Agilent Technologies Infiniium Manuale utente

HP/Agilent/Keysight MSO8104A Manual

Get Pricing & Availability at

ApexWaves.com

Call Today: 1-800-915-6216

Email: sales@apexwaves.com

https://www.apexwaves.com/oscilloscopes/keysight-technologies/8000-series/MSO8104A

Agilent Technologies

Infiniium

User’s Quick Start Guide

Publication number D8104-97003

January 2006

Infiniium Oscilloscopes

In This Book

This book gives you the information you need to begin using the Infiniium

Oscilloscopes. It contains four chapters:

Setting up the Oscilloscope Chapter 1 contains inspection, power

requirements, air flow, and setup information.

Working in Comfort Chapter 2 contains recommendations for working

comfortably and safely while operating the Infiniium Oscilloscope.

Using the Oscilloscope Chapter 3 gives an overview of the front panel and

the graphical user interface, and tells you how to perform basic operations with

the oscilloscope.

Using the Built-In Information System Chapter 4 describes the built-in

information system contents and navigation. The built-in information system

contains all of the information that is generally found in a User’s Guide.

• For detailed information on how the oscilloscope makes measurements and

how to use the oscilloscope, see the built-in information system in the

oscilloscope.

• For information on programming the oscilloscope using a computer with a

GPIB interface card or LAN interface card, see the Oscilloscopes

Programmer’s Reference for your model number oscilloscope found in the

Infiniium Information System.

• For information on testing and servicing the oscilloscope, see the Service

Guide manual for your model number oscilloscope found in Infiniium

Information System.

Contents

Contents-1

1 Setting Up the Oscilloscope

To inspect package contents 1-3

To inspect options and accessories 1-6

To connect power 1-11

To connect the mouse, the keyboard, a LAN cable, a USB device, a printer,

and a GPIB cable 1-15

To connect oscilloscope probes 1-17

To connect SMA Cables 1-20

To connect the digital probe 1-21

Digital probe lead set 1-22

To tilt the oscilloscope upward for easier viewing 1-26

To turn on the oscilloscope 1-27

To turn off the oscilloscope 1-28

To verify basic operation for the 80000B series oscilloscope 1-29

To verify basic operation for the 8000A series oscilloscope 1-31

Installing application programs on Infiniium 1-33

Changing Windows System Settings 1-34

To clean the oscilloscope 1-35

2 Working in Comfort

About Repetitive Strain Injury 2-3

Mice and Other Input Devices 2-4

3 Using the Oscilloscope

Front Panel 3-4

Acquisition and General Controls 3-5

Horizontal Controls 3-5

Trigger Controls 3-5

Vertical Controls 3-5

Marker and Measurement Controls 3-6

To set the oscilloscope to a known starting condition 3-7

To start and stop waveform acquisition 3-8

To clear the waveform display 3-9

To turn an analog channel on or off 3-10

To turn digital channels on or off 3-11

To change input impedance and input coupling 3-12

To adjust analog channel’s vertical scale and offset 3-13

To adjust digital channel’s vertical size and offset 3-14

To adjust sweep speed and horizontal position 3-15

To magnify a part of the waveform using delayed sweep 3-16

To set the oscilloscope to trigger on an edge 3-17

To use the markers 3-19

To use the quick measurements 3-20

To reinitialize the oscilloscope 3-21

Graphical User Interface 3-23

To perform basic user interface operations 3-30

Contents

Contents-2

To select a command from the menu bar 3-33

To select a command from a context-sensitive menu 3-34

To start and stop waveform acquisition 3-37

To clear the waveform display 3-38

To print the screen 3-39

To change waveform brightness 3-40

To turn a channel on or off 3-41

To adjust the vertical offset 3-42

To adjust vertical scaling 3-44

To access the channel setup 3-45

To set the horizontal reference point 3-46

To adjust sweep speed 3-47

To adjust horizontal position 3-48

To access the horizontal setup 3-49

To zoom on a section of the waveform 3-50

To move the markers using the graphical interface 3-52

To make a measurement on a waveform 3-54

To access the trigger setup 3-56

To set an edge trigger 3-57

To set dialog box preferences 3-58

To recover your Infiniium hard disk 3-61

To calibrate the touch screen 3-64

To enable or disable the touch screen 3-65

4 Using the Built-In Information System

To access the information system 4-4

Topic Types 4-7

To navigate through the information system 4-9

To access context-sensitive information 4-10

Setting Up the Oscilloscope

1-2

Setting Up the Oscilloscope

This chapter shows you how to set up your Infiniium oscilloscope,

connect power and accessories, and verify general operation.

Setting Up the Oscilloscope

To inspect package contents

1-3

To inspect package contents

❏Inspect the shipping container for damage.

Keep a damaged shipping container or cushioning material until you have

inspected the contents of the shipment for completeness and have checked the

oscilloscope mechanically and electrically.

