AMX RDA-CKM Istruzioni per il montaggio

Questo manuale è adatto per i seguenti modelli

1

Manuali Unità di controllo popolari di altre marche

Festo

Festo Compact Performance CP-FB6-E Manuale elenco delle parti

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Manuale utente

JS Automation

JS Automation MPC3034A Manuale utente

JAUDT

JAUDT SW GII 6406 Series Guida rapida

Spektrum

Spektrum Air Module System Manuale utente

BOC Edwards

BOC Edwards Q Series Manuale utente

KHADAS

KHADAS BT Magic Manuale utente

Etherma

Etherma eNEXHO-IL Manuale utente

PMFoundations

PMFoundations Attenuverter Manuale utente

GEA

GEA VARIVENT Manuale utente

Walther Systemtechnik

Walther Systemtechnik VMS-05 Manuale utente

Altronix

Altronix LINQ8PD Istruzioni per il montaggio

Eaton

Eaton Powerware Series Manuale utente

WAGO

WAGO 750-407/040-000 Manuale utente

Sony

Sony CCU-590 Manuale utente

Graco

Graco 25D614 Manuale utente

Task Force Tips

Task Force Tips YE-RF-900 Manuale di programmazione

Shini

Shini SPV-U Series Manuale utente

Installation Sheet

RDA-CKM Dual Choke Module

The RDA-CKM Dual Choke Module is used for debuzzing, lamp noise

reduction, and to correct minor common neutral interactions. This unit con-

sists of dual 350 µS rise time chokes. It occupies only one enclosure space

and is useful with the RDD-DM series of integrated dimmer modules. The

module's 120 and 240-277 VAC ratings are UL and C-UL approved.

RDA-CKM UL and C-UL Ratings:

Input:

• 120 VAC, 50/60 Hz, 2400 W

• 240-277 VAC, 50/60 Hz, 2400 W

Specifications:

• Dimensions (HW): 10.0" x 2.75" (254.00 mm x 69.85 mm)

• Use wires rated at 75°C (167°F)

• Torque terminals to 7 in-lbs (0.8 N/M)

• Max. wire size: 10 AWG (4 mm²)

• Wire stripping length: 0.28" (7 mm)

• Weight: 6.5 lbs (2.95 kg)

• BTU/hr: 300

Suggested Loads:

• Incandescent

• Low-voltage

• Neon, cold-cathode

Caution Pre-Installation Notes:

• All Class 1 wiring must be connected to proper terminals.

• All control wiring must be connected to proper terminals.

• Disconnect power while installing or connecting the unit.

• Keep top and bottom air vents clear at all times.

• Test loads for shorts before connecting.

• Use low-voltage wires with a 300 volt rating or greater.

• Use field-installed copper conductors.

• Run all low-voltage and control wires away from heat producing parts

of the dimmer.

• Each dimming circuit must have a separate neutral connection.

• All electrical ratings are for continuous duty.

• For indoor use only.

• AC lighting loads only.

FIG. 1 RDA-CKM

Mounting points

Mounting points

Line In (hot)

Load out

350 µS Choke

High-voltage

connections

AMX Corporation reserves the right to alter specifications without notice at any time.

For full warranty information, refer to the AMX Instruction Manual(s) associated with your Product(s).

043-019-2298 10/01 ©2001 AMX Corporation. All rights reserved.

The AMX logo is a trademark of AMX Corporation. AMX Corporation reserves the right to alter specifications without notice at any time.

3000 research drive, richardson, TX 75082 USA • 469.624.8000 • 800.222.0193 • fax 469.624.7153 • technical support 800.932.6993

Lighting Application Drawings

FIG. 2 Method A

Method A

120 VAC, 1Ø /

External choke, line side

configuration