ALTAI IX500 Manuale utente

Quick Setup Guide

ALTAI IX500 Indoor 2x2

802.11 ac W av e 2 AP

_________________________________________________

Quick Setup Guide

Version 1.0

Quick Setup Guide

Introduction

Thank you for purchasing the ALTAI IX500 product. This guide provides

instructions to install the product and set it up as AP with minimal effort.

Package Contents

Ceiling Mount Base

(15/16” T-Rail)

Ceiling Mount Base

(9/16” T-Rail)

IX500 Main Unit

Quick Setup Guide

Back Cover

(For Indoor Installation)

Dry Wall Mount Kit

-Anchors x 2

-Screws x 2

Back Cover

(For Outdoor Installation)

Optional Items

Wall/Pole Mount Kit

-Mount Base x 1

-Anchors (For Concrete Wall) x 2

-Screws (For Concrete Wall) x 2

-Cable Tie (For Pole) x 2

Quick Setup Guide

Hardware Overview

LED Indicator

Power/Booting

Status

Off

AP Powered Off

Flashing Red

AP Booting Up

Solid Red

AP Boot Up Finished and Ready for Service

2.4G Radio

Enabled Only

(AP/Station/

Repeater)

Solid Purple

1. AP Mode on but with no Client Association; OR

2. Station Mode on but not connected to Remote AP; OR

3. Repeater Mode on but not connected to Remote AP

Alternate Flashing

Purple & Red

Data Transmitting/Receiving

5G Radio

Enabled Only

(AP/Station/

Repeater/Bridge)

Solid Yellow

1. AP Mode on but with no Client Association; OR

2. Station Mode on but not connected to Remote AP; OR

3. Repeater Mode on but not connected to Remote AP; OR

4. Bridge Mode on but not connected to Remote Peer

Alternate Flashing

Yellow & Red

Data Transmitting/Receiving

2.4G and 5G

Radios Enabled

(AP/Station/

Repeater/Bridge)

Solid White

AP/Station/Repeater/Bridge Mode on but with no

connection with Client/Remote AP/Remote Peer

Alternate Flashing

Purple, Yellow & Red

Data Transmitting/Receiving

LED Indicator

Quick Setup Guide

Ethernet Port, DC Power Jack and Reset Button

Ethernet Port:

It is used to connect to power source (see the Power Options in the later

section) and provides 10/100/1000 Mbps network interface for LAN

connection.

DC Power Jack:

It is used to connect to DC power source of 12VDC/1A as another power

option.

Reset Button:

Ethernet Port

Reset Button

DC Power

Jack

Mount

Base Slot

Red LED Indicator

1-2s

5-8s

Factory Reset

Reboot

It serves two functions:

Reboot: Press and hold the

Reset Button for 2-3 seconds

until the red LED blinks once.

Factory Reset: Press and hold

the Reset Button for 5-8

seconds until the red LED

blinks twice consecutively.

Quick Setup Guide

Mounting Options

Option 1: T-Rail Ceiling Mount (9/16” T-Rail OR 15/16” T-Rail)

Insert an appropriately sized ceiling rail

into one of the mount base slots first. Then

turn the AP slightly so that the rail slips into

another slot to lock the AP into place.

Select an appropriate ceiling

mount base (9/16” or 15/16”)

and slide the base into the

slot of the AP.

Quick Setup Guide

Option 2: Wall Mount (Concrete Wall)

Determine where the AP is to be placed and mark location on the

wall surface for the two mounting holes of the mount base. Use an

appropriate drill bit to drill holes of 1/3”(8.1mm) diameter and 1”

(26mm) deep. Screw the anchors into the holes and then insert the

screws through the mount base to the anchors to attach the base to

the wall.

Slide the base into the

slot of the AP.

Quick Setup Guide

Option 3: Pole Mount (For 1 inch to 3 inches of pole diameter)

Thread the open end of the

cable tie through the two

slots of the mount base.

Slide the base into

the slot of the AP.

