3526 Manuale di installazione e funzionamento
Advantech
Advantech PCM-3612I Manuale di installazione e funzionamento
Advantech
Advantech B+B SmartWorx iMcV-Giga-MediaLinX TX/SFP Manuale utente
Advantech
Advantech IPMI-1000 Manuale di installazione e funzionamento
Advantech
Advantech MOS-1120Y-0201E Manuale utente
Advantech
Advantech USB-4750 Manuale utente
Manuali Unità di controllo popolari di altre marche
Festo
Festo Compact Performance CP-FB6-E Manuale elenco delle parti
Elo TouchSystems
Elo TouchSystems DMS-SA19P-EXTME Manuale utente
JS Automation
JS Automation MPC3034A Manuale utente
JAUDT
JAUDT SW GII 6406 Series Guida rapida
Spektrum
Spektrum Air Module System Manuale utente
BOC Edwards
BOC Edwards Q Series Manuale utente
