Allegion Cisa Mito Sensor Manuale utente

Installation and User Manual

Mito Sensor

item 113205650 / 113215650

cisa.com

allegion.com

- 2 -

CONTENTS

GENERAL DESCRIPTION ...........................................................................................................3

Supplied parts................................................................................................................................3

INSTALLATION..............................................................................................................................4

Introduction ....................................................................................................................................4

Safety regulations..........................................................................................................................4

Installation......................................................................................................................................5

Lock characteristics .......................................................................................................................7

Final testing....................................................................................................................................8

Regulatory compliance..................................................................................................................8

Power supply cable characteristics (supplied) ..............................................................................9

Power supply characteristics...................................................................................................... 10

Warning....................................................................................................................................... 10

OPERATION...............................................................................................................................11

Maintenance ................................................................................................................................11

Certicate of compliance with the Construction Products Regulation No. 305/2011 ..................11

How to correctly dispose of packaging materials........................................................................11

FAQ..............................................................................................................................................12

ACCESSORIES AVAILABLE UPON REQUEST.....................................................................14

- 3 -

GENERAL DESCRIPTION

All the models in the Mito Sensor lock range are designed to mechanically enable and disable

the door handle. When the "false throw" function is enabled, the handle is 'idle' if there is no

power input and the latchbolt cannot be withdrawn. With power input, the handle is enabled to

open the door; when it is turned, the latchbolt withdraws.

Every lock in this range is:

- non-handed, so it can be installed on both right-hand and left-hand doors;

- equipped with the mechanical hold open function, which is activated by disabling the "false

throw" with the cylinder;

- pre-set to install a light (LED) where: GREEN indicates HANDLE ENABLED TO OPEN, RED

indicates HANDLE NOT ENABLED TO OPEN, as shown below:

FALSE THROW

NOT ENABLED FALSE THROW ENABLED AND

ELECTRICAL IMPULSE NO ELECTRICAL IMPULSE

GREEN LED GREEN LED RED LED

This product can be installed on hinged doors that do not exceed 400 kg in weight, 2500 mm in

height and 1300 mm in width.

N.B.: The lock is not motorised, therefore even when it is electrically powered, the

handle must be turned manually to withdraw the latchbolt.

SUPPLIED PARTS:

Part

no. Description Pieces

1Mito Sensor Lock 1

21.5 m power supply cable 1

- 4 -

INSTALLATION

INTRODUCTION

This manual is an integral part of the product and has been compiled by the manufacturer to

provide everyone authorised to interact with it with the information they may need. Keep this

manual in an easily accessible place for the working life of the product.

SAFETY REGULATIONS

Read the instructions in the installation and user manual carefully.

All installation and maintenance operations which require precise technical expertise or particular

skills must be carried out exclusively by qualied personnel with the relevant qualications and

experience.

The Mito Sensor lock is powered by a 12/24V AC/DC power supply. For more

information, please refer to the section "Power supply characteristics".

Do NOT weld the lock or any part of it.

If there is a momentary power failure:

- the door can always be opened with the key.

- the door can be opened with the handle, independently of whether the "false throw"

is enabled or disabled. Once power is restored, the lock will remain idle until it

receives a new electrical impulse.

- 5 -

INSTALLATION

Do not open the Mito Sensor lock or modify it in any way, otherwise the warranty

will be void.

Before installing the lock in the recess in the door, carry out the following

operations:

• Select the hand using the dedicated lever (as shown in gure 1).

• For left hand installation, move the lever completely towards the letter “L” and release it.

• For right hand installation, move the lever completely towards the letter “R” and release

it.

N.B.: once it is released, the lever will always return to the 'rest' position, as shown in the gure

below:

R L

LEFT

HAND

DOOR

RIGHT

HAND

DOOR

Figure 1: lever for changing “hand”

• Selecting the opening time:

• insert a 2 mm athead screwdriver in the hole shown in gure 2;

• turning clockwise to the end stop (notch II) will set the opening time to 30 s;

• Turning anticlockwise to the end stop (notch I) will set the opening time to 3 s

N.B.: the Mito Sensor lock is factory set for an opening time of approx. 10 s.