Determine where the AP is to be placed. Tighten

the cable tie to secure the base to the pole.

Quick Setup Guide

Setup Requirements and Preparation

A computer with Web Browser: Google Chrome, Mozilla Firefox, or

Microsoft Internet Explorer 8 (or above)

Two Cat 5e/6 Ethernet cables

802af/at-compliant PoE switch (54Vdc/0.6A)

AltaiCare account (Optional) for cloud AP management and user service

Power Options and Cable Connection Instructions

1. Connect the IX500 Ethernet port to an 802.3af/802.at-compliant PoE switch

with an Ethernet Cable.

2. Connect a computer to the switch.

3. Make sure the LED indicator turns into a solid light for AP configuration.

802.3af/802.at –Compliant

PoE Switch

IX500 AP

Ethernet Cable

(PoE + Data)

Ethernet Cable

(Data)

Quick Setup Guide

1. Change TCP/IP Setting on Your Computer

For Windows 7 users,

1. Go to Control Panel, click Network and Sharing Center and then choose

the adapter that you want to connect to IX500 unit. In this example,

adapter “Local Area Connection” is in connection with IX500-S. Click it

and then click Properties.

2. Under the Networking tab, click Internet Protocol Version 4 (TCP/IPv4) in

the list box “This connection uses the following items”, and then click

Properties.

3. Type in the following IP address and Subnet mask:

IP address: 192.168.1.2

Subnet mask: 255.255.255.0

4. Click OK to close the Internet Protocol Version 4 (TCP/IP) Properties dialog

box and click OK again to close the Local Area Connection Properties

dialog box.

Quick Setup Guide

2. Access to Web Interface

1. Open a web browser. Type 192.168.1.222 in the address bar and then hit

Enter.

2. Login page will come up and you are required to enter username and

password. By default, the credentials are:

Username: admin

Password: admin

3. Click Login.

Indice

Altri manuali ALTAI Punto di accesso wireless

ALTAI

ALTAI A175FD Manuale utente

ALTAI

ALTAI CX200 Manuale utente

ALTAI

ALTAI C2s Manuale utente

ALTAI

ALTAI AX500 Series Manuale utente

ALTAI

ALTAI CX200 Manuale utente

ALTAI

ALTAI C260 Manuale utente

ALTAI

ALTAI A2C Manuale utente

ALTAI

ALTAI A2 Manuale utente

ALTAI

ALTAI C2s Manuale utente

ALTAI

ALTAI A3 Series Manuale utente

ALTAI

ALTAI A2 Foglio di istruzioni

ALTAI

ALTAI A2N Foglio di istruzioni

ALTAI

ALTAI A3-Ei Manuale utente

Manuali Punto di accesso wireless popolari di altre marche

D-Link

D-Link DWL-2100AP - AirPlus Xtreme G Manuale utente

Ubiquiti

Ubiquiti NanoStation NSM2 Manuale utente

Cisco

Cisco Aironet 1550 Series Manuale utente

Aruba

Aruba IAP-335 Manuale utente

Advantek Networks

Advantek Networks AWN-AP-54MR Manuale utente

IP-COM

IP-COM AP355 Manuale utente

Buffalo

Buffalo AirStation WLA-L11G Manuale utente

EnGenius

EnGenius EnStationACv2 Manuale utente

D-Link

D-Link DAP-3662 Manuale utente

xG Technology

xG Technology xMax CN1300 Manuale utente

Widelink

Widelink ezWave WAP-1100 Series Manuale utente

Edimax

Edimax CAP1200 Manuale utente

Ubiquiti

Ubiquiti LBE-5AC-Gen2 Manuale utente

Aruba

Aruba AP-203R Manuale utente

LuXout Shades

LuXout Shades LUXSHADE MOTION Manuale utente

CreatComm

CreatComm TB5F Manuale utente

SineDigital

SineDigital MW-1500AP(H) Manuale utente

TP-Link

TP-Link AP9650 V1 Manuale utente