Akai AMD20 Manuale utente
Microset: Radio / DVD-player
with USB-port and Cardreader
GB 2
NL 29
FR 57
ES 85
DE 113
EL 144
User manual
Gebruiksaanwijzing
Manuel de l’utilisateur
Manual de instrucciones
Gebrauchsanleitung
Οδηγίες χρήσεως
AMD20
3
AMD20
Table of contents
Copyright notice
Design and specications are subject to change without notice.
1. Safety........................................................................... 3
1.1 Intended use ....................................................................3
1.2 Labels in this manual .......................................................3
1.3 General safety instructions ..............................................4
2. Preparations for use................................................... 4
2.1 Unpacking ........................................................................4
2.2 Package contents ............................................................5
3. Installation................................................................... 5
3.1 Installing the speakers .....................................................6
3.2 Connecting random equipment ........................................7
3.3 Remote control.................................................................9
4. Functions................................................................... 10
4.1 DVD Micro System.........................................................10
4.2 Remote control...............................................................11
5. Operation................................................................... 13
5.1 Master power switch ......................................................13
5.2 Quick start ......................................................................13
5.3 DVD/CD functions ..........................................................15
5.4 Radio functions ..............................................................18
5.5 USB functions ................................................................18
5.6 SD/MMC functions .........................................................19
5.7 General setup menu operation ......................................19
6. Cleaning and maintenance ...................................... 23
6.1 Handle and care of a disc ..............................................23
7. Troubleshooting........................................................ 24
8. Technical data........................................................... 26
9. Disposal of used electrical and electronic
equipment.................................................................. 28
Safety1.
Intended use1.1
The DVD Micro System plays music from CDs and music, videos and photos
from DVDs and USB. The appliance also plays photos from Kodak picture
CDs. Read the manual carefully before the rst use.
i Due to the great variety of products with external memory
connection (USB, SD/MMC, etc.) and their sometimes quite
manufacturer-specic functions we can neither guarantee that all
devices will be recognised, nor that all operating options that are
possible in theory will actually work.
2 DVDs and DVD appliances are manufactured under the worldwide
agreed DVD regional code system that the appliance will operate
only with corresponding disc of the same regional code. If the code
number on the label of a DVD does not match that on the label
alongside, the DVD will not play on this appliance.
i The appliance has built in copyright protection technology that
prevents copying from a disc to any media. If a video recorder is
connected to the appliance, the video output image will be distorted
during recording.
D Manufactured under license from Dolby Laboratories. "Dolby" and
the double-D symbol are trademarks of Dolby Laboratories.
Condential unpublished works. Copyright 1992-1997 Dolby
Laboratories. All rights reserved.
Labels in this manual1.2
! WARNING
A warning means that injury or death is possible if the instructions
are not obeyed.
! CAUTION
A caution means that damage to the equipment is possible.
3
AMD20
Table of contents
Copyright notice
Design and specications are subject to change without notice.
1. Safety........................................................................... 3
1.1 Intended use ....................................................................3
1.2 Labels in this manual .......................................................3
1.3 General safety instructions ..............................................4
2. Preparations for use................................................... 4
2.1 Unpacking ........................................................................4
2.2 Package contents ............................................................5
3. Installation................................................................... 5
3.1 Installing the speakers .....................................................6
3.2 Connecting random equipment ........................................7
3.3 Remote control.................................................................9
4. Functions................................................................... 10
4.1 DVD Micro System.........................................................10
4.2 Remote control...............................................................11
5. Operation................................................................... 13
5.1 Master power switch ......................................................13
5.2 Quick start ......................................................................13
5.3 DVD/CD functions ..........................................................15
5.4 Radio functions ..............................................................18
5.5 USB functions ................................................................18
5.6 SD/MMC functions .........................................................19
5.7 General setup menu operation ......................................19
6. Cleaning and maintenance ...................................... 23
6.1 Handle and care of a disc ..............................................23
7. Troubleshooting........................................................ 24
8. Technical data........................................................... 26
9. Disposal of used electrical and electronic
equipment.................................................................. 28
Safety1.
