Advantech WISE-4050 Manuale utente

Advantech™WISE-4050

Installation Guide for TIG 2go

Revision 1.4.

Table of contents

1. Scope..........................................................................................................3

1.1. Hardware variants .........................................................................................................................3

1.2. Reference......................................................................................................................................3

2. Quick start..................................................................................................4

2.1. Setup .............................................................................................................................................4

2.2. Configure.......................................................................................................................................4

2.3. Connect .........................................................................................................................................4

2.4. Register.........................................................................................................................................4

3. Hardware setup..........................................................................................5

3.1. Step 1: Internet connection ...........................................................................................................5

3.1.1. Wi-Fi................................................................................................................................. 5

3.1.2. LAN...................................................................................................................................5

3.2. Step 2: Cloud connection..............................................................................................................6

3.3. Step 3: Device configuration .........................................................................................................6

3.4. Step 4: Device registration............................................................................................................7

4. Input port mapping....................................................................................8

4.1. Status information..........................................................................................................................8

4.2. Counter information.......................................................................................................................9

4.2.1. Alternate signaling systems..............................................................................................9

4.2.2. Concurrent signaling systems........................................................................................10

5. Revision index .........................................................................................11

1. Scope

This installation guide describes the configuration of Advantech™ WISE-4050

(device) for usage with TIG 2go. This device is connected with four wires to dig-

ital outputs of the machine and sends this information to the TIG 2go cloud.

Installation and commissioning, such as cabling, shall be carried out in a thoroughly

professional manner by duly trained and qualified personnel. In case of any queries re-

garding the machine interface, please contact the machine manufacturer.

1.1. Hardware variants

Advantech™ provides two hardware variants (WIFI and LAN version):

Advantech™ WISE-4050

Advantech™ WISE-4050/LAN

For more information on the device please refer to the manual by the manufacturer which can be

downloaded here.

1.2. Reference

WISE 4050 is a product of:

Advantech Co., Ltd., No. 1, Alley 20, Lane 26, Rueiguang Road, Neihu District, Taipei 11491, Taiwan,

R.O.C.

Tel: 886-2-2792-7818, Toll Free: 0800-777-111 https://www.advantech.com

2. Quick start

2.1. Setup

Switch off the machine and wire the Advantech™ device with the machine (24V DC). Default mapping:

DI0: Online/Offline

DI1: Producing/Not Producing

DI2: Good Cycle

DI3: Bad Cycle

2.2. Configure

Switch on the machine and configure the device:

Configure internet connection depending on local network.

Configure MQTT broker settings:

oMQTT Host Name: mqtt-cred.tig2go.com

oPort Number: 61614

oSSL secure: Enable

oUser Name: tig2gouser

oPassword: abysm-manager-bump-boulder

Enable logging via push notifications for all channels (Change of State)

Recalibrate Time

2.3. Connect

Connect the device with the internet (cable or Wi-Fi).

2.4. Register

Serial number

Customer details

Machine name and configuration

3. Hardware setup

3.1. Step 1: Internet connection

Connect the device with the internet.

3.1.1. Wi-Fi

Power up using a 10~30V power sup-

ply, that's connected between the +Vs

and -Vs pin.

Enable the Wi-Fi interface on your de-

vice and make sure the Wi-Fi adapter

is in DHCP mode.

Select the SSID: "WISE- 4050_MAC"

Open the browser and enter the config-

uration page (http://192.168.1.1/con-

fig). Login with account: root and password: 00000000.

Scroll to "Network Information", click "Go to Configuration" and enter your Wi-Fi connection infor-

mation.

3.1.2. LAN

Power up using a 10~30V power sup-

ply, that's connected between the +Vs

and -Vs pin.

Use an Ethernet cable to connect be-

tween the RJ- 45 port and the Ethernet

switch

Set the IP address of your device to the same as your IP domain. The default IP address of the

WISE module is 10.0.0.1. For example, set your PC’s IP address to 10.0.0.100.

Open the browser and enter the configuration page (http://10.0.0.1/config). Login with account:

root and password: 00000000.

Scroll to "Network Information", click "Go to Configuration" and enter your network configuration.