Figure 2: timer hole

- 6 -

• If the lock is installed with the optional LED (item 107126100), please see gure 3 for

how to t the connector correctly;

Figura 3: tting the connector

• Place the lock in the recess created in the door, taking care not to force it. Fix the lock

using screws (minimum 5 mm).

• Use a 9 mm square spindle, taking care not to force it when inserting it.

• In the standard versions, make sure that once the spindle is inserted, it goes beyond the

lock follower.

• The MITO SENSOR lock must always be installed together with a cylinder, tted using

the dedicated xing screw.

• Use only cylinders with a DIN cam.

• Use a zinc-plated xing screw for the cylinder: M5 - ISO 7046-1; Length 70 mm or 75 mm

• Check that the striker used does not protrude, preventing the door and lock from

working properly.

• Check there is no friction between the lock latchbolt and the striker. If there is, make the

striker hole larger.

• If there is friction when the lock is tted in the door, do not force it.

• The lock may be installed and operated only after checks have been carried out to

ensure the door has been correctly installed.

• Once installation is complete, lubricate the latchbolt surfaces touching the striker.

- Do not force the handle in the opposite direction to the normal opening one.

- Make sure no foreign bodies, debris from working on the door, packaging/power

supply cable ties or anything else that could interfere with the inner mechanisms

are inserted or get into the lock.

- Make sure the sloping part of the latchbolt touches the striker or the recess on

the frame.

- The distance between the lock faceplate and the door frame and/or the striker

where the latchbolt engages) must be that indicated by the door manufacturer

(minimum 3 mm).

- If the lock or other parts of the door are replaced, always follow the instructions

of the door manufacturer.

  -Donotusethelockwithoutrsthavinginstalledacylinder,ttedusingthe

dedicatedxingscrew.

- 7 -

LOCK CHARACTERISTICS

Power supply voltage 12/24 VDC/VAC

Absorbed current (max)750mA @12VAC (see the table below for all other cases)

Degree of protection IP X0

Operating temperature/humidity...........................................................-10°C / +55°C (95% RH)

Certications .................................................................See "Safety and Regulatory Addendum"

POWER SUPPLY VOLTAGE MAX ABSORBED CURRENT

24 VAC 350 mA

24 VDC 250 mA

12 VAC 750 mA

12 VDC 450 mA

GND

Opening Cmd

Remote LED (optional)

12/24V

- 8 -

FINAL TESTING

CARRY OUT FINALTESTING ONLY WHEN THE LOCK HAS BEEN CORRECTLY FITTED ON

THE DOOR AND WITH THE CYLINDER INSTALLED AND FIXED USING THE DEDICATED

SCREW.

• Enable the "false throw" function by turning the cylinder key in the locking direction:

• check that the LED (if tted) changes from GREEN to RED.

• press down the handle: the latchbolt MUST NOT withdraw;

• Give the electrical impulse to open:

• check that the LED changes from RED to GREEN.

• turn the handle and check that the latchbolt withdraws;

• wait for the end of the electrical impulse (the time will vary depending on the lock timer

setting);

• check that the LED (if tted) changes from GREEN to RED;

• press down the handle, the latchbolt MUST NOT withdraw;

• Disable the "false throw" function by turning the cylinder key in the opening direction:

• check that the LED (if tted) changes from GREEN to RED.

• continue turning the key and check that the latchbolt withdraws, allowing the door to

open;

• again with the "false throw" function NOT enabled, turn the handle and check that the

latchbolt withdraws, allowing the door to open;

REGULATORY COMPLIANCE

The product is compliant with the Construction Products Regulation 305/2011. It is also compliant

with the electromagnetic compatibility directive.

Please refer to the ‘Safety and RegulatoryAddendum’ (included in the pack) for the complete list

of directives/regulations with which the product is compliant.

