Agilent Technologies U1602B Manuale
Agilent Technologies
Agilent U1602B and
U1604B Handheld Digital
Oscilloscopes
User’s and Service Guide
ii Agilent U1602B/U1604B User’s and Service Guide
Notices
© Agilent Technologies, Inc. 2006–2013
No part of this manual may be reproduced in
any form or by any means (including elec-
tronic storage and retrieval or translation
into a foreign language) without prior agree-
ment and written consent from Agilent
Technologies, Inc. as governed by United
States and international copyright laws.
Manual Part Number
U1602-90023
Edition
Tenth Edition, May 17, 2013
Printed in Malaysia
Agilent Technologies, Inc.
3501 Stevens Creek Blvd.
Santa Clara, CA 95052 USA
Warranty
The material contained in this docu-
ment is provided “as is,” and is sub-
ject to being changed, without notice,
in future editions. Further, to the max-
imum extent permitted by applicable
law, Agilent disclaims all warranties,
either express or implied, with regard
to this manual and any information
contained herein, including but not
limited to the implied warranties of
merchantability and fitness for a par-
ticular purpose. Agilent shall not be
liable for errors or for incidental or
consequential damages in connec-
tion with the furnishing, use, or per-
formance of this document or of any
information contained herein. Should
Agilent and the user have a separate
written agreement with warranty
terms covering the material in this
document that conflict with these
terms, the warranty terms in the sep-
arate agreement shall control.
Technology Licenses
The hardware and/or software described in
this document are furnished under a license
and may be used or copied only in accor-
dance with the terms of such license.
Restricted Rights Legend
U.S. Government Restricted Rights. Soft-
ware and technical data rights granted to
the federal government include only those
rights customarily provided to end user cus-
tomers. Agilent provides this customary
commercial license in Software and techni-
cal data pursuant to FAR 12.211 (Technical
Data) and 12.212 (Computer Software) and,
for the Department of Defense, DFARS
252.227-7015 (Technical Data - Commercial
Items) and DFARS 227.7202-3 (Rights in
Commercial Computer Software or Com-
puter Software Documentation).
Safety Notices
CAUTION
A CAUTION notice denotes a haz-
ard. It calls attention to an operat-
ing procedure, practice, or the like
that, if not correctly performed or
adhered to, could result in damage
to the product or loss of important
data. Do not proceed beyond a
CAUTION notice until the indicated
conditions are fully understood and
met.
WARNING
A WARNING notice denotes a
hazard. It calls attention to an
operating procedure, practice, or
the like that, if not correctly per-
formed or adhered to, could result
in personal injury or death. Do not
proceed beyond a WARNING
notice until the indicated condi-
tions are fully understood and
met.
Microsoft ®is a U.S. registered trademark
of Microsoft Corporation.
Agilent U1602B/U1604B User’s and Service Guide iii
Notices
No part of this manual may be reproduced in any form or by any means
(including electronic storage and retrieval or translation into a foreign
language) without prior agreement and written consent from Agilent
Technologies, Inc. as governed by United States and international
copyright laws.
The information contained in this document is subject to change without
notice.
To the extent allowed by local law, Agilent makes no warranty of any kind
with regard to this material, including, but not limited to, the implied
warranties of merchantability and fitness for a particular purpose.
To the extent allowed by local law, Agilent shall not be liable for errors
contained herein or for incidental or consequential damages in connection
with the furnishing, performance, or use of this material.
