Analog Devices ICE-100B Manuale utente
ICE-100B Emulator
User Guide
Revision 1.0, September 2009
Part Number
82-000225-01
Analog Devices, Inc.
One Technology Way
Norwood, Mass. 02062-9106 a
Copyright Information
©2009 Analog Devices, Inc., ALL RIGHTS RESERVED. This document
may not be reproduced in any form without prior, express written consent
from Analog Devices, Inc.
Notice
Analog Devices, Inc. reserves the right to make changes to or to discon-
tinue any product or service identified in this publication without notice.
Analog Devices assumes no liability for Analog Devices applications assis-
tance, customer product design, customer software performance, or
infringement of patents or services described herein. In addition, Analog
Devices shall not be held liable for special, collateral, incidental or conse-
quential damages in connection with or arising out of the furnishing,
performance, or use of this product.
Analog Devices products are not intended for use in life-support
applications, devices, or systems. Use of an Analog Devices product in
such applications without the written consent of the appropriate Analog
Devices officer is prohibited.
Users are restricted from copying, modifying, distributing, reverse
engineering and reverse assembling or reverse compiling the Analog
Devices emulator operational software (one copy may be made for
back-up purposes only).
Trademark and Service Mark Notice
The Analog Devices logo, VisualDSP++, Blackfin, TigerSHARC,
SHARC, the CROSSCORE logo, EZ-KIT Lite, and EZ-ICE are regis-
tered trademarks are registered trademarks of Analog Devices, Inc.
All other brand and product names are trademarks or service marks of
their respective owners.
Regulatory Compliance
ICE-100B emulators are designed to be used solely in a laboratory envi-
ronment. The emulator is not intended to be used in any end products or
as a portion of an end product. The emulators may cause interference to
other electronic devices operating at close proximity. The emulators
should not be used in or near any medical equipment or RF devices.
The ICE-100B emulators have been certified to comply with the essential
requirements of the European EMC directive 89/336/EEC (inclusive
93/68/EEC) and, therefore, carries the “CE” mark.
The ICE-100B emulators have been appended to
Analog Devices Development Tools Technical
Construction File referenced “DSPTOOLS1” dated
December 21, 1997 and was awarded CE Certifica-
tion by an appointed European Competent Body
and is on file.
The ICE-100B emulator contains ESD (electrostatic discharge) sensitive
devices. Electrostatic charges readily accumulate on the human body and
equipment and can discharge without detection. Permanent damage may
occur on devices subjected to high-energy discharges. Proper ESD precau-
tions are recommended to avoid performance degradation or loss of func-
tionality. Store unused ICE-100B emulators in the protective shipping
package.
ICE-100B Emulator User Guide v
PREFACE
Purpose of This Manual ................................................................ viii
Intended Audience ........................................................................ viii
Manual Contents .......................................................................... viii
Technical and Customer Support ..................................................... ix
GETTING STARTED
Contents of Emulator Package ....................................................... 1-2
PC Configuration ......................................................................... 1-2
USB Installation Tasks .................................................................. 1-2
Verifying Driver Installation .................................................... 1-4
Attaching to the Emulation Target ................................................. 1-6
VisualDSP++ Configurator ............................................................ 1-8
JTAG Frequency ........................................................................... 1-8
Troubleshooting and Warranty Information ................................... 1-9
HARDWARE DESCRIPTION
LEDs ............................................................................................ 2-1
Resetting the Target ...................................................................... 2-2
To Reset the Target ................................................................. 2-3
CONTENTS
vi ICE-100B Emulator User Guide
Designing Custom Processor Boards .............................................. 2-4
Mechanical Specifications ............................................................. 2-4
SUPPORT
Technical Support ......................................................................... 3-1
Quality Assurance ......................................................................... 3-2
REFERENCES
INDEX
ICE-100B Emulator User Guide vii
PREFACE
Thank you for purchasing the ICE-100B Emulator. The ICE-100B
emulator is used in conjunction with the VisualDSP++®development
environment to create, test, and debug advanced processor application
software on Analog Devices Blackfin®processors.
