AJAX Systems GlassProtect Manuale utente

GlassProtect User manual

Updated January 24, 2022

GlassProtect is a wireless indoor glass break detector recognizing the sound of

shattering the glass at a distance of up to 9 meters. GlassProtect can operate

up to 7 years from a pre-installed battery and has a socket for connecting a

third-party wired detector.

GlassProtect connects to the Ajax security system via the protected

radio protocol. The communication range is up to 1,000 meters in line of sight.

Also, GlassProtect can be connected to third-party security systems using the

or integration modules.

Users can congure GlassProtect via the for macOS, Windows, iOS, or

Android. The system noties users of all events through push notications, SMS,

and calls (if activated).

The user can connect the Ajax security system to the central monitoring station

of a security company.

Jeweller

Ajax uartBridge Ajax ocBridge Plus

Ajax app

Buy breakage detector GlassProtect

Functional elements

Operating Principle

GlassProtect uses a sensitive electret microphone to detect the sound of glass

breaking, consisting of a low-frequency hit sound and high-frequency crashing

sound of glass shatters. Such two-stage glass break detection decreases the

risk of false triggering.

GlassProtect detector does not react to the breaking of the lm-covered glass:

shockproof, sunscreen, decorative, or any other type of lm. To detect the breaking of

1. LED indicator

2. Microphone hole

3. SmartBracket attachment panel (perforated part is required for actuating

the tamper in case of any attempt to dismantle the detector. Don’t break it

out!)

4. External detector connection socket

5. QR code

6. Device switch

7. Tamper button

such kind of glass, we recommend using the wireless opening detector

with shock and tilt sensors.

If triggered, GlassProtect immediately transmits the alarm signal to the ,

activating the (if connected) and notifying the user and security company.

Connecting

Detector Connection to hub

Before starting connection:

Only users with administrator rights can add the device to the hub.

Pairing the detector with hub:

DoorProtect Plus

hub

sirens

1. Following the hub user guide, install the . Create the account, add

the hub, and create at least one room.

Ajax app

2. Switch on the hub and check the internet connection (via Ethernet cable

and/or GSM network).

3. Make sure that the hub is disarmed and does not update by checking its

status in the Ajax app.

1. Select Add Device in the Ajax app.

2. Name the device, scan or type the QR code (located on the detector body

and packaging), and select the location room.

For detection and pairing to occur, the detector should be located within the

coverage area of the wireless network of the hub (at a single protected object).

The connection request is transmitted for a short time: at the moment of

switching on the device.

If the device failed to pair (LED blinks once per second), switch it off for 5

seconds and retry. The detector connected to the hub appears in the list of

devices in the app. The update of the detector statuses in the list depends on

the device ping interval set in the hub settings (the default value is 36 seconds).

3. Tap Add — the countdown will start.

4. Switch on the device.

Connecting to Third-Party Systems

To connect the detector to a third-party central unit using the or

integration module, follow the recommendations in the user

manual of the respective device.

States

The states screen contains information about the device and its current

parameters. Find the GlassProtect states in the Ajax app:

Parameter Value

Temperature

Temperature of the detector, measured on the

processor and changes gradually.

Acceptable error between the value in the app

and temperature at the installation site: 2–4°C

Jeweller Signal Strength

Signal strength between the hub/range

extender and the opening detector.

We recommend installing the detector in places

where the signal strength is 2–3 bars

Connection

Connection status between the hub/range

extender and the detector:

ReX range extender name Displays the status of using a

Battery Charge Battery level of the device. Displayed as a

percentage

uartBridge

ocBridge Plus

1. Go to the Devices tab.

2. Select GlassProtect from the list.

Online — the detector is connected with the

hub/range extender

Oine — the detector has lost connection

with the hub/range extender

radio signal

range extender

Lid The tamper state, which reacts to the

detachment of or damage to the detector body

Delay When Entering, sec

Entry delay (alarm activation delay) is the time

you have to disarm the security system after

entering the room.

Functions for the connected wired detector

only.

Delay When Leaving, sec

Delay time when exiting. Delay when exiting

(alarm activation delay) is the time you have to

exit the room after arming the security system.

Functions for the connected wired detector

only.

Night Mode Delay When Entering, sec

The time of Delay When Entering in the Night

mode. Delay when entering (alarm activation

delay) is the time you have to disarm the

security system after entering the premises.

Functions for the connected wired detector

only.