Certification
Agilent Technologies certifies that this product met its published
specifications at the time of shipment. Agilent further certifies that its
calibration measurements are traceable to the United States National
Institute of Standard and Technology (formerly National Bureau of
Standards), to the extent allowed by that organization’s calibration facility,
and to the calibration facilities of other International Standards
Organization members.
iv Agilent U1602B/U1604B User’s and Service Guide
General Warranty
The material contained in this document is provided “as is,” and is subject
to being changed, without notice, in future editions. Further, to the
maximum extent permitted by applicable law, Agilent disclaims all
warranties, either express or implied with regard to this manual and any
information contained herein, including but not limited to the implied
warranties of merchantability and fitness for a particular purpose. Agilent
shall not be liable for errors or for incidental or consequential damages in
connection with the furnishing, use, or performance of this document or
any information contained herein. Should Agilent and the user have a
separate written agreement with warranty terms covering the material in
this document that conflict with these terms, the warranty terms in the
separate agreement will control. Duration and conditions of warranty for
this product may be superseded when the product is integrated into
(becomes a part of) other Agilent products. During the warranty period,
Agilent will, at its option, either repair or replace products which prove to
be defective. The warranty period begins on the date of delivery or on the
date of installation if installed by Agilent.
Warranty Service
For warranty service or repair, this product must be returned to a service
facility designated by Agilent. For products returned to Agilent for
warranty service, the Buyer shall prepay shipping charges to Agilent and
Agilent shall pay shipping charges to return the product to the Buyer.
However, the Buyer shall pay all shipping charges, duties, and taxes for
products returned to Agilent from another country.
Agilent U1602B/U1604B User’s and Service Guide v
Limitation of Warranty
The foregoing warranty shall not apply to defects resulting from improper
or inadequate maintenance by the Buyer, Buyer-supplied products or
interfacing, unauthorized modification or misuse, operation outside of the
environmental specifications for the product, or improper site preparation
or maintenance.
The design and implementation of any circuit on this product is the sole
responsibility of the Buyer. Agilent does not warrant the Buyer’s circuitry
or malfunctions of Agilent products that result from the Buyer’s circuitry.
In addition, Agilent does not warrant any damage that occurs as a result of
the Buyer’s circuit or any defects that result from Buyer-supplied products.
To the extent allowed by local law, Agilent makes no other warranty,
expressed or implied, whether written or oral with respect to this product
and specifically disclaims any implied warranty or condition of
merchantability, fitness for a particular purpose or satisfactory quality.
Exclusive Remedies
To the extent allowed by local law, the remedies provided herein are the
Buyer’s sole and exclusive remedies. Agilent shall not be liable for any
direct, indirect, special, incidental, or consequential damages (including
lost profit or data), whether based on warranty, contract, tort, or any other
legal theory.
vi Agilent U1602B/U1604B User’s and Service Guide
Safety Summary
The following general safety precautions must be observed during all
phases of operation of this instrument. Failure to comply with these
precautions or with specific warnings elsewhere in this manual violates
safety standards of design, manufacture, and intended use of the
instrument. Agilent Technologies, Inc. assumes no liability for the
customer’s failure to comply with these requirements.
Safety Notices
WARNING
A WARNING calls attention to a procedure, practice or the like, which, if
not correctly performed or adhered to, could result in injury or loss of
life. Do not proceed beyond a WARNING until the indicated conditions
are fully understood and met.
CAUTION
A CAUTION notice denotes a hazard. It calls attention to an operating
procedure, practice, or the like that, if not correctly performed or adhered
to, could result in damage to the product or loss of important data. Do not
proceed beyond a CAUTION notice until the indicated conditions are fully
understood and met.
Agilent U1602B/U1604B User’s and Service Guide vii
Safety Symbols
The following symbols on the instrument and in the documentation
indicate precautions which must be taken to maintain safe operation of
the instrument.
Earth ground terminal
Equipotentiality
Caution, risk of electric shock
The Instruction Documentation Symbol. The product is marked with
this symbol when it is necessary for the user to refer to the instruc-
tions in the supplied documentation.
Direct and alternating current
Direct current
Equipment protected throughout by DOUBLE INSULATION or
REINFORCED INSULATION
Caution, hot surface
CAT III Measurement category III are measurements performed in the
building installation
viii Agilent U1602B/U1604B User’s and Service Guide
Regulatory Markings
The CE mark is a registered trademark of the European
Community.This CE mark shows that the product complies with all
the relevant European Legal Directives. If it was accompanied by a
year, it indicates the year the design was approved. This ISM device
complies with Canadian ICES-001.
