Afinia 3D H800+ Manuale utente

H800+ 3D Printer

Version 1.5

Afinia H800+ 3D Printer User’s Manual

TABLE OF CONTENTS

Safety Precautions .................................................................................................................. 5

Protecting the Printer .............................................................................................................. 5

Overview ................................................................................................................................... 6

Unpacking the Afinia H800+ 3D Printer ............................................................................................. 8

The Print Head ................................................................................................................................... 9

The Control Button .......................................................................................................................... 9

nstalling the Afinia H800+ 3D Printer .................................................................................. 10

Driver and Software In tallation ...................................................................................................... 10

In talling the Printer ........................................................................................................................ 10

Loading the Filament ....................................................................................................................... 11

Getting Ready to Print ........................................................................................................... 12

Starting the Afinia 3D Program ........................................................................................................ 12

Initializing the Printer ...................................................................................................................... 12

Preparing the Platform .................................................................................................................... 13

Leveling the Print Platform .............................................................................................................. 14

Platform Calibration ........................................................................................................................ 15

Automatic Platform Calibration ....................................................................................................... 15

Manual Platform Calibration ........................................................................................................... 16

Calibrating the Nozzle Height .......................................................................................................... 17

Other Maintenance Option ............................................................................................................ 18

Printing with the H800+ 3D Printer ...................................................................................... 20

Loading a 3D Model ......................................................................................................................... 20

View Option ................................................................................................................................... 22

Model tran formation .................................................................................................................... 22

Placing Model onto the Build Platform .......................................................................................... 24

Print Setup Option ......................................................................................................................... 25

Print Setting ................................................................................................................................... 25

Part Setting .................................................................................................................................... 25

Printing ............................................................................................................................................ 29

Print Option ................................................................................................................................... 29

Save as Project ...................................................................................................................... 31

Model Removal ...................................................................................................................... 32

Removing Support Material ............................................................................................................ 33

Maintenance ........................................................................................................................... 34

Changing the Filament..................................................................................................................... 34

Cleaning the Nozzle ......................................................................................................................... 35

Removing / Changing the Nozzle ..................................................................................................... 35

Cleaning the Extruder Gear ............................................................................................................. 36

Cleaning the Platform ...................................................................................................................... 37

Lubrication of Extruder Rail ........................................................................................................... 37

Changing the HEPA Filter ................................................................................................................. 37

Spare part ...................................................................................................................................... 37

Vertical Calibration .......................................................................................................................... 37

Tips & Tricks .......................................................................................................................... 39

Status ndicator ...................................................................................................................... 41

Changing Languages ............................................................................................................ 41

Updating the Printer ROM ..................................................................................................... 42

Troubleshooting ..................................................................................................................... 42

Specifications ........................................................................................................................ 45

Technical Support .................................................................................................................. 46

Acronyms and Jargon ........................................................................................................... 46

Afinia H800+ 3D Printer User’s Manual

Afinia 1-Year imited Warranty

Below is the one-year limited warranty included with this Afinia product. Afinia prides itself on its outstanding

product line and its technical support. If for some reason, your product fails, Afinia, a division of Microboards

Technology, C, stands behind its warranties and assures you the best service possible in a quick and timely

manner.

Afinia warrants to the original purchaser that this product is free from defects in material and workmanship.

Afinia will for one year, at its option, repair or replace at no charge for parts and labor from the date you

purchased the product from an authorized Afinia reseller. Nozzles and Cell/Perf Boards are warranted for

ninety (90) days.

• Warranty registration must be completed within 30 days of receipt of the product in order to validate the

warranty.

• Afinia, a division of Microboards Technology, C, reserves the right to determine the validity of all warranty

claims.

• Warranty is void if the product serial number has been altered or removed.

• Warranty is void if the product has been misused or damaged or if evidence is present that the product was

altered, modified, or serviced by unauthorized service people.

The above stated warranty is exclusive and replaces all other warranties, express of implied, including those of

merchantability and fitness for a particular purpose. Afinia, a division of Microboards Technology, C, will not

be liable for any other damages or loss, including incidental or consequential damages and loss of profits or

revenues from whatever cause, including breach of warranty or negligence.