Night Mode Delay When Leaving, sec

The time of Delay When Leaving in the Night

mode. Delay when leaving (alarm activation

delay) is the time you have to exit the premises

after the security system is armed.

Functions for the connected wired detector

only.

Sensitivity Selecting the sensitivity level of the

microphone:

How battery charge is displayed in

Ajax apps

What is delay when entering

What is delay when leaving

What is delay when entering

What is delay when leaving

The sensitivity level is selected based on the

results of the

External contact Status of the external detector connection to

GlassProtect

Always Active

If the option is active, the detector is always in

armed mode and noties about alarms

Chime

When enabled, a siren noties about opening

detectors triggering in the Disarmed system

mode

Temporary Deactivation Shows the status of the device temporary

deactivation function:

Low

Normal

High

detection zone test

Learn more

What is chime and how it works

No — the device operates normally and

transmits all events

Lid only — the hub administrator has

disabled notications about triggering on

the device body

Entirely — the device is completely excluded

from the system operation by the hub

administrator. The device does not follow

system commands and does not report

alarms or other events

By number of alarms — the device is

automatically disabled by the system when

the number of alarms is exceeded (specied

in the settings for Devices Auto

Deactivation). The feature is congured in

the Ajax PRO app

By timer — the device is automatically

disabled by the system when the recovery

timer expires (specied in the settings for

Devices Auto Deactivation). The feature is

congured in the Ajax PRO app

Firmware Detector rmware version

Device ID Device identier

Device No. Number of the device loop (zone)

Settings

To change the detector settings in the Ajax app:

Setting Value

First eld

Detector name that can be changed. The name

is displayed in the text of SMS and notications

in the event feed.

The name can contain up to 12 Cyrillic

characters or up to 24 Latin characters

Room

Selecting the virtual room to which

GlassProtect is assigned. The name of the

room is displayed in the text of SMS and

notications in the event feed

Delay When Entering, sec

Selecting delay time when entering. Delay when

entering (alarm activation delay) is the time you

have to disarm the security system after

entering the room.

Functions for the connected wired detector

only.

1. Select the hub if you have several of them or if you are using the PRO app.

2. Go to the Devices tab.

3. Select GlassProtect from the list.

4. Go to Settings by clicking on the .

5. Set the required parameters.

6. Click Back to save the new settings.

What is delay when entering

Delay When Leaving, sec Selecting the delay time when exiting. Delay

when exiting (alarm activation delay) is the time

you have to exit the room after arming the

security system.

Functions for the connected wired detector

only.

Arm in night mode If active, the detector will switch to armed mode

when using Night mode

Night Mode Delay When Entering, sec

The time of Delay When Entering in the Night

mode. Delay when entering (alarm activation

delay) is the time you have to disarm the

security system after entering the premises.

Functions for the connected wired detector

only.

Night Mode Delay When Leaving, sec

The time of Delay When Leaving in the Night

mode. Delay when leaving (alarm activation

delay) is the time you have to exit the premises

after the security system is armed.

Functions for the connected wired detector

only.

Alarm LED indication

Allows you to disable the ashing of the LED

indicator during an alarm. Available for devices

with rmware version 5.55.0.0 or higher

Sensitivity Selecting the sensitivity level of the

microphone:

What is delay when leaving

What is delay when entering

What is delay when leaving

How to nd the rmware version or

the ID of the detector or device?

Low

Normal

High

The sensitivity level is selected based on the
results of the 
External contact If active, GlassProtect registers external
detector alarms
Always Active
If the option is active, the detector is always in
armed mode and noties about alarms
Alert with a siren if an external contact is open If active,   added to the systemare
activated in case of an external detector alarm
Alert with a siren if glass break detected If active,   added to the systemare
activated when the glass break detected
Chime settings
Opens the settings of Chime.
 
Jeweller Signal Strength Test
Switches the detector to the Jeweller signal
strength test mode. The test allows you to
check the signal strength between the hub and
GlassProtect and determine the optimal
installation site
Detection Zone Test
Switches the detector to the detection area test
Signal Attenuation Test
Switches the detector to the signal fade test
mode (available in detectors with rmware
version 3.50 and later)
User Guide Opens GlassProtect User Guide in the Ajax app
Temporary Deactivation Allows the user to disconnect the device
without removing it from the system.
detection zone test
Learn more
sirens
sirens
How to set Chime
What is Chime
What is Jeweller Signal Strength
Test
What is Detection Zone Test
What is Attenuation Test