The ICE-100B emulator provides state-of-the-art support for
JTAG-compliant Analog Devices processors. Key features of the
ICE-100B emulator include:
• Plug-n-Play, USB 2.0 compliant
• High-speed USB device
• USB bus-powered device
•Windows
®XP or Windows Vista operation
• Multiple processor I/O voltage support
1.8V, 2.5V, and 3.3V compliance
• Multiprocessor support
• JTAG clock operation of 5 MHz
Analog Devices carries a wide range of in-circuit emulation products.
To learn more about Analog Devices emulators, go to:
http://www.analog.com/processors/
Purpose of This Manual
viii ICE-100B Emulator User Guide
Purpose of This Manual
The ICE-100B Emulator User Guide provides directions for installing the
ICE-100B hardware and software on your PC. The manual also describes
how to configure and use the components of the ICE-100B emulators.
Intended Audience
This manual is intended to help the customer understand the features and
operation of the ICE-100B emulator so they can begin using
VisualDSP++.
Manual Contents
The manual consists of:
• Chapter 1, “Getting Started” on page 1-1
Provides software and hardware installation procedures, PC system
requirements, and basic board information.
• Chapter 2, “Hardware Description” on page 2-1
Provides information on hardware aspects of the ICE-100B
emulator.
• Chapter 3, “Support” on page 3-1
Provides technical support contact information.
• Chapter 4, “References” on page 4-1
Provides information on different resources available in developing
an application based on an Analog Devices processor.
ICE-100B Emulator User Guide ix
Preface
Technical and Customer Support
You can reach Analog Devices, Inc. Customer Support in the following
ways:
• Visit the Embedded Processing and DSP products Web site at
http://www.analog.com/processors/technical_support
• E-mail tools questions to
• E-mail processor questions to
• Phone questions to 1-800-ANALOGD
• Contact your Analog Devices, Inc. local sales office or authorized
distributor
• Send questions by mail to:
Analog Devices, Inc.
One Technology Way
P.O. Box 9106
Norwood, MA 02062-9106
USA
Technical and Customer Support
x ICE-100B Emulator User Guide
Indice
Altri manuali Analog Devices Hardware per computer
Analog Devices
Analog Devices EVAL-ADAU1860 Manuale utente
Analog Devices
Analog Devices ADSP-2106x SHARC Manuale utente
Analog Devices
Analog Devices EZ-KIT Lite ADSP-21364 Guida utente
Analog Devices
Analog Devices ADT7460 Manuale utente
Analog Devices
Analog Devices AD9866 Manuale utente
Analog Devices
Analog Devices ADSP-2181 Manuale utente
Analog Devices
Analog Devices MAX22005 Manuale utente
Analog Devices
Analog Devices ADAV4622 Manuale utente
Analog Devices
Analog Devices AD7194 Manuale utente
Analog Devices
Analog Devices EV-RPG2 Manuale utente
Analog Devices
Analog Devices ADSP-2186 Manuale utente
Analog Devices
Analog Devices ADM1060 Manuale utente
Analog Devices
Analog Devices iSensor ADIS/EVAL/USB Manuale di istruzioni
Analog Devices
Analog Devices EZ-Extender PWM 180-Pin Manuale utente
Analog Devices
Analog Devices EVAL-ADF4152HVEB1Z Manuale utente
Analog Devices
Analog Devices adsp-2100 Manuale utente
Analog Devices
Analog Devices ADSP-219 Series Guida all'applicazione
Analog Devices
Analog Devices MAX77831 Manuale utente
Analog Devices
Analog Devices LTC6955 Guida rapida alla configurazione
Analog Devices
Analog Devices Linear ADI Power LT1964 Guida rapida alla configurazione
Manuali Hardware per computer popolari di altre marche
EMC2
EMC2 VNX Series Manuale del proprietario
Panasonic
Panasonic DV0PM20105 Manuale utente
Mitsubishi Electric
Mitsubishi Electric Q81BD-J61BT11 Manuale utente
Gigabyte
Gigabyte B660M DS3H AX DDR4 Manuale utente
Raidon
Raidon iT2300 Manuale utente
National Instruments
National Instruments PXI-8186 Manuale utente