3.2. Step 2: Cloud connection

Connect the device with the MQTT broker.

In "Configuration" select tab "Cloud"

In Cloud Configuration Select Service

"iSensing MQTT" Note: If this option is not

available, please install the latest firmware

directly from Advantech™

Enter the MQTT Settings:

oMQTT Host Name: mqtt-

cred.tig2go.com

oPort Number: 61614

oSSL secure:

oEnable

oUser Name: tig2gouser

oPassword: abysm-manager-bump-boulder

oHearbeat Frequency (sec): 60

oPublish QoS: 2

oSubscribe QoS: 2

Submit and ensure that the Connection Status is "Connected"

3.3. Step 3: Device configuration

Configure the device, so that it sends the data to the MQTT broker.

Go to "Advanced" -> "Data Logger"

In tab "Data Configuration":

oIn "Log Data" -> "Channel Fields": For all Input Channels (0 - 3) enable "Change of

State"

In tab "Logger Configuration":

oIn "Push Notification (JSON format)"

enable "I/O Log"

activate "Push Timestamp"

Set "Timestamp Format" to "Coordinated Universal Time(UTC)"

3.4. Step 4: Device registration

Send the following information via e-mail to [email protected]:

Serial number of the device. The serial number

is 12 digits long and printed on a sticker on the

back of the device

oCustomer details:

oCustomer name

oAdmin email*

oRead-Only email*

* The login credentials for the ad-

min and read-only user are sent

to the respective email ad-

dresses. The admin email will

have more rights on the TIG2go platform.

Name of the connected machine

The name will be used to identify the machine in the TIG2go platform. Currently only alphanu-

meric characters are supported.

Configuration of the connected machine

oCounter information for Input Ports 3 and 4 (“Alternate signaling” or “Concurrent

signaling”)

4. Input port mapping

In order to get correct information, TIG 2go requires the input ports DI0 to DI3 be mapped to the fol-

lowing signals from the machine:

4.1. Status information

The first two wires are expected to be connected to a continuous signal for the machine and produc-

tion status. Each change of TRUE/FALSE in any direction is considered a status change and will be

recorded.

Input Port

Meaning

Explanation

DI0

ONLINE / OF-

FLINE

Signals the “on” state of the connected device, e.g. a machine. A “True”

signal is interpreted as ONLINE, “False” as OFFLINE.

In order to provide useful information, the machine interface should not

just signal its own “power on” status, but communicate whether or not

the machine itself is up and “ready to go”. The informative value of this

status information depends on the ability of the machine’s host com-

puter to determine and transmit a meaningful machine ONLINE / OF-

FLINE condition.

DI1

PRODUCING /

NOT PRO-

DUCING

Signals whether the device is running.

A “True” signal is interpreted as PRODUCING. This status should be

signaled whenever the production status of the machine is “Production”.

A “False” signal is interpreted as NOT PRODUCING.

As with the ON / OFF status, the informative value of the RUNNING /

STOPPED status information depends on the ability of the machine’s

host computer to properly determine and transmit the machine’s current

production status.

4.2. Counter information

With the last two wires TIG 2go maintains two counters for produced parts—one for good parts

(“yield”) and one for bad parts (“scrap”). In order to provide these counters with meaningful infor-

mation, the machine has to signal after each cycle

that a cycle was completed, and

whether the cycle was good or bad.

There are two different ways for machines to signal good and bad production cycles. TIG 2go will han-

dle the different behavior of the machine interface on the platform according to the machine specific

configuration provided during registration.

4.2.1. Alternate signaling systems

After every completion of a good cycle this information is signaled over one wire (the “good” signal

line), whereas a bad cycle is signaled over the other wire (the “bad” signal line). Good and bad cycles

will therefore result in raising a “True” signal in one of the two counter lines (but never in both of them

at the same time).

Input Port

Meaning

Explanation

DI2

GOOD CY-

CLE

Signals the completion of a “good” cycle that resulted in the production of

a good part or several good parts, depending on the mold’s cavity. The

part or parts produced are counted as good.

On each “True” signal received, the GOOD PARTS COUNTER is incre-

mented.