Intended use1.1
The DVD Micro System plays music from CDs and music, videos and photos
from DVDs and USB. The appliance also plays photos from Kodak picture
CDs. Read the manual carefully before the rst use.
i Due to the great variety of products with external memory
connection (USB, SD/MMC, etc.) and their sometimes quite
manufacturer-specic functions we can neither guarantee that all
devices will be recognised, nor that all operating options that are
possible in theory will actually work.
2 DVDs and DVD appliances are manufactured under the worldwide
agreed DVD regional code system that the appliance will operate
only with corresponding disc of the same regional code. If the code
number on the label of a DVD does not match that on the label
alongside, the DVD will not play on this appliance.
i The appliance has built in copyright protection technology that
prevents copying from a disc to any media. If a video recorder is
connected to the appliance, the video output image will be distorted
during recording.
D Manufactured under license from Dolby Laboratories. "Dolby" and
the double-D symbol are trademarks of Dolby Laboratories.
Condential unpublished works. Copyright 1992-1997 Dolby
Laboratories. All rights reserved.
Labels in this manual1.2
! WARNING
A warning means that injury or death is possible if the instructions
are not obeyed.
! CAUTION
A caution means that damage to the equipment is possible.
4
5
AMD20
i A note gives additional information, e.g. for a procedure.
General safety instructions1.3
! WARNING
Do not put force on the appliance. The appliance can fall and can
cause serious injury.
! CAUTION
Do not spill any liquid on the appliance.
! WARNING
Do not insert any objects in the ventilation holes.
! CAUTION
Do not block the ventilation holes.
i This appliance is double insulated; therefore no earth wire is
required. Always check that the mains voltage corresponds to the
voltage on the rating plate.
L This appliance employs a laser system. To prevent direct exposure
to the laser beam, do not open the appliance. Visible laser
radiation when open and interlock defeated.
Preparations for use2.
Unpacking2.1
● Unpack the appliance carefully.
● Check the package contents as described below. If any item is missing,
please contact your reseller.
● Remove the labels from the front panel carefully if present.
i We recommend that you retain the original carton and packing
materials in case it ever becomes necessary to return your product
for service. This is the only way to safely protect the product
against damage in transit. If you do dispose of the carton and the
packing materials, please remember to recycle with due care to the
environment.
Package contents2.2
The following items are included in the received package:
1 DVD Micro System
2 Speakers
2 Pair of speaker wire
1 Remote control
2 Batteries (AAA)
1 RCA cable
1 Operator manual
i If any item is missing, please contact your reseller.
Installation3.
● Put the appliance on a horizontal at surface.
● Connect the speakers to the appliance. Read the paragraph
"Installing the speakers".
● Connect the random equipment to the appliance. Read the paragraph
"Connecting random equipment".
● Connect the appliance to the mains.
● Install the batteries in the remote control. Read the paragraph
"Remote control".
!
CAUTION
● Do not put the appliance near a heat source.
● Do not expose the appliance to direct sunlight.
4
5
AMD20
i A note gives additional information, e.g. for a procedure.
General safety instructions1.3
! WARNING
Do not put force on the appliance. The appliance can fall and can
cause serious injury.
! CAUTION
Do not spill any liquid on the appliance.
! WARNING
Do not insert any objects in the ventilation holes.
! CAUTION
Do not block the ventilation holes.
i This appliance is double insulated; therefore no earth wire is
required. Always check that the mains voltage corresponds to the
voltage on the rating plate.
L This appliance employs a laser system. To prevent direct exposure
to the laser beam, do not open the appliance. Visible laser
radiation when open and interlock defeated.
Preparations for use2.
Unpacking2.1
● Unpack the appliance carefully.
● Check the package contents as described below. If any item is missing,
please contact your reseller.
● Remove the labels from the front panel carefully if present.
i We recommend that you retain the original carton and packing
materials in case it ever becomes necessary to return your product
for service. This is the only way to safely protect the product
against damage in transit. If you do dispose of the carton and the
packing materials, please remember to recycle with due care to the
environment.
Package contents2.2
The following items are included in the received package:
1 DVD Micro System
2 Speakers
2 Pair of speaker wire
1 Remote control
2 Batteries (AAA)
1 RCA cable
1 Operator manual
i If any item is missing, please contact your reseller.
