Analog Devices DC2510A Guida rapida alla configurazione

dc2510afa

DEMO MANUAL

DC2510A

DESCRIPTION

Shield Board for Use with

DC2321A Dust Demo Board

Demonstration circuit DC2510A is a shield board for use

with the DC2321A Dust

application demo board. This

board is designed to allow users to build their own custom

application circuits directly on the DC2321A with access

to all pins of the LTP5901-IPM Dust mote.

The board offers footprints of common sensor and IC

packages as well as prototyping space for routing. The

following footprints are included on the board:

TOP BOTTOM

n MSSOP-10 (×2) n SOT-23 (×4)

n TS8 (×2) n TSOT-23-8 (×2)

n SOIC-20 (×2) n SSOP-20 (×2)

n DFN-20 (×2)

Power rails and grids of copper pads (in both 2mm and

2.54mm pitch) form a solderable breadboard, and the IC

footprints allow easymounting of surface-mount packages.

Each pin on the footprints and headers also connects to

a copper-plated hole for easy wiring.

L, LT, LTC, LTM, Linear Technology, the Linear logo and Dust are registered trademarks of

Analog Devices, Inc. All other trademarks are the property of their respective owners.

BOARD PHOTO

The headers on the board are designed to fit into the

LTP5901-IPM header layout on the DC2321A. The long

pins of the headers allow wiring below the board and give

users a place to clip grabber leads.

Theheadersarealsostackable,allowingmultipleDC2510A

boards to be connected vertically, all with access to the

pins on the DC2321A. This allows a user to create different

applications on multiple DC2510A boards and swap them

out or combine them as desired.

Please refer to the DC2321A demo manual and

LTP5901-IPM data sheet for operation information and

input limits. The application section of this demo manual

describes the system level functionality of this board and

the various ways it can be used in early design prototyping.

Design files for this circuit board are available at

http://www.linear.com/demo/DC2510A

Figure 1. DC2510A

dc2510afa

DEMO MANUAL

DC2510A

ABSOLUTE MAXIMUM RATINGS

SPECIFICATIONS

Supply Voltage on VSUPPLY................................................................................................................................ 4.20V

Input Voltage on ADC Inputs.................................................................................................................................1.98V

Voltage on Any Digital I/O Pin...............................................................................................–0.3V to VSUPPLY + 0.3V

PIN TYPE PIN PARAMETER MIN

TYPICAL/

DEFAULT MAX UNITS

Power VSUPPLY 2.1 3.3 3.76 V

I/O

ADCs Input Voltage Range 0 1.8 V

GPIO,

UART,

I2C,

SPI

Low Input Voltage –0.3 0.6 V

High Input Voltage VSUPPLY

–0.3

VSUPPLY

+0.3

Low Output Voltage 0.4 V

High Output Voltage VSUPPLY

–0.3

VSUPPLY

+0.3

Pull-Up/Pull-Down Resistance 50 kΩ

Figure 2. Board Layout Organization Diagram

dc2510afa

DEMO MANUAL

DC2510A

SPECIFICATIONS

Figure 3. DC2510A Top Assembly Drawing

dc2510afa

DEMO MANUAL

DC2510A

SPECIFICATIONS

Figure 4. DC2510A Bottom Assembly Drawing

dc2510afa

DEMO MANUAL

DC2510A

QUICK START PROCEDURE

Instructions

To use DC2510A, you will need to connect a sensor to the

board. This device can be soldered onto the grid of copper

pads, attached to one of the provided SMD footprints, or

inserted into the headers directly (if it is a through-hole

part such as a thermistor).

There are a few inputs and interfaces for receiving data:

1. UART

2. I2C

3. SPI

4. ADC (×4)

5. GPIO (×4 default, up to 18)

Table 1 shows which of these inputs can be read from

the DC2321A GUI through the Mote Measurement Set-

tings dialog. This allows users to start taking sensor

measurements out-of-the-box without reprogramming

the DC2321A. However, any of these inputs can be used

if a custom program is written.

Some sensors can output a voltage that is suitable for ADC

measurements (ADC abs max = 1.98V), or may have an

integrated serial port. However, other sensors may require

an additional ICto read the measurement andcommunicate

with the mote.

General Notes

•The copper rails on DC2510A are not connected to

anything by default, and must be wired by the user.

•SMD footprints on the top and bottom of the PCB share

plated holes. Only one IC per each set of plated holes

should be populated at any time.

• Do not connect USB power to any pin on the mote.

• Pull-up resistors should be pulled to VSUPPLY.

•Any input with a voltage applied when VSUPPLY is not

powered can power the mote through a sneak path.