DI3

BAD CYCLE

Signals the completion of a “bad” cycle that resulted in the production of

scrap.

On each “True” signal received, the BAD PARTS COUNTER is incre-

mented.

4.2.2. Concurrent signaling systems

After each completion of a cycle (good or bad), the “cycle completed” information is signaled over one

wire (the “cycle” signal line). If at the same moment nothing is signaled over the other wire (the “scrap”

signal line), the cycle is considered good. If the cycle was bad, the machine will signal that information

over the “scrap” signal line at the same time it signals the “cycle completed” information over the “cy-

cle” signal line. Bad cycles will therefore result in raising a “True” signal in both counter signal input

ports. The TIG daas system will recognize and correctly handle these situations by counting such cy-

cles as bad.

Input Port

Meaning

Explanation

DI2

CYCLE COM-

PLETED

Signals the completion of a cycle.

On each “True” signal received, the GOOD PARTS COUNTER is in-

cremented if and only if the BAD CYCLE INDICATOR at this mo-

ment signals “False”.

DI3

BAD CYCLE INDI-

CATOR

Signals that the completed cycle was "bad" and resulted in the pro-

duction of scrap.

On each “True” signal received, the BAD PARTS COUNTER is in-

cremented.

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Advantech Sistema I/O

Advantech

Advantech ADAM-6300 Series Manuale utente

Advantech

Advantech USB-5801 Manuale utente

Advantech

Advantech WISE-2200-M Manuale di installazione e funzionamento

Advantech

Advantech WISE-4060 Manuale di installazione e funzionamento

Advantech

Advantech PCIE-1762H Manuale utente

Advantech

Advantech ADAM-6100PN Series Manuale utente

Advantech

Advantech ADAM-5000/TCP Series Manuale utente

Advantech

Advantech I/O Module 5000 Series Manuale utente

Advantech

Advantech APAX-5013 Manuale utente

Advantech

Advantech PCL-722 Manuale utente

Advantech

Advantech ECU-P1702 Manuale di installazione e funzionamento

Advantech

Advantech WISE-4000 Series Manuale utente

Advantech

Advantech USB-5820 Manuale utente

Advantech

Advantech PCI-1713 Manuale utente

Advantech

Advantech PCL-733 Manuale utente

Advantech

Advantech PCI-1750 Manuale utente

Advantech

Advantech MIC-75G20 Manuale di installazione e funzionamento

Advantech

Advantech AIIS-1750 Manuale di installazione e funzionamento

Advantech

Advantech PCM-3730 Manuale utente

Advantech

Advantech PCL-730 Manuale di installazione e funzionamento

Advantech

Advantech ADAM-6156PN Manuale utente

Advantech

Advantech 98910770500 Manuale di installazione e funzionamento

Advantech

Advantech MIOe-220 Manuale di installazione e funzionamento

Advantech

Advantech AIIS-E730 Manuale di installazione e funzionamento

Manuali Sistema I/O popolari di altre marche

WAGO

WAGO 750-344 Manuale utente

Teknim

Teknim TWM-1887 Manuale di istruzioni

Intelligent Appliance

Intelligent Appliance IA-2662-E Manuale utente

BERGHOF

BERGHOF ECC DIO 16/16 Manuale di istruzioni

Festo

Festo CP-E08-M12-CL Manuale utente

Measurement Computing

Measurement Computing PCI-DAS64/M1/16 Manuale utente

Hitachi

Hitachi HX-RIO3 Series Manuale utente

NUUO

NUUO SCB-A08 Manuale utente

M-system

M-system R3Y-RS8 Manuale utente

jablotron

jablotron JB-110N Manuale utente

Omron

Omron SYSMAC C200H Manuale utente

DOLD

DOLD SAFEMASTER M Manuale utente

ABB

ABB OPT-MF-001 Manuale utente

Omron

Omron SYSMAC C2000H Manuale utente

Helmholz

Helmholz TB20 Manuale utente

ICP DAS USA

ICP DAS USA tM-AD2 Manuale utente

Automationdirect.com

Automationdirect.com DL305 Manuale utente

WAGO

WAGO I/O-SYSTEM 750 Manuale utente