Alaxala AX3640S Istruzioni per il montaggio

AX3640S/AX3630S Software Manual

Configuration Command Reference Vol. 1

For Version 11.7

AX36S-S004X-F0





Relevant products

This manual applies to the models in the AX3640S and AX3630S series of switches. It also describes the functionality of version 11.7 of the

software. The described functionality is that supported by the software OS-L3A-A/OS-L3A and OS-L3L-A/OS-L3L, and by optional licenses.





Export restrictions

In the event that any or all ALAXALA products (including technologies, programs and services) described or contained herein are controlled

under any of applicable export control laws and regulations (including the Foreign Exchange and Foreign Trade Law of Japan and United States

export control laws and regulations), such products shall not be exported without obtaining the required export licenses from the authorities

concerned in accordance with the above laws.





Trademarks

Cisco is a registered trademark of Cisco Systems, Inc. in the United States and other countries.

Ethernet is a registered trademark of Xerox Corporation.

Internet Explorer is either a registered trademark or trademark of Microsoft Corporation in the United States and other countries.

IPX is a trademark of Novell, Inc.

Microsoft is either a registered trademark or trademark of Microsoft Corporation in the United States and other countries.

Octpower is a registered trademark of NEC Corporation.

RSA and RSA SecurID are trademarks or registered trademarks of RSA Security Inc. in the United States and other countries.

sFlow is a registered trademark of InMon Corporation in the United States and other countries.

UNIX is a registered trademark of The Open Group in the United States and other countries.

VitalQIP and VitalQIP Registration Manager are trademarks of Lucent Technologies.

VLANaccessClient is a trademark of NEC Soft, Ltd.

VLANaccessController and VLANaccessAgent are trademarks of NEC Corporation.

Windows is a registered trademark of Microsoft Corporation in the United States and other countries.

Other company and product names in this manual are trademarks or registered trademarks of their respective owners.





Reading and storing this manual

Before you use the equipment, carefully read the manual and make sure that you understand all safety precautions.

After reading the manual, keep it in a convenient place for easy reference.





Notes

Information in this document is subject to change without notice.





Editions history

December 2011 (Edition 16) AX36S-S004X-F0





Copyright

History of Amendments

[For version 11.7]

Summary of amendments

In addition to the above changes, minor editorial corrections were made.

[For version 11.6]

Descriptions of AX3650S series switches were moved to the AX3800S/AX3650S Software Manual.

[For version 11.5]

Summary of amendments

Location and title Changes

17 Flow Detection Modes and Flow

Operations

•The layer3-6 parameter was added to the flow detection mode

command.

18 Access Lists •The policy-list parameter was added to the following commands:

access-list

permit (ip access-list extended)

34 SNMP •The policy-base and informs parameters were added to the

snmp-server host command.

•The snmp-server informs command was added.

Item Changes

Connecting from an Operation Terminal •A parameter related to VRF was added to the following commands:

ftp-server

transport input

ip access-group

ipv6 access-class

•The following commands were added:

aaa authentication enable attribute-user-per-method

aaa authentication enable end-by-reject

aaa authentication login end-by-reject

Time Settings and NTP •A description related to VRF was added to the following commands:

ntp access-group

ntp peer

ntp server

Device Management •The following commands were added:

switch provision

system fan mode

system temperature-warning-level

Power Saving Functionality •The following commands were added:

power-control port cool-standby

schedule-power-control port cool-standby

schedule-power-control port-led

schedule-power-control system-sleep

system port-led

system port-led trigger console

system port-led trigger interface

system port-led trigger mc

Ethernet •The system minimum-tagged-frame-length-68 command was

added.

Link Aggregation •The port-channel load-balance command was added.

[For version 11.4]

Summary of amendments

[For version 11.2]

Summary of amendments

MAC Address Table •The mac-address-table limit command was added.

Ring Protocol •The flush-request-transmit vlan command was added.

Flow Detection Modes and Flow Operations •The flow action-change cos command was added.

SNMP •A parameter related to VRF was added to the following commands:

snmp-server community

snmp-server host

snmp-server user

•A description related to AX3650S series switches was added to the

snmp-server host command.

Log Data Output Functionality •A parameter related to VRF was added to the logging host command.

Item Changes

Power Saving Functionality •This chapter was added.

Ring Protocol •The following commands were added:

multi-fault-detection holdtime

multi-fault-detection interval

multi-fault-detection mode

multi-fault-detection vlan

Flow detection mode •The layer3-dhcp-1 parameter was added to the flow detection

mode command.

DHCP snooping •This chapter was added.

Uplink redundancy •The preemption-delay parameter was added to the switchport

backup interface command.

•The following commands were added:

switchport backup mac-address-table update exclude-vlan

switchport backup mac-address-table update transmit

SNMP •The switchport-backup parameter was added to the snmp-server

host command.

Error messages displayed when editing the

configuration

•The subsection Information about the power saving functionality was

added.

•The subsection DHCP snooping information was added.