This product has been thoroughly tested and inspected at the factory prior to shipment. Nevertheless, inspect

your product completely for any damage or loss of parts that may have occurred during shipment. Notify the

delivering carrier promptly if damage claims are to be filed.

Afinia reserves the right to modify or update its product without obligation to replace any equipment delivered

prior to any such change.

To register your warranty, please visit www.afinia.com/register

FCC D: 026-H800+

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)

this device may not cause harmful interference, and (2) this device must accept any interference received,

including interference that may cause undesired operation.

Changes or modifications not expressly approved by the party responsible for compliance could void the

user's authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device,

pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against

harmful interference in a residential installation. This equipment generates, uses, and can radiate radio

frequency energy and, if not installed and used in accordance with the instructions, may cause harmful

interference to radio communications. However, there is no guarantee that interference will not occur in a

particular installation. If this equipment does cause harmful interference to radio or television reception, which

can be determined by turning the equipment off and on, the user is encouraged to try to correct the

interference by one or more of the following measures:

•

Reorient or relocate the receiving antenna.

•

Increase the separation between the equipment and receiver.

•

Connect the equipment into an outlet on a circuit different from that to which the receiver

is connected.

•

Consult the dealer or an experienced radio/TV technician for help.

FCC ID:O26-H800B

Afinia H800+ 3D Printer User’s Manual

Safety Precautions

Please read this section carefully before using the printer.

• The printer can only be used with the power adapters supplied by this company, or the

product may be damaged, with a risk of fire.

• To avoid burning or model deformation, do not touch the model, nozzle, or the platform by

hand or any other part of the body while the printer is working or immediately after it has

finished printing.

• Protective glasses should always be worn when removing support material, especially

P A.

• There is a slight smell from ABS when it is being extruded. A well-ventilated room is

recommended; however when printing, keep the printer away from any drafts as this can

affect the warping of ABS prints.

• When ABS is burnt it releases toxic fumes. Never set the nozzle temperature high enough

to burn the material.

The following classifications are used in this manual:

CAUTION: Indicates a potentially hazardous situation which, if not avoided, may

result in minor or moderate injury.

WARNING: Indicates a potentially hazardous situation which, if not avoided, may

result in serious injury.

G OVES: When performing certain maintenance procedures, the machine may

be hot and gloves are required to avoid burns.

SAFETY G ASSES: Wear safety glasses to avoid injury to your eyes.

Protecting the Printer

• The printer must not be exposed to water or rain, or damage may occur.

• Do not shut down the Afinia H800+ 3D System or pull out the USB cable when loading a

digital model or the model data may be lost.

• When using the “Extrude” function, keep at least 50mm between the nozzle and the

platform. If too close, the nozzle may get blocked.

• The printer is designed to work properly at an ambient temperature of between 60°F and

85°F and humidity of between 20% and 50%. Operating outside these limits may result in

low quality models.

Afinia H800+ 3D Printer User’s Manual

Overview

The Afinia H800+ was designed specifically for educators and professionals looking for fast,

hassle-free 3D printing with exceptional quality. The Afinia H800+ boasts a host of features, from

Smart Support, user-friendly software and automatic leveling, to paper-thin layer HD resolution

with a heated build platform. Everything about this printer is geared towards creating high

standard professional 3D models.

Print a working bearing in one design, make a part for a dishwasher or just unleash your creativity

and bring your designs to life with your new Afinia H800+.

The Afinia 3D software sends the print data from a Mac or PC to the Printer over a single USB

cable. The Extruder delivers the Filament from the Spool into the Nozzle, which heats the filament

to printing temperature and deposits it on the Platform.

100 Micron

High

Definition Detail

arge 10” x 8” x 8”

Build Platform

HEPA Air

Filtration

System

Fully Automated

Calibration

Easy Filament

Replacement

Smart Support

Technology

One

Button Filament

Change

out

51dB

Quiet

and Fast!

Afinia H800+ 3D Printer User’s Manual

The Afinia H800+ with HEPA filter is packed with advanced technologies in a stylish and robust

design.

Afinia H800+ 3D Printer User’s Manual

Unpacking the Afinia H800+ 3D Printer

The Afinia H800+ 3D Printer weighs over 40 pounds and should be

team-lifted!

