Akaso V1 Manuale utente
USER
MANUAL
V1 Car Dash Camera
English
HOW TO POWER ON
2. Icon Introduction
: Setup : Playback
: the shortcut key of Parking Monitor
: Start to recording : Lock the video
: Microphone : Stop recording
: Back : Backward
: Forward : Up
: Down : OK or Confirm
1
2
3
① Insert the car charger into your car’s cigarette lighter socket.
② Insert the Mini USB into the dash cam USB port
(Charger Specification: In: DC 12-24V, Out: DC 5V 2A)
Note:
① After powering on dash cam through the car charger, the dash cam will automatically
turn on and start recording (if the card has been inserted). If wanting to do some
settings, please firstly stop recording.
② Please charge for 30 minutes before using this dash cam powered by the built-in battery.
③ When the dash cam is connected to the car’s cigarette lighter socket through the car
charger, the built-in battery will be charging at the same time, the red indicator light is
on. When it charged fully, the red light goes off.
01 02
V1 Dash Camera Car Charger Adapter
Car Crowbar +
Cable ClipsElectrostatic stickers * 2 Quick Reference Guide
USB CableBracket * 2
WHAT’S IN THE BOX?
QUICK
REFERENCE
GUIDE
V1Car Dash Camera
1. Micro SD Card Slot
2. Microphone
3. Wi-Fi Button
4. USB Charging
5. Reset
6. Power Button
7. Camera Lens
8. Bracket Slot
CAMERA OVERVIEW
14
8
7
1. Camera Introduction
16GB Micro SD Card
16GB
Pleasetear off the
filmbefore installing it.
12
34
2
3
5
6
Note: USB Cable is only used to connect the computer and the dash camera
to read the card.
④ The built-in battery is only used to power the "parking monitor" function.
In normal use, please plug the car charger into the cigarette lighter of the car to power
the dash cam. The built-in battery is not recommended as a normal use of power
supply to the dash cam, in order to avoid the battery no power when parking, and
cause the parking monitoring function to fail.
⑤ The camera can be powered by connecting the phone adapter 5VDC with the USB
Cable to plug into a power outlet.
When charging, please shut down the camera by long press the power button.
Tips:
① Blue light flash means the camera is recording.
② Red light means the camera is charging.
③ The green icon on screen is flashing that means GPS is unsuccessful positioning,
when this icon doesn’t flash that means GPS is Positioning success.
03 04
PLAYBACK VIDEOS
1. Playback Videos on Dash Camera
Enter the playback interface, there are videos with or without lock.
Locked videos are videos of emergency recording and parking monitor; Unlocked videos
are the normal videos.
① After turning on the camera, press to stop recording.
2. Unlocked videos to playback
②Press to enter the playback interface to play videos which is stored on the card.
③Press / to choose the video you want to play (the yellow arrow shown on which
video means that video is chose), then press to play the video.
02:02:56
720P
07/27/2019 11:27:36
02:02:56
1080FHD
2/3
15:33
2019 0723 153343 001.MOV
3
4
5 6 7 8
The recorded video’s resolution
1
The recorded video’s date
2
The recorded video’s time
3
The recorded video’s file number
4
Back to the playback interface
5
Unlock/Lock video
6
Delete video
7
Play current video
8
The time schedule of video playing
9
Pause current video’s playing
10
1080P
07/23/19
1
2
15:33
2019 0723 153343 001.MOV
10
00:00:01
07/23/19
9
MAIN FUNCTIONS
1. Loop Recording - off / 1 minute / 3 minutes / 5 minutes for optional.
Default is 3 minutes.
The files will be saved every 3 minutes if you choose 3 minutes. When the memory card is
full, the new files will cover the old one if the loop recording is on; If it is off, the camera
won’t work any more, please format the SD card or change a new one.
After turning on the camera, press button to stop recording.
02:02:56
720P
08/27/2018 11:27:36
05 06
Note:
When playing, press one time to end playing, press twice times to exit the current
playing video.
When playing, press one time to end playing, press twice times to enter Unlock / Lock
the current video’s setting.
When playing, press one time to end playing, press twice times to enter delete the
current video’s setting.
Note:
When playing, if you want to back to Playback interface, Unlock / Lock and delete the
video, firstly press to pause playing, then you can back to playback interface, Unlock /
Lock and delete the video.
3. Locked videos to playback
Back to the playback interface
6
15:36
2019 0723 153343 001.MOV
4
5
6 7 8 9
1080P
07/23/19
1
3
2
15:33
2019 0723 153343 001.MOV
11
00:00:01
07/23/19
10
The recorded video’s resolution
1
The video is locked
2
The recorded video’s date
3
The recorded video’s time
4
The recorded video’s file number
5
Unlock/Lock video
7
Delete video
8
Play current video
9
The time schedule of video playing
10
Pause current video’s playing
11
Press → to choose , press enter into video settings.
02:02:56
720P
08/27/2018 11:27:36
Setup
Video
Video
Video
Resolution
WDR
Record Audio
Looprecording
Video
Resolution
WDR
Record Audio
Looprecording
Video
Date Stamp
GSENSOR
Video
Date Stamp
GSENSOR
Off
Low
Medium
High
Video
Resolution
WDR
Record Audio
Looprecording
Video
Resolution
WDR
Record Audio
Looprecording
Off
1 Minute
3 Minutes
5 Minutes
Press to choose “Loop recording”, press and press or to choose the time or
off, press to confirm and exit.
2. G-Sensor - off / Low / Medium / High for optional. Default is low.
Gravity Sensor means any collision will activate the camera to record, and the videos will
be locked which will never be covered by new files.