Installation3.
● Put the appliance on a horizontal at surface.
● Connect the speakers to the appliance. Read the paragraph
"Installing the speakers".
● Connect the random equipment to the appliance. Read the paragraph
"Connecting random equipment".
● Connect the appliance to the mains.
● Install the batteries in the remote control. Read the paragraph
"Remote control".
!
CAUTION
● Do not put the appliance near a heat source.
● Do not expose the appliance to direct sunlight.
6
7
AMD20
i This appliance is equipped with rubber feet to prevent it from
moving. The feet are made from non-migrating material specially
formulated to avoid leaving any marks or stains on furniture.
However, certain types of furniture polishes, wood preservatives or
cleaning sprays cause the rubber to soften and leave marks or a
residue on the furniture, and potentially risk the surface to become
damaged. To prevent damage to wooden surfaces, we recommend
that you apply self-adhesive pads to the bottom of the rubber feet
before installation.
Installing the speakers3.1
6~16 ohm
LINE INPUT
The cables and terminals are colour-coded:
- Red wires connect to red terminals (+).
- Black wires connect to black terminals (-).
● Place the speakers on a horizontal at surface. Place the speakers close
enough to the appliance to be able to connect the wires.
● Connect the wires as described below.
Connection to speakers
● Press the latches to open the terminals. Keep the latches depressed.
● Connect the wire ends to the speakers matching the (+) and (-) polarity
markings.
● Release the latches to lock the wire ends.
Connection to the appliance
● Press the latches to open the terminals.
● Connect the wire ends of the speakers to the appliance matching the (+)
and (-) polarity markings.
● Lift the latches to lock the wire ends.
Connecting random equipment3.2
6~16 ohm
LINE INPUT
The appliance includes various options for permanent connection of random
equipment. Suitable cables can be purchased at your reseller.
6
7
AMD20
i This appliance is equipped with rubber feet to prevent it from
moving. The feet are made from non-migrating material specially
formulated to avoid leaving any marks or stains on furniture.
However, certain types of furniture polishes, wood preservatives or
cleaning sprays cause the rubber to soften and leave marks or a
residue on the furniture, and potentially risk the surface to become
damaged. To prevent damage to wooden surfaces, we recommend
that you apply self-adhesive pads to the bottom of the rubber feet
before installation.
Installing the speakers3.1
6~16 ohm
LINE INPUT
The cables and terminals are colour-coded:
- Red wires connect to red terminals (+).
- Black wires connect to black terminals (-).
● Place the speakers on a horizontal at surface. Place the speakers close
enough to the appliance to be able to connect the wires.
● Connect the wires as described below.
Connection to speakers
● Press the latches to open the terminals. Keep the latches depressed.
● Connect the wire ends to the speakers matching the (+) and (-) polarity
markings.
● Release the latches to lock the wire ends.
Connection to the appliance
● Press the latches to open the terminals.
● Connect the wire ends of the speakers to the appliance matching the (+)
and (-) polarity markings.
● Lift the latches to lock the wire ends.
Connecting random equipment3.2
6~16 ohm
LINE INPUT
The appliance includes various options for permanent connection of random
equipment. Suitable cables can be purchased at your reseller.
8
9
AMD20
Audio connections (input)
● Stereo audio: Connect a suitable cable to the R/L channels of the LINE IN
connection.
Audio connections (output)
The appliance has the following audio outputs:
● Stereo audio: Connect a suitable cable to the R/L channels of the AUDIO
OUT connection.
● Coaxial digital audio: Insert a suitable cable into the COAXIAL AUDIO
OUT connection.
Video connections
The video connections allow you to send to video signal (still images or
movies) to a connected TV.
The appliance has the following video outputs (in order of preference):
● Component: Connect a suitable cable to the Pr/Y/Pb channels of the
COMPONENT VIDEO OUT connection.
● SCART: Insert a suitable cable into the SCART OUT connection.
● S-Video: Insert a suitable cable into the S-VIDEO OUTPUT connection.