Combining Application Circuits

Because DC2510A is stackable, a user can make custom

applications on several different boards and connect all

of the boards together to combine the circuits. This can

be useful if a user runs out of routing space on a board,

or if an additional SMD footprint is needed.

Additionally, if a different GPIO pin is tied high on each of

these boards, data from these circuits can be read from

a single program which checks the state of a GPIO to

determine if a particular sensor circuit is present.

SMD Soldering Instructions

The footprints for U3 and U4 allow ICs with GND paddles

to be mounted using a soldering iron rather than a heat

gun. The recommended procedure is as follows:

1. Place the IC onto the footprint as it will be soldered;

solder the four corner pins into place on the copper

pads.

2. Turn the board over and touch the soldering iron to both

the paddle and the plated hole. Quickly apply solder to

the junction.

3. Turnthe board back to the original orientationand solder

the rest of the pins.

4. Wire the paddle to its destination on the board.

5. Wire the pins to their destinations on the board.

dc2510afa

DEMO MANUAL

DC2510A

QUICK START PROCEDURE

Table 1. Inputs and Interfaces Key

Pin Type Pin Function Readable Though GUI Notes

Power

GND – –

5VUSB No –

3V3USB No –

VSUPPLY Yes Abs Max is 4.20V

Serial

Communication

UART No –

I2CYes –

SPI No Remove R1 on DC2321A to Free SS

Input/Output ADC Yes Full-Scale Voltage is 1.8V, Abs Max is 1.98V

GPIO No –

Figure 5. DC2321A Routing Guide

dc2510afa

DEMO MANUAL

DC2510A

PARTS LIST

ITEM QTY REFERENCE PART DESCRIPTION MANUFACTURER/PART NUMBER

Required Circuit Components

1 2 J4, J6 2×16, 2mm PITCH, VERTICAL STACKABLE SOCKET SAMTEC, ESQT-116-02-GF-D-310

2 1 J5 2 PIN, 2mm PITCH, VERTICAL STACKABLE SOCKET SAMTEC, ESQT-102-02-GF-S-310

3 1 --- FAB, PRINTED CIRCUIT BOARD DEMO CIRCUIT 2510A-1

dc2510afa

DEMO MANUAL

DC2510A

SCHEMATIC DIAGRAM

D D

C C

B B

A A

FOR USE WITH DC2321A DUST DEMOBOARD

BOARD DIMENSIONS: 2.5" x 1.75"

SURFACE MOUNT

SPACE 1

SURFACE MOUNT

SPACE 2

SURFACE MOUNT

SPACE 3

FRONT BACK FRONT BACK

FRONT BACK

SOT-23 (x2)

TSOT23-8L (x1)

SOT-23 (x2)

TSOT23-8L (x1)

SOIC-20 (x2) MSOP-10L (x1)

TS8 (x1)

SSOP-20 (x2)

MSOP-10L (x1)

TS8 (x1)

SIZE

DATE:

IC NO. REV.

SHEET OF

TITLE:

APPROVALS

PCB DES.

APP ENG.

TECHNOLOGY Fax: (408)434-0507

Milpitas, CA 95035

Phone: (408)432-1900

1630 McCarthy Blvd.

LTC Confidential-For Customer Use Only

CUSTOMER NOTICE

LINEAR TECHNOLOGY HAS MADE A BEST EFFORT TO DESIGN A

CIRCUIT THAT MEETS CUSTOMER-SUPPLIED SPECIFICATIONS;

HOWEVER, IT REMAINS THE CUSTOMER'S RESPONSIBILITY TO

VERIFY PROPER AND RELIABLE OPERATION IN THE ACTUAL

APPLICATION. COMPONENT SUBSTITUTION AND PRINTED

CIRCUIT BOARD LAYOUT MAY SIGNIFICANTLY AFFECT CIRCUIT

PERFORMANCE OR RELIABILITY. CONTACT LINEAR

TECHNOLOGY APPLICATIONS ENGINEERING FOR ASSISTANCE.

THIS CIRCUIT IS PROPRIETARY TO LINEAR TECHNOLOGY AND

SCHEMATIC

SUPPLIED FOR USE WITH LINEAR TECHNOLOGY PARTS.

SCALE = NONE

www.linear.com

DEMO CIRCUIT 2510A

DC2510A: SHIELD BOARD

N/A

12 - 8 - 15

SIZE

DATE:

IC NO. REV.

SHEET OF

TITLE:

APPROVALS

PCB DES.

APP ENG.