Item Changes

aaa authentication enable

aaa authentication login console

aaa authorization commands console

Item Changes

[For version 11.1]

Summary of amendments

[For version 11.0]

Summary of amendments

Ethernet •A description related to 100BASE-FX was added to the following

commands:

duplex

flowcontrol

interface gigabitethernet

mdix auto

mtu

speed

system mtu

Ring Protocol •The preempt-delay command was added.

VRRP •The <interface type> and <interface number> parameters were added

to the track interface command.

Uplink redundancy •This chapter was added.

CFM •The following commands were added:

ethernet cfm cc alarm-priority

ethernet cfm cc alarm-reset-time

ethernet cfm cc alarm-start-time

ethernet cfm cc interval

Log Data Output Functionality •The no-date-info parameter was added to the logging host

command.

Error messages displayed when editing the

configuration

•The subsection Uplink redundancy information was added.

Item Changes

Layer 2 Authentication •It was now possible to use the following commands even when only one

of IEEE802.1X authentication or MAC-based authentication is used.

authentication arp-relay

authentication ip access-group

IEEE802.1X •The dot1x logging enable command was added.

•A parameter was added to the terminal detection behavior switching

option.

dot1x supplicant-detection

dot1x vlan dynamic supplicant-detection

dot1x vlan supplicant-detection

CFM •This chapter was added.

Error messages displayed when editing the

configuration

•The subsection CFM information was added.

Item Changes

IGMP snooping •The ip igmp snooping fast-leave command was added.

GSRP •The note on the gsrp command was changed.

•The gsrp limit-control command was added.

Item Changes

[For version 10.8]

Summary of amendments

[For version 10.7]

Summary of amendments

Item Changes

Ring Protocol •The range of values for the health-check interval command

parameter was changed.

Access Lists •The type and code of ICMP were added to the detection conditions for

the following commands:

access-list

deny (ip access-list extended)

deny (ipv6 access-list)

ip access-list extended

ipv6 access-list

permit (ip access-list extended)

permit (ipv6 access-list)

QoS •The type and code of ICMP were added to the detection conditions for

the following commands:

qos (ip qos-flow-list)

qos (ipv6 qos-flow-list)

Layer 2 Authentication •This chapter was added.

Web Authentication •A parameter was added to the web-authenticaion ip address

command.

MAC-based Authentication •The mac-authentication dot1q-vlan force-authorized

command was added.

GSRP •A parameter was added to the no-neighbor-to-master command.

Item Changes

TACACS+

•A description of how to specify an IPv6 address was added to the

radius-server host command.

Device Management •The swrt_multicast_table command was added.

Ethernet •The following commands were added:

link up-debounce

mdix auto

system flowcontrol off

VLAN •The following commands were added:

down-debounce

up-debounce

Spanning Tree Protocol •The notes on the following commands were changed:

instance

spanning-tree mode

Ring Protocol •The notes on the following commands were changed:

axrp

axrp virtual-link

axrp vlan-mapping

axrp-primary-port

axrp-ring-port

[For version 10.6]

Summary of amendments

MAC-based Authentication •The following commands were added:

mac-authentication auto-logout

mac-authentication dynamic-vlan max-user

•A description of how to specify an IPv6 address was added to the

mac-authentication radius-server host command.

GSRP •The notes on the following commands were changed:

gsrp

gsrp no-flush-port

gsrp reset-flush-port

L2 Loop Detection •This chapter was added.

SNMP •The loop-detection parameter was added to the snmp-server host

command.

Item Changes

VLAN •The l2-isolation command was added.

Ring Protocol •The axrp virtual-link command was added.

Flow detection mode •The layer3-5 parameter was added to the flow detection mode

command.

•The flow detection out mode command was added.

Access Lists •The out parameter indicating Outbound was added to the following

commands:

ip access-group

ipv6 traffic-filter

mac access-group

•Parameters that specify the upper-layer protocol condition for IPv6 packets

were added to the following commands:

deny (ipv6 access-list)

permit (ipv6 access-list)

QoS •Parameters that specify the upper-layer protocol condition for IPv6 packets

were added to the following commands:

qos (ipv6 qos-flow-list)

•A description of AX3640S series switches was added to the 2pq+6drr

parameter of the qos-queue-list command.

Item Changes

[For version 10.5]

Summary of amendments

Web Authentication •The following commands were added:

authentication arp-relay

authentication ip access-group

web-authentication ip address

web-authentication jump-url

web-authentication logging enable

web-authentication logout ping tos-windows

web-authentication logout ping ttl

web-authentication logout polling count

web-authentication logout polling enable

web-authentication logout polling interval

web-authentication logout polling retry-interval

web-authentication port

web-authentication redirect enable

web-authentication redirect-mode

web-authentication static-vlan max-user

web-authentication web-port

MAC-based Authentication •This chapter was added.

Log Data Output Functionality •The descriptions of the following commands were changed:

logging email-event-kind

logging event-kind

Error messages displayed when editing

the configuration

•The subsection MAC-based authentication information was added.

