Advantech SOM-DB4400 Manuale utente
SOM-DB4400
ETX Development Board
User's Manual
ii
Copyright notice
This document is copyrighted, 2001, byAdvantech Co., Ltd.All rights
are reserved. The original manufacturer reserves the right to make
improvements to the products described in this manual at any time
without notice.
No part of this manual may be reproduced, copied, translated or
transmitted in any form or by any means without the prior written
permission of the original manufacturer. Information provided in this
manual is intended to be accurate and reliable. However, the original
manufacturer assumes no responsibility for its use, nor for any
infringements upon the rights of third parties which may result from its
use.
Acknowledgements
SOM and DTOS are trademarks ofAdvantech Co., Ltd.
AMD is a trademark ofAdvanced Micro Devices, Inc.
Award is a trademark ofAward Software International, Inc.
Cyrixis atrademark ofCyrix Corporation.
IBM, PC/AT, PS/2 andVGAare trademarks of International Business
Machines Corporation.
Intel and Pentium are trademarks of Intel Corporation.
Microsoft Windows®is a registered trademark of Microsoft Corp.
RTLis atrademark of RealtekSemiconductor Co.,Ltd.
C&T is a trademark of Chips andTechnologies, Inc.
UMC is a trademark of United Microelectronics Corporation.
Winbond is a trademark of Winbond Electronics Corp.
STPC is a trademark ofSGS Thomson Corp.
For more information on this and other Advantech products, please
visitour websiteat:http://www.advantech.com
For technical support and service, please visit our support website at:
http://www.advantech.com/support
Thismanualis forthe SOM-DB4400
PartNo.2006440001
2nd Edition Printed in Taiwan June 2002
iii
Version History
June,2002:SOM-DB4400 User'sManual 2nd edition(Part no.
2006440001)Correctederror onpage 14:Sec.2.5 ConnectorLocation
X3 and X4 reversed.
September2001,SOM-DB4400 User'sManual 1st edition(Part no.
2006440000)
iv
Packing list
Before you begin installing your card, please make sure that the
following materials have been shipped:
• 1 SOM-DB4400ETX DevelopmentBoard
• CD-ROM or Disks for utility, drivers, including manual (in PDF
format)
• 1 warranty certificate
If any of these items are missing or damaged, contact your distributor
or sales representative immediately.
v
Contents
CHAPTER 1 General Information .................................. 1
1.1 Introduction ......................................................................... 2
1.2 Specifications ....................................................................... 3
1.3 Safety precautions............................................................... 4
1.4 Board layout: dimensions .................................................. 5
CHAPTER 2 Connecting Peripherals ........................... 7
2.1 Board layout: Jumper and connector locations ............. 8
2.2 Jumpers and Connectors................................................... 9
2.3 Setting jumpers ................................................................. 13
2.4 Connector Locations ........................................................ 14
2.5 Pin Assignments (X1,X2,X3,X4 connectors) ................ 15
2.6 Safety precautions............................................................. 15
CHAPTER 3 Connector Descriptions ......................... 17
3.1 IDE hard drive connector (CN7).................................... 18
3.2 CompactFlash disk interface (CN6)............................... 19
3.3 Floppy drive connector (CN8) ........................................ 19
3.4 Parallel port connector (CN19) ...................................... 20
3.5 PS/2 keyboard and mouse connector (CN29) .............. 21
3.6 IR header (CN14) ............................................................. 21
3.7 Audio interfaces (CN3) .................................................... 21
3.9 Serial ports (CN13, CN15) .............................................. 22
3.10 VGA interface connections (CN11, CN31) ................. 22
3.11 Ethernet RJ-45 connector and USB connector(C21) 24
3.12 TV-out S-video connector (CN28) ............................... 24
3.13 PCI slots (PCI 1~3) ........................................................ 24
3.14 400-pin ETX socket(X1, X2, X3, X4) .......................... 24
APPENDIX A Pin Assignments .................................... 25
A.1 ATX power connector (CN2).......................................... 26
A.2 IDE hard drive connector (CN7) ................................... 27
vi
A.3 Floppy drive connector (CN8) ....................................... 28
A.4 IR connector (CN14) ....................................................... 29
A.5 S-Video connector (CN28).............................................. 30
A.6 TV-out connector (CN28) ............................................... 30
A.7 24-bit Flat panel connector (CN31)............................... 31
A.9 LCD Signal Mapping ....................................................... 32
A.10 Parallel Port connector (CN19) ................................... 33
A.11 VGA connector (CN11) ................................................. 34
A.12 COM1 RS-232 serial port (CN13) .............................. 35
A.13 COM2 RS-232 connector (CN15)............................... 35
A.14 Keyboard connnector (CN 29 lower).......................... 36
A.15 Mouse connnector (CN 29 upper) .............................. 36
APPENDIX B LVDS Connection................................. 37
B.1 LVDS Introduction ......................................................... 38
B.2 LVDS Pin assingments .................................................. 39
CHAPTER
General Information
This chapter provides background
informationfor theSOM-DB4400.