TECHNOLOGY Fax: (408)434-0507

Milpitas, CA 95035

Phone: (408)432-1900

1630 McCarthy Blvd.

LTC Confidential-For Customer Use Only

CUSTOMER NOTICE

LINEAR TECHNOLOGY HAS MADE A BEST EFFORT TO DESIGN A

CIRCUIT THAT MEETS CUSTOMER-SUPPLIED SPECIFICATIONS;

HOWEVER, IT REMAINS THE CUSTOMER'S RESPONSIBILITY TO

VERIFY PROPER AND RELIABLE OPERATION IN THE ACTUAL

APPLICATION. COMPONENT SUBSTITUTION AND PRINTED

CIRCUIT BOARD LAYOUT MAY SIGNIFICANTLY AFFECT CIRCUIT

PERFORMANCE OR RELIABILITY. CONTACT LINEAR

TECHNOLOGY APPLICATIONS ENGINEERING FOR ASSISTANCE.

THIS CIRCUIT IS PROPRIETARY TO LINEAR TECHNOLOGY AND

SCHEMATIC

SUPPLIED FOR USE WITH LINEAR TECHNOLOGY PARTS.

SCALE = NONE

www.linear.com

DEMO CIRCUIT 2510A

DC2510A: SHIELD BOARD

N/A

12 - 8 - 15

SIZE

DATE:

IC NO. REV.

SHEET OF

TITLE:

APPROVALS

PCB DES.

APP ENG.

TECHNOLOGY Fax: (408)434-0507

Milpitas, CA 95035

Phone: (408)432-1900

1630 McCarthy Blvd.

LTC Confidential-For Customer Use Only

CUSTOMER NOTICE

LINEAR TECHNOLOGY HAS MADE A BEST EFFORT TO DESIGN A

CIRCUIT THAT MEETS CUSTOMER-SUPPLIED SPECIFICATIONS;

HOWEVER, IT REMAINS THE CUSTOMER'S RESPONSIBILITY TO

VERIFY PROPER AND RELIABLE OPERATION IN THE ACTUAL

APPLICATION. COMPONENT SUBSTITUTION AND PRINTED

CIRCUIT BOARD LAYOUT MAY SIGNIFICANTLY AFFECT CIRCUIT

PERFORMANCE OR RELIABILITY. CONTACT LINEAR

TECHNOLOGY APPLICATIONS ENGINEERING FOR ASSISTANCE.

THIS CIRCUIT IS PROPRIETARY TO LINEAR TECHNOLOGY AND

SCHEMATIC

SUPPLIED FOR USE WITH LINEAR TECHNOLOGY PARTS.

SCALE = NONE

www.linear.com

DEMO CIRCUIT 2510A

DC2510A: SHIELD BOARD

N/A

12 - 8 - 15

REVISION HISTORY

DESCRIPTION DATEAPPROVEDECO REV

ZPPRODUCTION

-112 - 8 - 15

REVISION HISTORY

DESCRIPTION DATEAPPROVEDECO REV

ZPPRODUCTION

-112 - 8 - 15

REVISION HISTORY

DESCRIPTION DATEAPPROVEDECO REV

ZPPRODUCTION

-112 - 8 - 15

TP25

TP36

TP42

TP65TP2

TP14

TP18

TP62

TP10

TP29

2x16 2MM HEADER

TP22

TP43

TP52

TP5

TP63

TP26

TP40

TP53

TP60

TP30

TP41

J5 2-PIN 2MM HEADER

TP50

TP38

TP61

TP15

TP4

TP7

TP19

TP51

TP56

TP58

TP11

TP48

TP23

TP39

TP59

TP16

TP8

TP27

TP12

TP31

TP3

TP20

TP49

TP46

TP24

TP37

TP28

TP55

TP57

2x16 2MM HEADER

TP66

TP47

TP32

TP1

TP44

TP13

TP33 TP34

TP64

TP6

TP9

TP17

TP21

TP35

TP45

TP54

dc2510afa

DEMO MANUAL

DC2510A

Information furnished by Linear Technology Corporation is believed to be accurate and reliable.

However, no responsibility is assumed for its use. Linear Technology Corporation makes no representa-

tion that the interconnection of its circuits as described herein will not infringe on existing patent rights.

