Analog Devices Lite ADSP-21375 EZ-KIT Guida utente

ADSP-21375 EZ-KIT Lite®

Evaluation System Manual

Revision 1.2, August 2012

Part Number

82-000940-02

Analog Devices, Inc.

One Technology Way

Norwood, Mass. 02062-9106

Downloaded from Arrow.com.

ment may not be reproduced in any form without prior, express written

consent from Analog Devices, Inc.

Printed in the USA.

Disclaimer

Analog Devices, Inc. reserves the right to change this product without

prior notice. Information furnished by Analog Devices is believed to be

accurate and reliable. However, no responsibility is assumed by Analog

Devices for its use; nor for any infringement of patents or other rights of

third parties which may result from its use. No license is granted by impli-

cation or otherwise under the patent rights of Analog Devices, Inc.

Trademark and Service Mark Notice

The Analog Devices logo, CrossCore, EngineerZone, EZ-KIT Lite,

SHARC, and VisualDSP++ are registered trademarks of Analog Devices,

Inc.

All other brand and product names are trademarks or service marks of

their respective owners.

Downloaded from Arrow.com.Downloaded from Arrow.com.

Regulatory Compliance

The ADSP-21375 EZ-KIT Lite is designed to be used solely in a labora-

tory environment. The board is not intended for use as a consumer end

product or as a portion of a consumer end product. The board is an open

system design which does not include a shielded enclosure and therefore

may cause interference to other electrical devices in close proximity. This

board should not be used in or near any medical equipment or RF devices.

The ADSP-21375 EZ-KIT Lite has been certified to comply with the

essential requirements of the European EMC directive 89/336/EEC

amended by 93/68/EEC and therefore carries the “CE” mark.

The ADSP-21375 EZ-KIT Lite has been appended to Analog Devices,

Inc. EMC Technical File (EMC TF) referenced ‘DSPTOOLS1’ dated

December 21, 1997 and was declared CE compliant by an appointed

Notified Body (No.0673) as listed below.

Notified Body Statement of Compliance: Z600ANA1.027

Issued by: Technology International (Europe) Limited

60 Shrivenham Hundred Business Park

Shrivenham, Swindon, SN6 8TY, UK

The EZ-KIT Lite evaluation system contains ESD (electrostatic discharge)

sensitive devices. Electrostatic charges readily accumulate on the human

body and equipment and can discharge without detection. Permanent

damage may occur on devices subjected to high-energy discharges. Proper

ESD precautions are recommended to avoid performance degradation or

loss of functionality. Store unused EZ-KIT Lite boards in the protective

shipping package.

Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.

Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.

ADSP-21375 EZ-KIT Lite Evaluation System Manual v

CONTENTS

PREFACE

Product Overview .......................................................................... x

Purpose of This Manual .............................................................. xiii

Intended Audience ...................................................................... xiii

Manual Contents ......................................................................... xiv

What’s New in This Manual ......................................................... xiv

Technical Support ......................................................................... xv

Supported Processors .................................................................... xvi

Product Information .................................................................... xvi

Analog Devices Web Site ........................................................ xvi

EngineerZone ........................................................................ xvii

Related Documents .................................................................... xviii

Notation Conventions ................................................................ xviii

USING THE ADSP-21375 EZ-KIT LITE

Package Contents .......................................................................... 1-2

Default Configuration ................................................................... 1-3

CCES Install and Session Startup .................................................. 1-4

Session Startup ........................................................................ 1-6

Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.