Remove the power cord and 4 perf boards from the top foam piece.

Remove top foam from the box. ift the foam ring from around the printer.

With two people, carefully lift the Printer from the box.

ift the foam sheet below the printer and remove the Accessory Pack,

Power Supply, Putty Knife, and Snipping Pliers.

ift the top cover and carefully lift out the foam above the platform.

Open the front door and carefully remove the two pieces of foam from

under the platform. Tip each foam piece back until it is lying flat, then

turn the foam counter-clockwise until the left end of the foam is through

the door.

Use the snipping pliers to carefully cut the 6 labeled

retaining strap loops from around the Print Head rails

near the top of the printer.

Cut only the straps!

Next, check the Accessories:

• Reel of Filament (1, Natural/White)

• Power Supply

• Power Cable

• USB Cable

• 2 Flex Boards

• 2 Perf Boards

• Extra Nozzle

• Nozzle Wrench

• Hex Wrenches

• Putty Knife

• Snipping Pliers

Afinia H800+ 3D Printer User’s Manual

The Print Head

The Print Head is held in place using three guide magnets in the extruder bracket.

The Print Head is already installed in the Printer. You do not need to do any assembly.

The Control Buttons

You can do a lot with your Afinia H800+ by using the Control Buttons, so it follows your every

command.

You also use the Afinia software to control the Afinia H800+.

Filament Button

Power Button Pause Button

Afinia H800+ 3D Printer User’s Manual

nstalling the Afinia H800+ 3D Printer

You will need the USB Cable, Power Supply and Cable, and Filament Spool to complete the Afinia

H800+ 3D Printer installation.

Driver and Software nstallation

Mac

Insert the Installation Disc into your Mac. Open the disc, go into the Mac folder, and

double-click Afinia Mac Setup.pkg. Follow the prompts through the installation. The drivers

will be added and the Afinia software will be installed to the Applications folder.

Windows

Insert the Installation Disc into your PC. If the installer does not launch automatically, start the

Afinia 3D Printer setup.exe file in the PC directory on the installation disc.

Note: This installs the Afinia 3D Printer software, the Afinia 3D Printer drivers, and the Afinia

3D Printer sample files into your Program files\Afinia\Afinia 3D Printer folder.

Follow the instructions in the Installer to be sure the drivers and software are all in place

before attempting to use the Printer. The instructions below will follow the same order as those

in the Installer.

nstalling the Printer

Connect the power adapter as shown with the flat side out and turn

on the power switch.

ong Press the Power button on the control panel to initialize the

printer.

Connect the printer to your computer using the supplied USB cable.

The Printer will be recognized and automatically installed when it is connected to

your PC or Mac.

U B connection

Altri manuali per H800+

Indice

Altri manuali Afinia 3D Stampante 3D

Afinia 3D

Afinia 3D H800+ Manuale utente

Afinia 3D

Afinia 3D H400+ Manuale utente

Afinia 3D

Afinia 3D H440 Manuale utente

Manuali Stampante 3D popolari di altre marche

Ultimaker

Ultimaker S5 Material Station Manuale utente

EcubMaker

EcubMaker TOYDIY Manuale utente

AnyCubic

AnyCubic Kossel Plus Manuale utente

ReDeTec

ReDeTec ProtoCycler Manuale utente

Kywoo3D

Kywoo3D Tycoon IDEX Manuale utente

CraftBot

CraftBot PLUS PRO Manuale utente

3DGence

3DGence INDUSTRY F340 Manuale utente

HP Jet Fusion 4200 Istruzioni operative

Rokit

Rokit AEP Series Manuale utente

AnkerMake

AnkerMake M5 Manuale utente

DIYElectronics

DIYElectronics PRUSA I3 Istruzioni per il montaggio

Ackuretta

Ackuretta FreeShape 120 Manuale utente

LONGER

LONGER LK5Pro Manuale utente

Stratasys

Stratasys J850 Manuale utente

MakerBot

MakerBot Replicator Manuale utente

Stratasys

Stratasys FDM Vantage Series Manuale utente

ZYYX

ZYYX Pro II Manuale utente

FLASHFORGE 3D PRINTER

FLASHFORGE 3D PRINTER Creator Guida utente