Sections include:
• Card specifications
• Board layout
1
2SOM-DB4400 User's Manual
1.1 Introduction
With the SOM-DB4400 and its reference circuits, users may quickly
test their specific SOM-ETX module and easily design their own
solution boards for the SOM-ETX.
Advantech’s new SOM-ETX is a form factor designed to increase
efficiency and effectiveness in embedded systems. This product
facilitates easier system design by eliminating expensive connec-
tors and cumbersome adapter cables. These solutions make it more
simple to customize a system using an off the shelf embedded PC
and reduces the time to market of the product. This standard is a
reference for dimensions and pinouts of SOM-ETX boards. Each SOM-
ETX CPU board provides a different set of features. Please see the
SOM-ETX CPU board manual for details about the product or
contact your supplier to enquire about supported features.
The SOM-ETX boards are interchangeable as long as they provide
the same features (i.e. 2 channel LVDS video output). In order to
maintain this compatibility, ask your supplier or application
engineers for assistance.
To learn about SOM-ETX basic functions, refer to the SOM-ETX
evaluation schematic. This material better explains and clarifies
information about features. Some of the non-standard features,
such as the panel interface, are not usable usless the appropriate
external parts are used.
Parts for EMV/ ESD protection are not included on the SOM-ETX
CPU board.Also note that SOM-ETX signals do not need an
externalPull-upor Pulldown.
If you are creating a backplane for SOM-ETX boards ensure that
you have the appropriate experience with PCI device development.
It is also ideal to be familiar with signal integrity and timing when
laying out your backplane.
Chapter 1 General Information 3
1.2 Specifications
•FlexATXboardsizeandconnectorallocationonedge
•TwoPCI-busandtwoISAexpansionslots
•OneDB-15 VGA connector
•RJ-45Ethernetconnector
•OneDB-9 COM1serialportconnector
•OneDB-9serial port forRS-232/422/485, jumper
selected
•TwoUSBconnectors
•OneLCD connector(upto48bits)
•OneCompactFlash™socket(typeII)
•OneDB-25 printerport connector
•OneFDDconnectorandoneHDDconnector(40-pin)
•One6-pinPS/2KB/mouseconnector(Keyboard/Mouse
split)
•Threephone jackconnectors (Line-in,line-out, Mic-in)
•OneCD-inconnector
•OneTV-outconnector(AVterminal)
•OneAudioCodec
•OneIRDA
Mechanical and Environmental
Power supply : ATX power supply
Max. Power requirements: 5 W
Operating temperature: 0 to 60° C (32 to 140° F )
Board Size: 229 mm x 191mm
Weight:0.35Kg
4SOM-DB4400 User's Manual
1.3 Safety precautions
Warning! Alwayscompletelydisconnect thepower cord from
yourchassis whenever youare working on it. Do
not make connections while the power is on
because sensitive electronic components can be
damagedby the suddenrush ofpower. Only
experiencedelectronicspersonnelshould open
the PC chassis.
Caution! Alwaysground yourself toremove any static
chargebefore touching theCPU card. Modern
electronic devices are very sensitive to static
electric charges. Use a grounding wrist strap at all
times. Place all electronic components on a
static-dissipative surface or in a static-shielded
bag when they are not in the chassis.
Indice
Altri manuali Advantech Scheda madre
Advantech
Advantech POD-6704 Series Manuale utente
Advantech
Advantech AIMB-581 Manuale utente
Advantech
Advantech POD-6552 Manuale di installazione e funzionamento
Advantech
Advantech AIMB-208 Manuale utente
Advantech
Advantech AIMB-762 Manuale di installazione e funzionamento
Advantech
Advantech PCM-3864 Manuale utente
Advantech
Advantech AIMB-788 Manuale di installazione e funzionamento
Advantech
Advantech PCA-6181 Manuale utente
Advantech
Advantech AIMB-288E Manuale utente
Advantech
Advantech PCM-7130 Manuale utente
Advantech
Advantech MIO-3360 Manuale utente
Advantech
Advantech AIMB-217 Manuale utente
Advantech
Advantech SIMB-M22 Manuale di installazione e funzionamento
Advantech
Advantech PCA-6153 Manuale utente
Advantech
Advantech PCM-4386 Manuale utente
Advantech
Advantech PCA-6774 Manuale utente
Advantech
Advantech ASMB-785 Manuale utente
Advantech
Advantech PCA-6187VE-00A2 Manuale utente
Advantech
Advantech AIMB-221 Manuale utente
Advantech
Advantech PCM-3342 Manuale utente
Manuali Scheda madre popolari di altre marche
Telit Wireless Solutions
Telit Wireless Solutions SL869-3DR Manuale utente
Gigabyte
Gigabyte GA-9IVDT Manuale utente
Texas Instruments
Texas Instruments ADS8372EVM Manuale utente
Commell
Commell MS-C73 Manuale utente
IBT Technologies
IBT Technologies MB860 Manuale utente
Nvidia
Nvidia TEGRA DG-04927-001_V01 Manuale utente
