AMD LE-363 Manuale utente
LE-363
3.5 inch Embedded Motherboard
User’s Manual
Edition 1.0
2005/9/16
LE-363 User’s Manual
2
Copyright
Copyright 2004 - 2005. All rights reserved. This document is copyrighted and all rights are
reserved. The information in this document is subject to change without prior notice to
make improvements to the products.
This document contains proprietary information and protected by copyright. No part of this
document may be reproduced, copied, or translated in any form or any means without prior
written permission of the manufacturer.
All trademarks and/or registered trademarks contains in this document are property of their
respective owners. Disclaimer
The company shall not be liable for any incidental or consequential damages resulting from
the performance or use of this product.
The company does not issue a warranty of any kind, express or implied, including without
limitation implied warranties of merchantability or fitness for a particular purpose.
The company has the right to revise the manual or include changes in the specifications of
the product described within it at any time without notice and without obligation to notify any
person of such revision or changes.
Trademark
All trademarks are the property of their respective holders.
Any questions please visit our website at http://www.commell.com.tw
LE-363 User’s Manual
3
Packing List
Please check the package before you starting setup the system
Hardware:
LE-363 little board x 1
Cable Kit:
44-pin
40-pin
44-pin
44-pin ATA33 IDE Cable x 1
USB Cable x 1
COM port & Printer Port Cable x 1
PS/2 keyboard & mouse cable x 1
Audio Cable x 1 Floppy Cable x 1
1 to 3 power
output cable
Other Accessories:
Divers CD (including User’s Manual) x 1
Printed User’s Manual x 1
LE-363 User’s Manual
4
Index
Chapter 1 <Introduction>...............................................................6
1.1 <Product Overview> ......................................................................6
1.2 <Product Specification>.................................................................7
1.3 <Mechanical Drawing>..................................................................9
1.4 <Block Diagram>.........................................................................10
Chapter 2 <Hardware Setup> ......................................................11
2.1 <Connector Location>..................................................................11
2.2 <Jumper Location & Reference>.................................................12
2.3 <Connector Reference>................................................................13
2.3.1 <Internal Connector> ........................................................13
2.3.2 <External Connector> .......................................................13
2.4 <CPU & Memory Setup>.............................................................14
2.4.1 <CPU>...............................................................................14
2.4.2 <Memory>.........................................................................14
2.5 <CMOS Setup>............................................................................15
2.6 <Enhanced IDE & CF Interface>.................................................16
2.7 <Floppy Port>...............................................................................17
2.8 <Ethernet Interface>.....................................................................18
2.9 <Onboard Display Interface>.......................................................19
2.10 <Onboard Audio Interface> .......................................................26
2.11 <Serial Port>...............................................................................27
2.12 <GPIO Interface>.......................................................................28
2.13 <Power Supply>.........................................................................29
2.13.1 <Power Input>.................................................................29
2.13.2 <Power Output>..............................................................29
2.14 <Switch and Indicator>..............................................................30
Chapter 3 <BIOS Setup>..............................................................31
Appendix A <I/O Pin Assignment>..............................................33
A.1 <IDE Port> ..................................................................................33
LE-363 User’s Manual
5
A.2 <Floppy Port>..............................................................................34
A.3 <IrDA Port>.................................................................................34
A.4 < VGAPort >...............................................................................34
A.5 <Serial Port>................................................................................35
A.6 <LAN Port>.................................................................................35
A.7 <PS/2 Keyboard & Mouse Port>.................................................35
A.8 < USB Interface >........................................................................35
A.9 < LPT Prot >……………………………………………..36
Appendix B <Flash BIOS>...........................................................37
B.1 BIOS Auto Flash Tool ............................................................37
B.2 Flash Method..........................................................................37
Appendix C <System Resources>..............................................39
C.1 <I/O Port Address Map> .............................................................39
C.2 <Memory Address Map>.............................................................41
C.3 <System IRQ & DMA Resources> .............................................42
C.3.1 <IRQ>...............................................................................42
Appendix D <Programming GPIO’s>..........................................43
Appendix E <Programming Watchdog Timer > .........................44
Contact Information .....................................................................45
LE-363 User’s Manual Introduction
Chapter 1 <Introduction>
1.1 <Product Overview>
LE-363 is the 3.5 inches embedded motherboard with AMD Geode GX533 platform, with
onboard VGA, AC97 audio, dual LAN and DC 12V input interface. Based on the AMD
Geode GX533 processor, the board provides many advanced features for reduced power
consumption, fanless design and high cost/price rate of production.
Low Power Consumption
Based on the AMD Geode GX533@400MHz processor onboard, it only takes up to 8.4W
at maximum powering, and is completely suitable for fanless design. Without any cooling
fan onboard, it can avoid the heat problem when the cooler failed in accidence.
Onboard TTL/LVDS LCD interface
Based on the AMD Geode GX533@400Mhz of integrated graphics, the board provides
onboard graphics with up to 4/8/12/16 MB of frame buffer, 18-bit/24-bit LVDS and 24-bit
TTL interfaces.