SCHEMATIC DIAGRAM

D D

C C

B B

A A

FRONT

BACK

TP75

TP73

TP68

TP70

TP126

TP128TP131

TP133

FRONT

BACK

FRONT

BACK

TP67

TP68

TP69

TP70

TP71 TP72

TP73

TP74

TP75

TP76

TP67

TP69

TP71TP72

TP74

TP76

TP77

TP78

TP79

TP80

TP84

TP81

TP83

TP82

TP84

TP81

TP83

TP82

TP77

TP78

TP79

TP80

TP85

TP86

TP87

TP88

TP89

TP90

TP91

TP92

TP93

TP94 TP95

TP96

TP97

TP98

TP99

TP100

TP101

TP102

TP103

TP104 TP105

TP106

TP107

TP108

TP109

TP110

TP111

TP112

TP113

TP114 TP115

TP116

TP117

TP118

TP119

TP120

TP121

TP122

TP123

TP124

TP85

TP86

TP87

TP88

TP89

TP90

TP91

TP92

TP93

TP94 TP95

TP96

TP97

TP98

TP99

TP100

TP101

TP102

TP103

TP104 TP105

TP106

TP107

TP108

TP109

TP110

TP111

TP112

TP113

TP114

TP121

TP122

TP123

TP124

TP115

TP116

TP117

TP118

TP119

TP120

TP121

TP122

TP123

TP124

TP115

TP116

TP117

TP118

TP119

TP120

TP105

TP106

TP107

TP108

TP109

TP110

TP111

TP112

TP113

TP114 TP95

TP96

TP97

TP98

TP99

TP100

TP101

TP102

TP103

TP104 TP85

TP86

TP87

TP88

TP89

TP90

TP91

TP92

TP93

TP94

TP125

TP126

TP127

TP128

TP129 TP130

TP131

TP132

TP133

TP134

TP135

TP136

TP137

TP138

TP142

TP139

TP141

TP140

TP125

TP127

TP129TP130

TP132

TP134

TP142

TP139

TP141

TP140

TP135

TP136

TP137

TP138

TP88

TP115

TP91

TP95

U2B

TSOT23-8L

455

TP102

TP68

TP108

TP126

TP142

TP120

TP74

TP78

TP92

TP98

TP139

U3C

SSOP-20

17 17

12 12

20 20

19 19

15 15

18 18

16 16

14 14

11 11

13 13

TP104

TP117

TP114

U3B

DFN-20

17 17

12 12

20 20

19 19

15 15

18 18

16 16

14 14

11 11

13 13

TP129

TP123

TP83

U1B

SOT-23

TP132

TP138

U3A

SOIC-20

17 17

12 12

20 20

19 19

15 15

18 18

16 16

14 14

11 11

13 13

TP76

U1A

MSOP-10L

566

10 10

TP105

TP86

TP110TP90

TP97

U6B

TSOT23-8L

455

TP137

TP77

TP67

TP107

U1C

SOT-23

U5A

MSOP-10L

566

10 10

TP125

TP119

TP72

TP122

TP113

TP94

TP99

U4C

SSOP-20

17 17

12 12

20 20

19 19

15 15

18 18

16 16

14 14

11 11

13 13

U2A

TS8

455

TP101

TP89

TP127

TP79

TP70

TP141

TP135

U6A

TS8

455

TP75

U5B

SOT-23

TP85

TP109

TP131

TP140

TP133

U5C

SOT-23

U4B

DFN-20

17 17

12 12

20 20

19 19

15 15

18 18

16 16

14 14

11 11

13 13

U4A

SOIC-20

17 17

12 12

20 20

19 19

15 15

18 18

16 16

14 14

11 11

13 13

TP112

TP87

TP121

TP116

TP93 TP96

TP100

TP69

TP128

TP73

TP80

TP136

TP103

TP118

TP71

TP134

TP82

TP124

TP130

TP81

TP84

TP111

TP106

dc2510afa

DEMO MANUAL

DC2510A

LT 0917 REV A • PRINTED IN USA

DEMONSTRATION BOARD IMPORTANT NOTICE

Linear Technology Corporation (LTC) provides the enclosed product(s) under the following AS IS conditions:

This demonstration board (DEMO BOARD) kit being sold or provided by Linear Technology is intended for use for ENGINEERING DEVELOPMENT

OR EVALUATION PURPOSES ONLY and is not provided by LTC for commercial use. As such, the DEMO BOARD herein may not be complete

in terms of required design-, marketing-, and/or manufacturing-related protective considerations, including but not limited to product safety

measures typically found in finished commercial goods. As a prototype, this product does not fall within the scope of the European Union

directive on electromagnetic compatibility and therefore may or may not meet the technical requirements of the directive, or other regulations.