❏Verify that you received the following items in the Infiniium Oscilloscope

packaging.

• Infiniium Oscilloscope

•Mouse

• Touchscreen Stylus

• 10073C 10:1 10 MΩpassive probes (one for each analog channel on 8000A

series models only)

• Digital Probe Kit (MSO models only)

• Calibration Cable (80000B series models only)

• SMA to Precision BNC Adaptors (80000B series models only)

• Accessory Pouch

• Front Panel Cover

• Keyboard

•Powercord

• Probe De-skew and Performance Verification Kit (80000B series models

only)

•User’s Quick Start Guide

See the following figures for your model of Infiniium Oscilloscope. (See table

1-4 for the power cord.) If anything is missing, contact your nearest Agilent

Technologies Sales Office. If the shipment was damaged, contact the carrier,

then contact the nearest Agilent Technologies Sales Office.

❏Inspect the oscilloscope.

• If there is mechanical damage or a defect, or if the oscilloscope does not

operate properly or does not pass performance tests, notify your Agilent

Technologies Sales Office.

• If the shipping container is damaged, or the cushioning materials show signs

of stress, notify the carrier and your Agilent Technologies Sales Office. Keep

the shipping materials for the carrier’s inspection. The Agilent Technologies

Sales Office will arrange for repair or replacement at Agilent’s option without

waiting for claim settlement.

Setting Up the Oscilloscope

To inspect package contents

1-4

Figure 1-1

Package Contents for the 80000B Series Infiniium Oscilloscopes

Infiniium Oscilloscope

with Accessory Pouch

User’s Quick Start Guide

Mouse

Keyboard

Calibration Cable

SMA to

Precision

BNC

Adaptors

(2)

Probe Deskew and

Performance

Verification Kit

Touchscreen Stylus

Front Panel

Cover

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Agilent Technologies Apparecchiature di prova

Agilent Technologies

Agilent Technologies 93000 SOC Series Guida all'installazione

Agilent Technologies

Agilent Technologies 3000 Series Manuale

Agilent Technologies

Agilent Technologies Agilent 34980A Manuale utente

Agilent Technologies

Agilent Technologies E5022A Manuale utente

Agilent Technologies

Agilent Technologies E1852A Manuale utente

Agilent Technologies

Agilent Technologies 8960 Manuale utente

Agilent Technologies

Agilent Technologies N4419B Manuale utente

Agilent Technologies

Agilent Technologies InfiniiVision 7000B Series Manuale utente

Agilent Technologies

Agilent Technologies ENA Series Manuale utente

Agilent Technologies

Agilent Technologies 3000 Series Manuale

Agilent Technologies

Agilent Technologies InfiniiVision MSO6012A Manuale utente

Agilent Technologies

Agilent Technologies PHD-4 Manuale utente

Agilent Technologies

Agilent Technologies 8453 Schema elettrico

Agilent Technologies

Agilent Technologies InfiniiVision 6000 Series Manuale utente

Agilent Technologies

Agilent Technologies 3070 Series Guida utente

Agilent Technologies

Agilent Technologies 85032F Manuale

Agilent Technologies

Agilent Technologies U1602A Manuale

Agilent Technologies

Agilent Technologies auroraSonata Manuale utente

Agilent Technologies

Agilent Technologies U4002A Manuale utente

Agilent Technologies

Agilent Technologies 3000 Series Manuale utente

Agilent Technologies

Agilent Technologies 5DX II Series Manuale utente

Agilent Technologies

Agilent Technologies InfiniiVision MSO6102A Manuale utente

Agilent Technologies

Agilent Technologies InfiniiVision 6000 Series Manuale utente

Agilent Technologies

Agilent Technologies 8924C Manuale di servizio

Manuali Apparecchiature di prova popolari di altre marche

SMART

SMART KANAAD SBT XTREME 3G Series Manuale utente

Vernier

Vernier Go Direct Voltage Manuale utente

Lifeloc

Lifeloc R.A.D.A.R. Manuale utente

Fluke

Fluke T5-600 Istruzioni per l'uso e l'installazione

Mercury

Mercury TSL01 Manuale utente

MAHA

MAHA MBT Series Manuale utente

Fuji Electric

Fuji Electric P-61 Manuale utente

ETC

ETC SealerAtor Manuale utente

Skyfine

Skyfine ETHYWAY V2 Manuale utente

Appion

Appion G5 Twin Manuale utente

PCB Piezotronics

PCB Piezotronics 8159-0112A Manuale utente

BW Technologies

BW Technologies MicroDock II Manuale utente

Sun Nuclear

Sun Nuclear 1027 Manuale utente

Biomark

Biomark HPR LITE READER Manuale utente

Hioki

Hioki 3169-20 Manuale utente

Ashcroft

Ashcroft ATE-100 Manuale utente

Rohde & Schwarz

Rohde & Schwarz RTA4000 Manuale utente

Ritmix

Ritmix RAT-701 Manuale utente