AEM NETWORK SERVICE ASSISTANT Manuale utente

WWW.AEM-TEST.COM

CUSTOMERCARE@AEM-TEST.COM

VER # : 1.0 / PART # : 2201-0011

WWW.AEM-TEST.COM | CUSTOMERCARE@AEM-TEST.COM | VER # : 1.0 / PART # : 2201-0011

NETWORK

SERVICE

ASSISTANT

USER MANUAL

WWW.AEM-TEST.COM

CUSTOMERCARE@AEM-TEST.COM

VER # : 1.0 / PART # : 2201-0011

Contents

NSA

User Manual

Kit Contents

Network Service Assistant (NSA) Features

Settings

Single Pair Ethernet with NSA Remote

Terminated Plug

Fiber Certication Test

Network Test and Cloud

NSA Cable Identication

Certi-Lite with NSA Remote

Multi-Gig and PoE Testing

ii.

iii.

iv.

ii.

iii.

iv.

ii.

iii.

iv.

vi.

ii.

iii.

Length Unit

Sleep Timer

Power O Timer

Display/Audio

Choosing Custom Label

Cloning a Project

Loopback Set Reference

Fiber Test Setup

Ping

Traceroute

Trac Generator

VLAN Discovery

Multi-Gig Validation

BASE-T

PoE Test with PoE enabled Router/

Switches

PoE Load Test

Saving Autotest Data

LiveWiremap

Plot Y-Axis Direction

Autosave Results

Auto Start

Language

System

Device Information

Storage

Battery

Restoring Factory Settings

Factory Menu

Settings Congurations

Date and Time

User Interface

Selecting Cable/Connector

Performing Autotest

Saving Test Data

Set Reference

Selecting Test Limit

Multimode Launch Verication

Fiber Set Reference

Network Test

Fiber Set Reference

Selecting Test Limit

Choosing a Conguration

Selecting Fiber Cable

Fiber Connector

Performing Fiber Autotest

Saving Test Data

Visual Fault Locator (VFL)

Light Source/Power Meter

Fiber Inspection

Powered Fiber

Set Reference

Creating Certi-Lite Project/Prole

Selecting Test Limit

Selecting Cable/Connector

Creating New Label

Performing Autotest

Saving Test Data

Switching Modes under NSA

Setting NVP in cables

Tone Generator

Learn NVP

Length Test

Shield Continuity Test

Creating Project/Prole

Selecting Test Limits

Selecting Cable/Connector

Test Options

Certier/Validator Settings

WWW.AEM-TEST.COM

CUSTOMERCARE@AEM-TEST.COM

VER # : 1.0 / PART # : 2201-0011

vi.

ii.

iii.

ii.

iii.

iv.

Switch Detail

TCP Connect

Network Test

DB Manager

Signal Strength

Selecting Test Limit

Selecting Cable/Conector

Performing Network Autotest

Saving Network Autotest

Wi-Fi

Network Autotest

TestDataProCloud

USB Menu

Test Results Management

Firmware Updates

Upgrading NSA

Copying Test Results to USB

Importing Label List

Creating Custom Label

Exporting and Importing Project

Transfering Test Results from NSA

TestDataPro Test Management

Software

Generating Test Report

Generating Multiple Test Reports

Adding Hierarchy

Meter to Feet

Firmware Update via USB Flash Drive

with OSUpgrade.zip File

Firmware Upgrade using TestDataPro

NSA

User Manual

WWW.AEM-TEST.COM

CUSTOMERCARE@AEM-TEST.COM

VER # : 1.0 / PART # : 2201-0011

Network Service Assistant (NSA) Features

NSA

User Manual

1. Power Button

Kit Contents

Refer to https://aem-test.com/products/network-service-assistant for a full list of kits available

The NSA features a touchscreen based interface. Product features include:

POWER BUTTON

HOME BUTTON

TEST BUTTON

LCD DISPLAY

Powering on : press for 1 second

 press the button once and then select [Power O] on the

touchscreen

Force shutdown : press and hold the power button for 6 seconds or longer.

Note that Force Shutdown may result in loss of recent test data.

Takes you back to home screen on the touchscreen interface.

Starts an AutoTest (Type of Autotest depends on the adapter attached to

the unit.

Resistive touchscreen, with color graphical user interface to navigate the

menu and to view results.

•

WWW.AEM-TEST.COM

CUSTOMERCARE@AEM-TEST.COM

VER # : 1.0 / PART # : 2201-0011

NSA

User Manual

STATUS LED

MICRO USB INPUT

USB TYPE A

RJ4510/100/1G

DC INPUT

TEST ADAPTER

STYLUS

STAND

10.