If this evaluation kit does not meet the specifications recited in the DEMO BOARD manual the kit may be returned within 30 days from the date

of delivery for a full refund. THE FOREGOING WARRANTY IS THE EXCLUSIVE WARRANTY MADE BY THE SELLER TO BUYER AND IS IN LIEU

OF ALL OTHER WARRANTIES, EXPRESSED, IMPLIED, OR STATUTORY, INCLUDING ANY WARRANTY OF MERCHANTABILITY OR FITNESS

FOR ANY PARTICULAR PURPOSE. EXCEPT TO THE EXTENT OF THIS INDEMNITY, NEITHER PARTY SHALL BE LIABLE TO THE OTHER FOR

ANY INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES.

The user assumes all responsibility and liability for proper and safe handling of the goods. Further, the user releases LTC from all claims

arising from the handling or use of the goods. Due to the open construction of the product, it is the user’s responsibility to take any and all

appropriate precautions with regard to electrostatic discharge. Also be aware that the products herein may not be regulatory compliant or

agency certified (FCC, UL, CE, etc.).

No License is granted under any patent right or other intellectual property whatsoever. LTC assumes no liability for applications assistance,

customer product design, software performance, or infringement of patents or any other intellectual property rights of any kind.

LTC currently services a variety of customers for products around the world, and therefore this transaction is not exclusive.

Please read the DEMO BOARD manual prior to handling the product. Persons handling this product must have electronics training and

observe good laboratory practice standards. Common sense is encouraged.

This notice contains important safety information about temperatures and voltages. For further safety concerns, please contact a LTC application

engineer.

Mailing Address:

Linear Technology

1630 McCarthy Blvd.

Milpitas, CA 95035

Indice

Altri manuali Analog Devices Scheda madre

Analog Devices

Analog Devices Linear Technology DC2483A-B Guida rapida alla configurazione

Analog Devices

Analog Devices Linear ADI Power DC2686A Manuale utente

Analog Devices

Analog Devices EVAL AD5933-U1 Manuale di istruzioni

Analog Devices

Analog Devices EVAL-ADAU1401AEBZ Manuale utente

Analog Devices

Analog Devices DC2575A Guida rapida alla configurazione

Analog Devices

Analog Devices UG-173 Manuale utente

Analog Devices

Analog Devices EVAL-ADXL362Z Manuale utente

Analog Devices

Analog Devices EVAL-AD5676SDZ Manuale utente

Analog Devices

Analog Devices LINEAR DC2469A Guida rapida alla configurazione

Analog Devices

Analog Devices ADP5062 Manuale utente

Analog Devices

Analog Devices EVAL-ADPD2140Z Manuale utente

Analog Devices

Analog Devices ADSP-21161N Manuale utente

Analog Devices

Analog Devices EB-O16CP-3Z Manuale utente

Analog Devices

Analog Devices ADP5140-EVALZ Manuale utente

Analog Devices

Analog Devices LINEAR DC2702A-A Guida rapida alla configurazione

Analog Devices

Analog Devices EVAL-LTC3313EV-A-Z Manuale utente

Analog Devices

Analog Devices EV-ADF4159EB1Z Manuale utente

Analog Devices

Analog Devices iCoupler ADuM6010EBZ Manuale utente

Analog Devices

Analog Devices ADSP-BF535 EZ-KIT Lite Manuale utente

Analog Devices

Analog Devices EVAL-ADXRS450Z-V Manuale utente

Analog Devices

Analog Devices AD9858PCB Manuale utente

Analog Devices

Analog Devices AD9272 Manuale utente

Analog Devices

Analog Devices EVAL-SSM2301 Manuale utente

Analog Devices

Analog Devices AD7366 Manuale utente

Manuali Scheda madre popolari di altre marche

DFI

DFI SD170 Manuale utente

ASROCK

ASROCK ROMED8-2T Manuale utente

Asus

Asus P2L97A Manuale utente

Winmate

Winmate IC70 Manuale utente

Asus

Asus MES-B Manuale utente

Grantech

Grantech SYS8F377VGGA-3OMN Manuale utente

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Manuale utente

Gigabyte

Gigabyte GA-9IVDT Manuale utente

Texas Instruments

Texas Instruments ADS8372EVM Manuale utente

Commell

Commell MS-C73 Manuale utente

IBT Technologies

IBT Technologies MB860 Manuale utente

Nvidia

Nvidia TEGRA DG-04927-001_V01 Manuale utente

Biostar

Biostar M7VIT Bravo Istruzioni per l'uso e l'installazione

Intel

Intel D33217CK Manuale utente

Asus

Asus F1A55-M LX PLUS R2.0 Manuale utente

EPC

EPC EPC9147C Manuale utente

Asus

Asus EX-B760M-V5 D4 Manuale utente

EPOX

EPOX MU-8KHA0010 Manuale utente