The CSA mark is a registered trademark of the Canadian Standards
Association.
The C-tick mark is a registered trademark of the Spectrum
Management Agency of Australia. This signifies compliance with
the Australia EMC Framework regulations under the terms of the
Radio Communication Act of 1992.
Agilent U1602B/U1604B User’s and Service Guide ix
General Safety Information
The following general safety precautions must be observed during all
phases of operation, service and repair of this instrument. Failure to
comply with these precautions or with specific warnings elsewhere in this
manual violates safety standards of design, manufacture and intended use
of the instrument. Agilent Technologies assumes no liability for the
customer’s failure to comply with these requirements.
WARNING
• All DMM/Scope COM are internally connected. Only connect
DMM/Scope COM to same potential.
• Remove all unused scope probes and test leads.
WARNING
• Do not connect DMM test leads and scope probes at the same time.
• Disconnect scope probe from instrument before using DMM
functions.
• Disconnect DMM test leads from instrument before using scope
functions.
WARNING
To avoid electrical shock or fire during battery replacement:
• Disconnect test leads, probes and power supply before opening case
or battery door.
• Do not operate the instrument with battery cover open.
• Use only specified insulated probes and leads.
• Use only U1571A, 7.2 V Ni-MH battery pack supplied by
manufacturer.
x Agilent U1602B/U1604B User’s and Service Guide
WARNING
Prevention of fire or injury:
• Use only the designated AC adapter and test leads supplied with the
instrument.
• Observe all ratings and markings on the instrument before
connecting to the instrument.
• When performing measurement, ensure that the right safety and
performance ratings of instrument and accessories are used.
Maximum Input Voltages
• Input CH1 and CH2 direct (1:1 Probe) — 300 V CAT III
• Input CH1 and CH2 via 1:10 Probe — 600 V CAT III
• Input CH1 and CH2 via 1:100 Probe — 600 V CAT III
• Meter Input —300 V CAT III, 600 V CAT II
• Scope Input — 300 V CAT III
•Voltage ratings are Vrms (50 /60 Hz) for AC sine wave and
VDC for DC applications.
Maximum Floating Voltage
• From any terminal to ground — 300 Vrms CAT III (up to 400 Hz)
Altri manuali per U1602B
1
Questo manuale è adatto per i seguenti modelli
3
Indice
Altri manuali Agilent Technologies Apparecchiature di prova
Agilent Technologies
Agilent Technologies Infiniium 80000 Series Manuale utente
Agilent Technologies
Agilent Technologies 1100 Series Manuale utente
Agilent Technologies
Agilent Technologies 54830 Series Manuale utente
Agilent Technologies
Agilent Technologies 85032F Manuale
Agilent Technologies
Agilent Technologies N5341A Manuale utente
Agilent Technologies
Agilent Technologies Medalist i3070 Series Guida utente
Agilent Technologies
Agilent Technologies 87050A Option K24 Manuale
Agilent Technologies
Agilent Technologies E5091A Manuale utente
Agilent Technologies
Agilent Technologies N9360A Manuale utente
Agilent Technologies
Agilent Technologies InfiniiVision 5000 Series Manuale utente
Agilent Technologies
Agilent Technologies 93000 SOC Series Guida all'installazione
Agilent Technologies
Agilent Technologies InfiniiVision 6000 Series Manuale utente
Agilent Technologies
Agilent Technologies 8935 Series Manuale utente
Agilent Technologies
Agilent Technologies 54522A Manuale utente
Agilent Technologies
Agilent Technologies 85056A Manuale
Agilent Technologies
Agilent Technologies N4010A Manuale utente
Agilent Technologies
Agilent Technologies 83480A Manuale utente
Agilent Technologies
Agilent Technologies 16043A Manuale operativo
Agilent Technologies
Agilent Technologies Agilent 34980A Istruzioni per l'installazione e il funzionamento
Agilent Technologies
Agilent Technologies e6601a Manuale utente