Embedded Component
Due to the low profile design, the board provides PCMICA card Bus, CF card socket for
flash disk with porting embedded OS and up to 512MB of DDR SO-DIMM.
Single Voltage Input
The board only requires DC 12V input; user’s can easily connect the board with an adapter
without the huge power supply.
Product Overview
6
LE-363 User’s Manual Introduction
1.2 <Product Specification>
General Specification
Form Factor 3.5 inches embedded motherboard
CPU Embedded AMD Geode GX533 400MHz
Fanless with heatsink only
Memory 1 x 200-pin DDRSO-DIMM up to 512MB
Unbufferred, none-ECC memory supported only
Chipset AMD Geode CS5535
USB Port Two internal USB1.1 ports
BIOS Phoenix-Award PnP flash BIOS
Green Function Power saving mode includes doze, standby and suspend modes.
ACPI version 1.0 and APM version 1.2 compliant
Watchdog Timer System reset programmable watchdog timer
Real Time Clock Chipset built-in RTC with lithium battery
Enhanced IDE One Ultra DMA33 IDE interface supports up to 2 ATAPI devices
One 44-pin IDE port onboard
Multi-I/O Port
Chipset WINBOND W83627HF
Serial Port One external RS232 and one internal RS232
Parallel Port One 26-pin internal parallel port
Floppy Port One slim type Floppy port
IrDA Port One IrDA compliant Infrared interface supports SIR
K/B & Mouse External PS/2 keyboard and mouse ports on rear I/O panel
GPIO One 12-pin Digital I/O connector with 8-bit programmable I/O
interface
Hardware
Monitor Fan speed, CPU temperature and voltage monitoring
VGA Display Interface
Chipset AMD Geode GX533 built-in VGA controller with 2D engine
Memory BIOS selectable up to 4/8/12/16 MB shard with system memory
Display Type CRT, LCD monitor with analog display
18-bit/24-bit LVDS/24-bit TTL with LCD interface
Connector External DB15 female connector on rear I/O panel
Onboard 40-pin TTL connector
Onboard 40-pin LVDS connector
Onboard 5-pin backlight inverter connector
Solid State Disk Interface
Compact Flash 1 x Compact Flash Card Type I socket on solder side
DOM Onboard 44-pin IDE support DOM (Disk On Module)
PCMCIA Card PCMICA Type I/II slot
Product Specification 7
LE-363 User’s Manual Introduction
Ethernet Interface
Controller Dual PCI based REALTEK 8100B controller
Type 10Base-T / 100Base-TX, auto-switching Fast Ethernet
Full duplex, IEEE802.3U compliant
Connector Two external RJ45 jack on I/O panel
Audio Interface
Controller REALTEK ALC201A AC97 codec
Output Interface Line-in, Line-out, CD-in, MIC-in
Connector Onboard 10-pin header
Expansion Interface
Mini PCI Onboard Mini PCI socket for Type III (32bit,33Mhz)
Power and Environment
Power
requirement DC 12V input
1 x DC jack on I/O panel
1 x Onboard 4-pin 12V DC connector
Input Voltage 10.5V ~ 13V
Input Current 12V/0.7A 8.4W (board only)
Dimension 146mm x 101mm (L x W)
Temperature Operating within 0 ~ 60oC (32 ~ 140oF)
Storage within -20 ~ 85oC (-4 ~ 185oF)
Driver support
Windows Windows XP/XPe, Win2000 and WinCE
Linux Kernel version 2.4 or later
Ordering Code
LE-363P 3.5 inches embedded motherboard with onboard AMD GX533
400MHz processor, VGA, audio, dual LAN, USB, CF, TTL/LVDS
PCMAIC ,Mini PCI , GPIO
LE-363-128 Same as LE-363P and with onboard DDR 128M
Product Specification
8
LE-363 User’s Manual Introduction
1.3 <Mechanical Drawing>
Mechanical Drawing 9
LE-363 User’s Manual Introduction
1.4 <Block Diagram>
AMD Geode GX533 Processor
VGA monitor
TTL/LVDS LCD
DDR SO-DIMM up to 512MB
8100B
PCI/33Mhz
Mini PCI slot
PCMCIA
Arbitor
IT8209
8100B
CS5535
USB1.1 X 2
AC97 Audio
GPIO
Floppy
Serial Port
Parallel Port
Ultra DMA33 IDE
IrDA
BIOS
Block Diagram
10
Altri manuali per LE-363
1
Indice
Altri manuali AMD Scheda madre
Manuali Scheda madre popolari di altre marche
Telit Wireless Solutions
Telit Wireless Solutions SL869-3DR Manuale utente
Gigabyte
Gigabyte GA-9IVDT Manuale utente
Texas Instruments
Texas Instruments ADS8372EVM Manuale utente
Commell
Commell MS-C73 Manuale utente
IBT Technologies
IBT Technologies MB860 Manuale utente
Nvidia
Nvidia TEGRA DG-04927-001_V01 Manuale utente
