AJAX Systems MotionProtect Outdoor Manuale utente
MotionProtect Outdoor User Manual
MotionProtect Outdoor
is a wireless outdoor motion detector for the Ajax security
system. The detector communicates with the hub via protected
radio
protocol at a distance up to 1,700 meters in the line of sight. MotionProtect
Outdoor features protection against blocking the detector view (anti-masking
system) and triggering by pets (pet immunity). The motion detection distance is
adjustable: from 3 up to 15 meters.
MotionProtect Outdoor can operate both on pre-installed batteries or use an
external power supply. Depending on the detector settings, the batteries’ life is up
to 5 years.
Jeweller
ocBridge Plus
uartBridge
Windows. The security system noti�es users of all events through push
noti�cations, SMS, and calls (if activated).
The Ajax security system can be connected to a central monitoring station of a
security company.
Functional Elements
Buy outdoor motion detector MotionProtect Outdoor
1.
Main light indicator
2.
Upper light indicator and masking sensor
3.
Upper motion sensor lens
4.
Masking sensor
5.
Lower light indicator and masking sensor
6.
Lower motion sensor lens
7.
SmartBracket attachment panel (perforated part is required for actuating the
tamper button in case of any attempt to dismantle the detector)
8.
The hole for attaching SmartBracket panel with a screw
Operating Principle
When the system is armed, the detector continuously receives signals from two
PIR sensors. If both sensors detect identical motion, MotionProtect Outdoor
instantly transmits an alarm signal to the hub and blinks with a green LED.
MotionProtect Outdoor ignores animals, birds, insects, as well as swaying plants
and trees.
10.
Tamper button
11.
QR Code
12.
Connector for external power supply cable outlet
13.
Scrollbar for adjusting the motion detection range
If a motion is detected before the system is armed, the detector will be armed not
immediately, but during the next polling by the hub.
Anti-masking system
Masking
is an attempt to block in any way the view of the detector’s lens.
MotionProtect Outdoor detects the following types of masking:
If one or more types of masking are detected, the detector generates a masking
alarm and lights up a green LED for 1 second.
MotionProtect Outdoor detects masking regardless of the security state: armed or
disarmed.
Response time to masking
Learn more about the algorithm of the detector operation
An obstacle in front of both lenses (an object on the height of the detector and
at a distance of up to 20 cm in front of it)
An obstacle in front of any of the lenses (an object at a distance of up to 10 cm
in front of one of the lenses)
Painting or pasting any of the lenses with an opaque substance
Pasting the detector front side with an opaque substance
Applying an aerosol or painting the detector front side with paint
Connecting
Before starting connection:
How to connect the device to the hub:
1.
Following the hub user guide, install the
. Create the account, add the
hub, and create at least one room.
Ajax app
2.
Switch on the hub and check the internet connection (via Ethernet cable and/or
GSM network).
3.
Make sure that the hub is disarmed and does not update by checking its status
in the Ajax app.
1.
Select the
Add Device
option in the Ajax application.
For the detection and interfacing to occur, the detector should be located within the
coverage area of the wireless network of the hub (at a single protected object).
Request for connection to the hub is transmitted for a short time at the time of
switching on the device.
3.
Select
Add
— the countdown will begin.
4.
Switch on the device by pressing the on/off button for 3 seconds.
MotionProtect Outdoor, and then follow the standard addition procedure.
If the connection to the hub failed, repeat the connection attempt after 30 seconds.
The device connected to the hub will appear in the list of devices of the hub in the
app. The update of the detector statuses in the list depends on the device ping
interval set in the hub settings (the default value is 36 seconds).
States
Parameter
Value
1.
2.
How battery charge is displayed in
Ajax apps
Settings
No
Lid only
Entirely
By number of alarms
added to the system
How to �nd the �rmware version or
the ID of the detector or device?
sirens
�rmware
version 3.50 and later
Indication
Deactivate entirely
Deactivate lid noti�cations
Learn more about temporary
deactivation of devices
Learn more about auto deactivation of
devices
Indice
Altri manuali AJAX Systems Sensore di sicurezza
AJAX Systems
AJAX Systems MotionCam Manuale utente
AJAX Systems
AJAX Systems GlassProtect Manuale utente
AJAX Systems
AJAX Systems StreetSiren Manuale utente
AJAX Systems
AJAX Systems Hub Plus Manuale utente
AJAX Systems
AJAX Systems MotionCam Manuale utente
AJAX Systems
AJAX Systems DoorProtect Manuale utente
AJAX Systems
AJAX Systems DoorProtect Plus Manuale utente
AJAX Systems
AJAX Systems DoorProtect Manuale utente