Item Changes

Ethernet •For 10BASE-T/100BASE-TX/1000BASE-T, the behavior when a value

smaller than 2000 milliseconds is specified for the link debounce

command was changed.

VLAN •For the mac-address command, a description of the number of MAC

addresses that can be registered when the mac-based-vlan static-only

command is set was added.

•The mac-based-vlan static-only command was added.

Spanning Tree Protocol •Notes on supporting the STP compatibility mode were added to the

spanning-tree link-type command.

Access Lists •The range parameter was added to the parameters that specify source and

destination port numbers of the following commands:

access-list

deny (ip access-list extended)

permit (ip access-list extended)

QoS •The range parameter was added to the parameters that specify the source

and destination port numbers of the qos (ip qos-flow-list) command:

•The copy-user-priority parameter, which specifies user priority

inheritance, was added to the action specifications for the following

commands:

qos (ip qos-flow-list)

qos (ipv6 qos-flow-list)

qos (mac qos-flow-list)

•A parameter that specifies the burst size for port bandwidth control was

added to the traffic-shape rate command.

Log Data Output Functionality •The logging syslog-dump command was added.

Item Changes

[For version 10.4]

Summary of amendments

[For version 10.3]

Summary of amendments

[For version 10.2]

Summary of amendments

sFlow Statistics •The range of values for the <sample count> parameter of the sflow sample

command was changed.

Item Changes

Connecting from an Operation

Terminal

•The descriptions about the <num> parameters of the line vty command

were changed.

Ring Protocol •This chapter was added.

Authentication VLAN •The fense vaa-sync command was added.

sFlow Statistics •This chapter was added.

Port Mirroring •The method for specifying monitor ports was changed to the list format.

Error messages displayed when editing

the configuration

•The subsection Ring Protocol information was added.

•The subsection sFlow statistics was added.

Item Changes

TACACS+

•local was added to the <method> parameter of the aaa authorization

commands command.

•The commands exec, parser view, and username commands were added.

MAC Address Table •The description of the mac-address-table static command was

changed.

Access Lists •slow-protocol was added as a destination MAC address name that can be

specified.

QoS •slow-protocol was added as a destination MAC address name that can be

specified.

Web Authentication •This chapter was added.

Authentication VLAN •This chapter was added.

IEEE 802.3ah/UDLD •This chapter was added.

Error messages displayed when editing

the configuration

•The subsection Web authentication information was added.

•The subsection Authentication VLAN information was added.

Item Changes

TACACS+

•The commands aaa accounting exec and aaa accounting commands

were added.

QoS •The description of Notes 1 for the qos-queue-group and qos-queue-list

commands was revised.

Power Supply Redundancy •The power redundancy-mode command was added.

Item Changes

[For version 10.1]

Summary of amendments

GSRP •The specifiable range of values for the <GROUP ID> parameter of the

vlan-group disable command was modified.

•The specifiable range of values for the <GROUP ID> parameter of the

vlan-group vlan command was modified.

•The specifiable range of values for the <GROUP ID> parameter of the

vlan-group priority command was modified.

SNMP •The snmp-server engineID local, snmp-server group, snmp-server

user, and snmp-server view commands were added.

•3{noauth | auth | priv} was added to the version parameter of the

snmp-server host command.

•The agent-address <agent-address> parameter was added to the

snmp-server traps command.

Item Changes

Spanning Tree Protocol •A description of the spanning-tree bpdufilter command was added.

Item Changes

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Alaxala Interruttore

Alaxala

Alaxala AX2200S Series Manuale utente

Alaxala

Alaxala AX3800S series Istruzioni di montaggio

Alaxala

Alaxala AX6700S series Manuale utente

Alaxala

Alaxala AX6300S series Manuale utente

Alaxala

Alaxala AX6300S series Manuale utente

Alaxala

Alaxala AX6700S series Manuale utente

Alaxala

Alaxala AX1250S Series Istruzioni per il montaggio

Alaxala

Alaxala AX1250S Series Manuale utente

Alaxala

Alaxala AX6700S series Istruzioni per il montaggio

Manuali Interruttore popolari di altre marche

URC

URC Total Control MFS-8 Manuale utente

Azbil

Azbil HPQ-D11 Manuale utente

Sony

Sony DFS-900M Manuale utente

SICK

SICK i17S Manuale utente

F&F

F&F SZR-277 Manuale utente

Shure

Shure UAMS/BK Manuale utente

Dräger

Dräger X-zone Switch Off Manuale utente

Asco

Asco Joucomatic 349 Series Manuale utente

BT Mini Hub Manuale utente

D-Link

D-Link DES-1226G Manuale utente

Johnson Controls

Johnson Controls FS80-C Manuale utente

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Manuale utente

MicroNet

MicroNet SP1200A Manuale utente

Ruijie

Ruijie RG-PF2920 Series Manuale di installazione e funzionamento

Altinex

Altinex DA1914SX Manuale utente

MiLAN

MiLAN MIL-SM2401M Manuale utente

RJM

RJM MASTERMIND PBC/6X Manuale utente

Atlas

Atlas MMK-KVM8 Manuale utente