● Composite video: Insert a suitable cable into the VIDEO OUTPUT
connection.
i Do not make all connections simultaneously as this will affect the
output quality.
Cable connection
● Insert an FM aerial or a suitable cable into the RADIO ANTENNA
connection.
Remote control3.3
Install batteries
● Remove the battery cover.
● Insert the batteries matching the (+) and (-)
polarity markings.
● Re-install the battery cover.
! CAUTION Incorrect installation
can cause battery leakage and
corrosion which will damage the
appliance. Corrosion, oxidation,
battery leakage and any other
gradually acidic defect of this nature
will invalidate the guarantee.
8
9
AMD20
Audio connections (input)
● Stereo audio: Connect a suitable cable to the R/L channels of the LINE IN
connection.
Audio connections (output)
The appliance has the following audio outputs:
● Stereo audio: Connect a suitable cable to the R/L channels of the AUDIO
OUT connection.
● Coaxial digital audio: Insert a suitable cable into the COAXIAL AUDIO
OUT connection.
Video connections
The video connections allow you to send to video signal (still images or
movies) to a connected TV.
The appliance has the following video outputs (in order of preference):
● Component: Connect a suitable cable to the Pr/Y/Pb channels of the
COMPONENT VIDEO OUT connection.
● SCART: Insert a suitable cable into the SCART OUT connection.
● S-Video: Insert a suitable cable into the S-VIDEO OUTPUT connection.
● Composite video: Insert a suitable cable into the VIDEO OUTPUT
connection.
i Do not make all connections simultaneously as this will affect the
output quality.
Cable connection
● Insert an FM aerial or a suitable cable into the RADIO ANTENNA
connection.
Remote control3.3
Install batteries
● Remove the battery cover.
● Insert the batteries matching the (+) and (-)
polarity markings.
● Re-install the battery cover.
! CAUTION Incorrect installation
can cause battery leakage and
corrosion which will damage the
appliance. Corrosion, oxidation,
battery leakage and any other
gradually acidic defect of this nature
will invalidate the guarantee.
10 11
AMD20
11
AMD20
Functions4.
DVD Micro System4.1
12
9
13
11
10
8
1 2 3 5 6 74
Front panel
1 Standby button
2 Display
3 Disc tray
4 Remote sensor
5 Headphone jack
6 USB slot
7 Memory card slot
8 Cover for connection of external devices
9 Previous track/chapter button
10 Next track/chapter button
11 Volume dial
12 Play/Pause button
13 Open/close button
Back panel
14 Master power switch
Remote control4.2
General functions
15 Standby button
16 Digit buttons (0-10+)
17 SETUP button
18 VOLUME +/- button
19 Arrow buttons
20 SOUND EFFECT button (S.EFFECT)
21 USB button
22 TONE button
23 CHANNEL LEVEL button (CH-LEVEL)
24 ENTER button
25 SOURCE SELECT button
26 VIDEO OUTPUT MODE button
(V-MODE)
27 MUTE button
6~16 ohm
LINE INPUT
14
16
23
18
27
26
25
24
22
15
17
20
21
19
Altri manuali per AMD20
1
Indice
Altri manuali Akai Impianto stereo
Akai
Akai AC-220 Manuale utente
Akai
Akai AMD02 Manuale utente
Akai
Akai AHC1600 Manuale utente
Akai
Akai QX-3700DV Manuale utente
Akai
Akai TX-350 Manuale utente
Akai
Akai DT-100 Manuale utente
Akai
Akai AMC320 Manuale utente
Akai
Akai AMN250UC Guida
Akai
Akai MPC 5000 Manuale utente
Akai
Akai QZ-503R Series Manuale utente
Akai
Akai AM-301W Manuale utente
Akai
Akai UC-K2 Manuale utente
Akai
Akai AMBT-67 Manuale utente
Akai
Akai MPC Manuale utente
Akai
Akai TX-500 Manuale utente
Akai
Akai QX-D3500 Manuale utente
Akai
Akai QX-D4300 Manuale utente
Akai
Akai ACR-18H Manuale utente
Akai
Akai KHS888W1 Manuale utente
Akai
Akai QX-3700 Manuale utente