Contents

vi ADSP-21375 EZ-KIT Lite Evaluation System Manual

VisualDSP++ Install and Session ................................................... 1-8

Session Startup ........................................................................ 1-9

CCES Evaluation License ........................................................... 1-10

VisualDSP++ Evaluation License ................................................. 1-11

External Memory ........................................................................ 1-12

ELVIS Interface .......................................................................... 1-13

Analog Audio ............................................................................. 1-14

LEDs and Push Buttons .............................................................. 1-15

Example Programs ...................................................................... 1-17

Board Design Database ............................................................... 1-17

ADSP-21375 EZ-KIT LITE HARDWARE REFERENCE

System Architecture ...................................................................... 2-2

External Port ........................................................................... 2-3

DAI Interface .......................................................................... 2-4

DPI Interface .......................................................................... 2-5

FLAG Pins .............................................................................. 2-6

External PLL ........................................................................... 2-7

Expansion Interface ................................................................. 2-7

JTAG Emulation Port ............................................................. 2-8

Switches ....................................................................................... 2-9

Boot Mode and Clock Ratio Select Switch (SW2) .................. 2-10

Codec Setup Switch (SW3) ................................................... 2-11

Electret Microphone Select Switch (SW4) .............................. 2-12

UART Enable Switch (SW5) ................................................. 2-12

Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.

ADSP-21375 EZ-KIT Lite Evaluation System Manual vii

Contents

Loopback Test Switches (SW6 and SW14) ............................. 2-12

Push Button Enable Switch (SW7) ......................................... 2-13

ELVIS Oscilloscope Configuration Switch (SW1) ................... 2-13

ELVIS Function Generator Configuration Switch (SW13) ...... 2-14

AD1835A and Flash Disconnect Switch (SW15) .................... 2-15

LEDs and Push Buttons .............................................................. 2-15

General Purpose LEDs (LED1–8) .......................................... 2-16

Power LED (LED9) ............................................................... 2-16

Reset LED (LED10) .............................................................. 2-16

USB Monitor LED (ZLED3) ................................................. 2-16

Push Buttons (SW8–11) ........................................................ 2-17

Board Reset Push Button (SW12) .......................................... 2-17

Jumpers ...................................................................................... 2-18

VCO Select Jumper (JP1) ...................................................... 2-19

ELVIS Select Jumper (JP2) .................................................... 2-19

ELVIS Voltage Selection Jumper (JP3) ................................... 2-20

ELVIS Programmable Flag Jumper (JP4) ................................ 2-20

Connectors ................................................................................. 2-21

Expansion Interface Connectors (J1–3) .................................. 2-22

Audio In RCA Connector (J10) ............................................. 2-22

Audio Out RCA Connector (J5) ............................................ 2-23

Headphone Out Jack (J9) ...................................................... 2-23

Power Jack (J4) ...................................................................... 2-23

S/PDIF Coax Connectors (J7 and J8) .................................... 2-24

Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.

Contents

viii ADSP-21375 EZ-KIT Lite Evaluation System Manual

DPI Header (P3) ................................................................... 2-24

DAI Header (P4) .................................................................. 2-25

JTAG Header (ZP4) .............................................................. 2-25

ADSP-21375 EZ-KIT LITE BILL OF MATERIALS

ADSP-21375 EZ-KIT LITE SCHEMATIC

INDEX

Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.

ADSP-21375 EZ-KIT Lite Evaluation System Manual ix

PREFACE

Thank you for purchasing the ADSP-21375 EZ-KIT Lite®, Analog

Devices, Inc. evaluation system for SHARC®processors.

SHARC processors are based on a 32-bit super Harvard architecture that

includes a unique memory architecture comprised of two large on-chip,

dual-ported SRAM blocks coupled with a sophisticated I/O processor,

which gives a SHARC processor the bandwidth for sustained high-speed

computations. SHARC processors represents today’s de facto standard for

floating-point processing, targeted toward premium audio applications.

The evaluation system is designed to be used in conjunction with the

CrossCore®Embedded Studio (CCES) and VisualDSP++®development

environments to test capabilities of the ADSP-21375 SHARC processors.