The video is stored as a file every three minutes. When driving, if the road is bumpy, please
adjust it to low or turn off it directly to prevent the camera doesn’t work because of the
memory card is full. When parking, recommend you to adjust it to medium.
Enter into the video setting, press to choose “G-Sensor”, press and press or
to choose off / Low / Medium / High, press to confirm and exit.
07 08
3. Parking Monitor
Default is off.
When there is no power input and the camera has been turned off, the camera will be
turned on automatically and start recording, the video will be saved and the camera
automatic shutdown after 30 seconds.
Setup Setup
Beep Sound
Parking Monitor
Date/Time
screensavers
Setup Setup
Beep Sound
Parking Monitor
Date/Time
screensavers
Setup
Beep Sound
Parking Monitor
Date/Time
screensavers
Setup
Beep Sound
Parking Monitor
Date/Time
screensavers
Off
On
Enter into the setup setting, press to choose “Parking Monitor”, press and press
or to choose off / on, press to confirm and exit.
4. Screensavers
Default is 1 minute. The screen will be turned off automatically after the time you set.
After turning off the screen to reduce power consumption, the camera still work and record
under the display off.
Press any button to turn on the screen.
Setup
Beep Sound
Parking Monitor
Date/Time
screensavers
screensavers
Beep Sound
Parking Monitor
Date/Time
screensavers
Off
30 Seconds
1 Minute
2 Minutes
Enter into the setup setting, press to choose “Screensavers”, press and press or
to choose off / 30seconds / 1minute / 2minutes, press to confirm and exit.
09 10
Setup Setup
Beep Sound
Parking Monitor
Date/Time
screensavers
Setup
Default Setting
Frequency
Version
Format
Format
Default Setting
Frequency
Version
Format
All data wil be
deleted
Cancel
OK
5. Format
Every time you insert a SD card, please format it in the camera to ensure that the SD card
is compatible with the camera.
All data will be deleted. Before formatting your memory card, please remember to backup
your important data on your other devices.
Enter into the setup setting, press to choose “Format”, press and press or to
choose “Cancel or OK”, press to confirm and exit.
PHONE APP
1. Phone APP Connection
①Open Wi-Fi: Press “Wi-Fi” button on the left of camera to enter Wi-Fi settings interface.
②Open “Akaso Car” on Phone, click “CONNECT CAR DVR” to enter into phone Wi-Fi
system, find the camera’s SSID and input the PWD to connect the camera.
WiFi Button
For your safety, GPS will be
disabled while WIFI
is in use.
SSID: DV000b6a263078
PWD: 12345678
Refresh WiFi_OFF
11 12
Connect CAR DVR
AKASO V1
③ Back to the Main Interface of “Akaso Car”, click “CONNECT CAR DVR” to enter video
interface.
25/09/2018 11:07:10
Real-time Preview
: Click to enter into the setting interface.
: Click to open the full screen on phone.
Note: There is interference between Wi-Fi
and GPS. For safety, please turn off the WiFi
before driving to ensure the videos record
GPS track.
2. Playback on Phone
①Click to enter into the playback interface.
All video flips of card will show, then click on the top right corner to click and select the
video flips you want to download, click on the bottom right corner to download.
② Wait for a while, after finishing the download, you will see “Downloaded” on the video
flips, see following:
13 14
Connect CAR DVR
AKASO V1
Storage card
01-02-2019
221.26MB 221.16MB
221.43MB
Storage card
01-02-2019
221.26MB 221.16MB
221.43MB
③Click “Storage card” to select “Local” to check the downloaded video flips.
Turn off the camera’s Wi-Fi, and click videos to play.
Note:
① When watch the download videos, it must be turn off the camera's Wi-Fi to get the GPS
track.
② When open the Wi-Fi, it will interfere with the GPS function. So please close the Wi-Fi
before driving to ensure the videos record GPS track.
③ When you parking at outside, the GPS need about 3 minutes to search and positioning,
please wait patiently.
3. Phone APP Settings
25/09/2018 11:07:10
Real-time Preview
Click to enter to setting interface. It will be synchronized to the camera directly when
you adjust the setting information on APP.
The ”WiFi Setting” means you can customize the camera’s Wi-Fi name and password on APP.
15 16
Storage card
04-05-2019
14:38:54 105.26MB
Front
14:38:54 105.26MB
Rear
Downloading......1/2
Storage card
01-02-2019
221.26MB
Downloaded
221.16MB
221.43MB
Downloaded
Storage card
01-02-2019
221.26MB
Downloaded
221.16MB
221.43MB
Downloaded
1/2
Storage card
Storage card
Local
221.26MB
Downloaded
221.16MB
221.43MB
Downloaded
Altri manuali per V1
1
Indice
Lingue:
Altri manuali Akaso Telecamera da cruscotto
Akaso
Akaso Trace 1 Manuale utente
Akaso
Akaso S6 Manuale utente
Akaso
Akaso C320 Manuale utente
Akaso
Akaso DL12 Manuale utente
Akaso
Akaso Trace 1 Manuale utente
Akaso
Akaso DL2 Manuale utente
Akaso
Akaso Trace 1 Pro Manuale utente
Akaso
Akaso DL7 Manuale utente
Akaso
Akaso D2000 Manuale utente
Akaso
Akaso V1 Manuale utente
Akaso
Akaso DL7 Manuale utente
Akaso
Akaso P4 Manuale utente
Akaso
Akaso C200 Manuale utente
Akaso
Akaso C200 Manuale utente
Akaso
Akaso DL9 Manuale utente
Akaso
Akaso DL12 Manuale utente
Akaso
Akaso V300 Manuale utente
Akaso
Akaso D2000 Manuale utente
Akaso
Akaso C330 Manuale utente
Akaso
Akaso Trace 1 Manuale utente