11.

12.

Red : battery charging (when unit is o)

Amber : battery charging (when unit is on)

Green : battery not charging (when unit is on)

Establishes a USB-based wired link between the NSA unit and a personal

computer.

Test results can be transferred to PC software (TestDataPro) via this

connection.

USB ash drive connection to store test results and for software updates.

For validation testing of cables up to 1G (functionality is built into the basic

NSA kit).

Connection for 5V DC supply (WARNING : Do not connect to any power

supply other than the power adapter supplied by AEM).

A variety of plug and play adapters can be used to change the function of

the NSA modular platform.

Alternative method of using the touchscreen.

Retract stand to place it on a table or any other at surface, freeing you to

perform other tasks while keeping an eye on the screen.

•

WWW.AEM-TEST.COM

CUSTOMERCARE@AEM-TEST.COM

VER # : 1.0 / PART # : 2201-0011

NSA

User Manual

1 Settings

a. Settings Congurations

c. User Interface

b. Date and Time

Users can congure date/time, user interface, certier/

validator settings, language and also access system

information by selecting .

i. Length Unit

ii. Sleep Timer

Select [Date Time].

Set the date and timing using the arrows.

Use the drop down menu to select the timezone.

Enable the checkbox [Sync Time with server] and

select . Note: The timezone will only sync when

NSA detects Internet connectivity.

•

Select [Length Unit].

Select the preferred measurement standard -

Metric (Meter) or US units (Feet).

Select to save the changes.

Select [Sleep Timer].

Select the preferred time duration of inactivity

after which the screen should turn o.

Select to save the changes.

Select [Power O Timer].

•

iii. Power O Timer

WWW.AEM-TEST.COM

CUSTOMERCARE@AEM-TEST.COM

VER # : 1.0 / PART # : 2201-0011

Note : The [Power O Timer] function is only available

when the NSA is in battery mode. It is not available

when the unit is attached to a power supply.

Select the preferred time duration of inactivity after

which the NSA should power o.

Select to save the setting.

•

iv. Display/Audio

i. Plot Y-Axis Direction

ii. Autosave Results

iii. Auto Start

•

Select [Display/Audio].

Adjust the display brightness or audio volume by

pressing [+] or [-]. To mute, continue to press [-]

until it shows [Mute]

Select to save the setting.

Select on the home screen, then [Certier/

Validator Settings] and then [Plot Y-Axis Direction].

Select [Up] or [Down].

Select to save the changes made to the settings.

Select [AutoSave Result].

Select [Yes] or [No]. If [Yes], after Autotest, the

test results will be automatically saved using the

available label scheme.

Select [Autosave with PASS result only] to

autosave the pass results only.

Select to save the settings.

Select [Auto Start].

Select [Yes] or [No]. If [Yes], NSA willl automatically

start the Autotest when the cable under test is

connected to the NSA. When [Do Autotest if

Wiremap Failed] is enabled, in the event that any

of the 4 pairs falls the wiremap, an Autotest will be

trigereed instead of cable diagnostic

Select [Autosave with PASS result only] to

autosave the pass results only.

Select to save the settings.

d. Certier/Validator Settings

[Autosave Result], when set to [YES] will save the

test results according to the next available label name.

Auto Start when enabled will automatically start the

Autotest when a connection is detected in any of the test

ports.

NSA

User Manual

WWW.AEM-TEST.COM

CUSTOMERCARE@AEM-TEST.COM

VER # : 1.0 / PART # : 2201-0011

NSA

User Manual

e. Language

Select [Language].

Select one of the languages available and then to

save the settings.

Select to restart the device or to restart later.

•

The screen will show the NSA model, serial

number, software, hardware, FPGA version, adapter

information and test count.

Select to exit the screen.

Note: Test count is the number of insertion cycles

for the adapter port.

Select [Settings] on the home screen, then [System]

and them [Battery].

User will be brought to a screen showing the

charging status, time remaining, battery voltage,

current battery status and input voltage.

Select to exit the screen.

[Reset Battery Gauge] recalibrate discrepancies in

the battery reading. Use this feature only when the

battery percentage is uctuating.

Note: i. Ensure that the battery is fully charged 100%

before doing the reset. ii. Select [Reset Battery

Gauge]. iii. NSA will apply the changes and restart

the device. AEM recommends to charge the battery

overnight.

f. System

h. Storage

i. Battery

g. Device Information

Select [System] to gain access to information relating

to the device, storage, battery status as well as to

restore the NSA to factory settings.

[Storage] displays the capacity and used and free

space on the NSA.

Click [Settings] on the home screen, then [System]

and then [Device Information].