The development environment aids advanced application code develop-

ment and debug, such as:

• Create, compile, assemble, and link application programs written

in C++, C, and ADSP-21375 assembly

• Load, run, step, halt, and set breakpoints in application program

• Read and write data and program memory

• Read and write core and peripheral registers

• Plot memory

Access to the ADSP-21375 processor from a personal computer (PC) is

achieved through a USB port or an external JTAG emulator. The USB

interface provides unrestricted access to the ADSP-21375 processor and

Product Overview

x ADSP-21375 EZ-KIT Lite Evaluation System Manual

evaluation board peripherals. Analog Devices JTAG emulators offer faster

communication between the host PC and target hardware. Analog Devices

carries a wide range of in-circuit emulation products. To learn more about

Analog Devices emulators and processor development tools, go to

http://www.analog.com/dsp/tools.

The ADSP-21375 EZ-KIT Lite provides example programs to demon-

strate the capabilities of the evaluation board.

Product Overview

The board features:

• Analog Devices ADSP-21375 processor

• 208-pin MQFP package

• 266 MHz core clock speed

• Synchronous dynamic random access memory (SDRAM)

• 2M x 16-bit x 4 banks

• Flash memory

• 1M x 8-bit

• Serial peripheral interface (SPI) flash memory

•2Mbit

Indice

Altri manuali Analog Devices Scheda madre

Analog Devices

Analog Devices SSM2518 Manuale di istruzioni

Analog Devices

Analog Devices EV-ADF4360-8EB1Z Manuale utente

Analog Devices

Analog Devices AD9286-500EBZ Manuale utente

Analog Devices

Analog Devices ADSP-SC589 EZ-Board Manuale utente

Analog Devices

Analog Devices UG-185 Manuale utente

Analog Devices

Analog Devices EVAL-AD5934EB Manuale di istruzioni

Analog Devices

Analog Devices EVAL-ADuCM342EBZ Manuale utente

Analog Devices

Analog Devices AD9695 Manuale utente

Analog Devices

Analog Devices Linear DC2681A-A Guida rapida alla configurazione

Analog Devices

Analog Devices ADuC7024 Manuale utente

Analog Devices

Analog Devices EVAL-LTC7066-AZ Manuale utente

Analog Devices

Analog Devices EVAL-AD2428WD1BZ Manuale utente

Analog Devices

Analog Devices EV-ADF4356SD1Z Manuale utente

Analog Devices

Analog Devices Blackfin Audio EZ-Extender Manuale utente

Analog Devices

Analog Devices AD9268 Manuale utente

Analog Devices

Analog Devices UG-447 Manuale utente

Analog Devices

Analog Devices AD9858PCB Manuale utente

Analog Devices

Analog Devices ADMV8513-EVALZ Manuale utente

Analog Devices

Analog Devices AD9864 Manuale utente

Analog Devices

Analog Devices ADXRS450 Manuale utente

Analog Devices

Analog Devices UG-358 Manuale utente

Analog Devices

Analog Devices AD5258 Manuale utente

Analog Devices

Analog Devices DC2851A Manuale utente

Analog Devices

Analog Devices EVAL-ADF4156EBZ1 Manuale utente

Manuali Scheda madre popolari di altre marche

DFI

DFI SD170 Manuale utente

ASROCK

ASROCK ROMED8-2T Manuale utente

Asus

Asus P2L97A Manuale utente

Winmate

Winmate IC70 Manuale utente

Asus

Asus MES-B Manuale utente

Grantech

Grantech SYS8F377VGGA-3OMN Manuale utente

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Manuale utente

Gigabyte

Gigabyte GA-9IVDT Manuale utente

Texas Instruments

Texas Instruments ADS8372EVM Manuale utente

Commell

Commell MS-C73 Manuale utente

IBT Technologies

IBT Technologies MB860 Manuale utente

Nvidia

Nvidia TEGRA DG-04927-001_V01 Manuale utente

Biostar

Biostar M7VIT Bravo Istruzioni per l'uso e l'installazione

Intel

Intel D33217CK Manuale utente

Asus

Asus F1A55-M LX PLUS R2.0 Manuale utente

EPC

EPC EPC9147C Manuale utente

Asus

Asus EX-B760M-V5 D4 Manuale utente

EPOX

EPOX MU-8KHA0010 Manuale utente