4 INSTALLATION
4.1 General Warnings
These instructions have been designed to assist users of the OTS-EL with installation.
Before the OTS-EL can be installed, there are a number of things that need to be considered and
understood to prevent incorrect or unsafe operation of the OTS-EL or the system into which it is
installed.
Along with relevant competence, and an understanding of the target application, the following points
should be considered:
4.1.1 Ensure that the information provided in this user manual is fully understood.
It is extremely important that the limitations and functionality of the OTS - EL are understood to prevent
incorrect installation or use, creating a potentially dangerous risk. If in doubt as to the nature of the
limitations or their implication, consult a competent authority such as a supervisor or Ampcontrol
technical representative.
4.1.2 Ensure that the application into which the OTS-EL is being installed has been
properly defined, designed and approved.
Any system intended to mitigate the risk of injury needs to be properly designed and implemented.
Such a system must be the result of structured risk analysis with the outcomes used to define the
system requirements. These requirements, in turn, will guide the choice of instrumentation, logic
solvers and actuators needed to implement the system. Understanding the needs of the system will
ensure proper selection of equipment.
4.1.3 Ensure that the OTS-EL will properly perform the required functions within the
system design.
It is important to understand how the OTS-EL is intended to interact with other equipment within a
system. For safe and reliable use, it is crucial that neither the OTS-EL logical operation nor its
signalling be compromised by incompatibilities with connected equipment.
4.1.4 Modifications of any form to the Outlet Test System are prohibited.
If modifications of any form are made to the OTS-EL, the equipment may no longer be fit for use. If any
modifications or damage to the OTS-EL is evident, do not use the equipment and contact Ampcontrol
for advice.
4.2 Mandatory Installation Practices
The following information must be adhered to when installing the OTS-EL. Failure to adhere to this
information may give rise to unsafe operation.
Using the OTS-EL in a manner that exceeds its electrical or functional specifications, or in a way that is
contrary to its operating restrictions, may create risks to personnel and/or equipment resulting in injury or
death.
The OTS-EL must be supplied by a regulated voltage within the specified range.
The installation of the OTS-EL must be carried out by suitably trained and qualified personnel.
Identification labels fixed to the OTS-EL must not be damaged, removed or covered.
The installation is to be in accordance with the relevant installation Standards/Codes of Practice.
Modifications must not be made to any part of the OTS-EL. Modifications to its construction will
render the unit non-compliant.
Complete and accurate records of the installation must be retained for warranty purposes.