WWW.AEM-TEST.COM

CUSTOMERCARE@AEM-TEST.COM

VER # : 1.0 / PART # : 2201-0011

NSA

User Manual

j. Restoring Factory Settings k. Factory Menu

Select [Settings] on the home screen, then [System]

and then [Restore Factory Settings].

On the dialog box, select to restore the device to

default factory settings. The device will restart.

[Factory Menu] is for manufacturer’s internal use only.

Access to this function is not available to users.

•

2 Certi-Lite with NSA Remote

NSA Cable Certi-Lite is also known as Single Ended Autotest. This feature uses an AD-NSA adapter and the remote

end is terminated by an NSA remote with ID 1 to 8. Certi-Lite supports comprehensive features and measurements

such as LiveWiremap, Touch TDR, Length, Delay, Return Loss, NEXT and many other funtions. To use Cable Certi-

Lite, attach an AD-NSA adapter. NSA will automatically detect the adapter.

NSA Remote with dierent IDs can be used to identify cables that are mixed up, no label or which are mislabeled.

When an NSA Remote is connected to NSA, the correct ID for it will be automatically detected and displayed.

WWW.AEM-TEST.COM

CUSTOMERCARE@AEM-TEST.COM

VER # : 1.0 / PART # : 2201-0011

NSA

User Manual

It is important to perform a set

reference using NSA Remote

IDs 1 to 8 before using it for the

Autotest when the AD-NSA

adapter is attached to the NSA

for the rst time. Failure to do

so will result in incorrect DC

resistance measurements.

To perform set reference,

attach an AD-NSA adapter

to the NSA and one of the 8

NSA Remote to the Cert-Lite

Channel port of the AD-NSA

adapter. Do set reference to all 8 NSA Remote units

one by one before using.

Note: Set reference will already have been performed

before shipping the product, therefore it is not

necessary to perform it again when the product is

received.

a. Set Reference b. Creating Certi-Lite Project/Prole

On the NSA main screen, select [Cable Certi-Lite].

NSA will identify the NSA Remote ID attached - ie.,

Remote #5. Select [Expert Tools].

Select [Set Reference].

The dialog box [Connect NSA Remote to the cable

test port of the AD-NSA adapter] will appear.

Select .

Note: Repeat the set reference process using all the

8 NSA Remote units.

Select [Project]/[Prole] on the home screen to

create/edit a project. Once a project is selected,

subsequent Autotest results will be saved there.

Select [Project Manager] to choose or create a

dierent project or to delete an existing project.

Select [Edit] to edit project details.

NSA supports customer workows through project

and prole descriptions. [Project] is an identier of

the customer site/location, while [Prole] refers to

specic test congurations.

•

Choose from one of the already dened projects or

create a new project by selecting [Add New].

Key in an appropriate name and select to save the

project.

After selecting the project name, a dialog box will

appear. Select to see the various proles:

[Certi-Lite] for NSA Remote

[Validation] for Multi-Gig tests

[Certication] for Copper Cable Certication

[Single Pair Ethernet] for Copper Cable

Certication with less than 4 pairs

[MM Fiber] for Multimode Fiber

[SM Fiber] for Singlemode Fiber

[Network Validation] for Network Autotest

[Coax] for Coax Certication

Indice

Altri manuali AEM Apparecchiature di prova

AEM

AEM TESTPRO CV100 Manuale utente

Manuali Apparecchiature di prova popolari di altre marche

SMART

SMART KANAAD SBT XTREME 3G Series Manuale utente

Agilent Technologies

Agilent Technologies BERT Serial Manuale utente

Agilent Technologies

Agilent Technologies N3280A Manuale utente

Vernier

Vernier Go Direct Voltage Manuale utente

Lifeloc

Lifeloc R.A.D.A.R. Manuale utente

Fluke

Fluke T5-600 Istruzioni per l'uso e l'installazione

Mercury

Mercury TSL01 Manuale utente

MAHA

MAHA MBT Series Manuale utente

Fuji Electric

Fuji Electric P-61 Manuale utente

ETC

ETC SealerAtor Manuale utente

Skyfine

Skyfine ETHYWAY V2 Manuale utente

Appion

Appion G5 Twin Manuale utente

PCB Piezotronics

PCB Piezotronics 8159-0112A Manuale utente

BW Technologies

BW Technologies MicroDock II Manuale utente

Sun Nuclear

Sun Nuclear 1027 Manuale utente

Biomark

Biomark HPR LITE READER Manuale utente

Hioki

Hioki 3169-20 Manuale utente

Ashcroft

Ashcroft ATE-100 Manuale utente