- 9 -

POWER SUPPLY CABLE CHARACTERISTICS (SUPPLIED)

Pinout

Colour of wire Signal Descriptions

3,5 mm

7 mm

1Red V+ Positive voltage

2Black V- Negative voltage

3Yellow OCMD Opening command

4Blue Remote

LED Remote LED

Use the cable supplied with the lock only.

For instructions on running the power supply cable between the door and the frame,

see the accessory section.

Thecablesuppliedcanbeconnectedwiththeexistingelectricsystem.CISAisnot

responsible for the electrical connections with the rest of the system.

- 10 -

POWER SUPPLY CHARACTERISTICS

A power supply with the following characteristics is recommended:

• CE marked,

• compliant with directives 2014/30/EU, 2014/35/EU Class 2 (double insulation)

• LPS source (in compliance with IEC 62368)

• OVP (overvoltage) and OCP (overcurrent) SELV protection

• UL94-V0 type plastics

• UL Listed or at least UL Recognized product

• in the case of AC power, use the GEWISS GW 96426 power supply

Do not connect the lock directly to the 230V AC mains.

WARNING

• Read these instructions carefully and save them for future use.

• All the data and declarations contained in this sheet replace and supersede those

contained in other sheets.

• Always disconnect the electric system from the mains when connecting the cables or

performing any later work on the lock.

CISA declines all responsibility for damage resulting from the failure to observe

the above warnings

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Allegion Serratura

Allegion

Allegion Falcon S Series Foglio di istruzioni

Allegion

Allegion Kryptonite 815 Combo Manuale utente

Allegion

Allegion interflex IF-261 Manuale utente

Allegion

Allegion CISA MyEVO Manuale utente

Allegion

Allegion Schlage S-480 Manuale utente

Allegion

Allegion CISA 48816 Series Manuale utente

Allegion

Allegion Von Duprin 8875 Manuale utente

Allegion

Allegion Schlage DEADBOLT Manuale utente

Allegion

Allegion FALCON X571 Manuale utente

Allegion

Allegion Olivari PT Series Manuale utente

Allegion

Allegion Briton 9365-990 Manuale utente

Allegion

Allegion BE369 Manuale operativo e di manutenzione

Allegion

Allegion Interflex IF-191 Series Manuale utente

Allegion

Allegion AD-300 Manuale utente

Allegion

Allegion Schlage AD Series Manuale utente

Allegion

Allegion Falcon 25-WDC Manuale utente

Allegion

Allegion Falcon T Series Manuale utente

Allegion

Allegion FALCON LM Series Manuale utente

Allegion

Allegion AD Series Manuale utente

Allegion

Allegion Falcon Series Manuale utente

Allegion

Allegion Dexter DB1000 Deadbolt Standard Guida

Allegion

Allegion Falcon F Series Manuale utente

Allegion

Allegion Legge 990MF Manuale utente

Allegion

Allegion LOCKNETICS CS450 Series Manuale utente

Manuali Serratura popolari di altre marche

Magic

Magic 105 Manuale utente

Gantner

Gantner GAT NET.Lock 7020 System Guida rapida

Wittkopp

Wittkopp Insys 7202 Manuale utente

Dorma

Dorma Studio Classic Manuale utente

Securam

Securam ECSL-601 Manuale utente

Sudhaus

Sudhaus 3003 Manuale utente

Safety 1st

Safety 1st 48517 Manuale utente

Pado

Pado FDS-10 Manuale utente

Esco

Esco systeQ Series Manuale utente

COMPX

COMPX National D8951 Manuale utente

secureo

secureo Key Box Manuale utente

Stock Loks

Stock Loks C8713 Manuale utente

COMPX

COMPX 1T-058 Manuale del proprietario

Auslock

Auslock T11 Manuale utente

ELCOM

ELCOM 7205 Manuale utente

Stealth SAFES

Stealth SAFES ShadowVault Manuale utente

Knox

Knox KeySecure 5 Manuale utente

Kwikset

Kwikset 48334/01 Manuale utente