AOpen AX6B Plus Manuale utente

AX6B PLUS

User's Guide

Printed in Taiwan

PART NO.: 49.87826.001

DOC. NO.: AX6BP-1-E98010C

AX6B Plus

Mainboard

User's Guide

Document Number : AX6BP-1-E98010C

Model and revision : For AX6B Plus rev 1.xx

Manual version : English, rev C

Release Date : Oct 29, 1998

More help for latest information:

Taiwan http://www.aopen.com.tw

USA http://www.aopen-usa.com

http://www.aopenusa.om

http://www.aopenamerica.com

Europe http://www.aopen.nl

publication may be reproduced, transmitted, transcribed, stored in a retrieval

system, or translated into any language or computer language, in any form or

by any means, electronic, mechanical, magnetic, optical, manual or otherwise,

without the prior written permission of this company.

iii

Disclaimer

This company makes no representations or warranties, either expressed or

implied, with respect to the contents hereof and specifically disclaims any

warranties, merchantability or fitness for any particular purpose. Any software

described in this manual is sold or licensed "as is". Should the programs prove

defective following their purchase, the buyer (and not this company, its

distributor, or its dealer) assumes the entire cost of all necessary servicing,

repair, and any incidental or consequential damages resulting from any defect

in the software. Further, this company reserves the right to revise this

publication and to make changes from time to time in the contents hereof

without obligation to notify any person of such revision or changes.

Intel and Pentium are registered trademarks of Intel Corporation.

XT/AT is a registered trademark of International Business Machines Corporation.

AMI is a registered trademark of American Megatrends Inc.

AWARD is a registered trademark of Award Software Inc.

Sound Blaster is a registered trademark of Creative Technology Ltd in the United States

and certain other countries.

Sound Blaster-LINK and SB-LINK are trademarks of Creative Technology Ltd.

Other brand and product names are trademarks and/or registered trademarks of their

respective holders.

FCC Class B Radio Frequency

Declaration of Conformity

This equipment has been tested and found to comply with the limits for a Class B

Subassembly -CPU Board device, pursuant to Part 15 of FCC Rules. Operation is

subject to the following two conditions: 1. This device may not cause harmful

interference, and 2. This device must accept any interference received, including

interference that may cause undesired operation.

Equipment Classification : FCC Class B Subassembly - CPU Board

Type of Product : Intel Pentium II Micro ATX Motherboard

Chipset(s) : Intel 82440BX

AX6B Plus

Test To Comply

With FCC Standards

FOR HOME OR OFFICE USE

The limits of FCC Part 15 Class B are designed to provide reasonable protection against

harmful interference in a residential installation. This equipment generates, uses, and

can radiate radio frequency energy and, if not installed and used in accordance with the

instructions, may cause harmful interference to radio communications. However, there is

no guarantee that interference will not occur in a particular installation. If this equipment

does cause harmful interference to radio or television reception, which can be determined

by turning the equipment off and on, the user is encouraged to try to correct the

interference by one or more of the following measures:

1. Reorient or relocate the receiving antenna.

2. Increase the separation between the equipment and receiver.

3. Connect the equipment into an outlet on a circuit different from that to which the

receiver is connected.

4. Consult the dealer or an experienced radio/television technician for help.

Notice 1:

The changes or modifications not expressly approved by the party responsible for

compliance could void the user's authority to operate the equipment.

Notice 2:

Shielded interface cables, if any, must be used in order to comply with emission limits.

Organization

Chapter 1, Overview, covers the introduction and specifications of the system

board and special features.

Chapter 2, Hardware Installation, describes hardware jumpers, connectors and

memory configuration. There are user friendly drawings to locate jumper and

connector.

Chapter 3, AWARD BIOS, explains the system BIOS and tells how to configure

the system by setting the BIOS parameters.

Appendix A, Frequently Asked Question, collects most frequently asked

question of this product.

Appendix B, Troubleshooting Guide, includes first aid information you need if

you meet trouble, the WWW address and worldwide service telephone/fax are

also included.

Appendix C, Jumper Table Summary, gives you a tabular summary of the

jumper settings discussed in Chapter 2.

Conventions

The following conventions are used in this manual:

Text entered by user,

default settings,

recommended selections

Represent text input by the user, default

settings and recommended selections

<Enter>, <Tab>,<Ctl>, <Alt>,

<Ins>, <Del>, etc Represent the actual keys that you

have to press on the keyboard.

Note:

Gives bits and pieces of additional

information related to the current topic.

Warning:

Alerts you to any damage that might

result from doing or not doing specific

actions.

Caution:

Suggests precautionary measures to

avoid potential hardware or software

problems.

Important:

Reminds you to take specific action

relevant to the accomplishment of the

procedure at hand.

Tip:

Tells how to accomplish a procedure

with minimum steps through little

shortcuts.

vii

Contents

Chapter 1 Overview

1.1 Specifications..................................................................4

1.2 Suspend to Hard Drive...................................................6

1.3 Zero Voltage Modem Wake Up ......................................9

1.4 System Voltage Monitoring..........................................11

1.5 Fan Monitoring..............................................................11

1.6 CPU Thermal Protection ..............................................12

1.7 Multi-language BIOS.....................................................12

1.8 Battery-less Design ......................................................13

1.9 Sound Blaster Link .......................................................13

chapter 2 Hardware Installation

2.1 Jumper and Connector Locations ................................2

2.2 Jumpers...........................................................................4

2.2.1 Selecting the CPU Frequency ..................................4

2.2.2 Setting the CPU Voltage...........................................5

2.2.3 Clearing the CMOS...................................................5

2.2.4 AGP Ratio.................................................................6

2.3 Connectors......................................................................7

2.3.1 Power Cable .............................................................7

2.3.2 ATX Soft-Power Switch Connector...........................7

2.3.3 Fan 8

2.3.4 PS/2 Mouse ..............................................................8

2.3.5 Keyboard...................................................................9

2.3.6 Serial Devices (COM1/COM2)..................................9

2.3.7 Printer .....................................................................10

2.3.8 USB Device.............................................................10

2.3.9 Floppy Drive............................................................11

2.3.10 IDE Hard Disk and CD ROM ................................11

viii

2.3.11 SCSI Devices........................................................12

2.3.12 Hard Disk LED......................................................13

2.3.13 SB-LINK................................................................13

2.3.14 Panel Connector...................................................14

2.3.15 IrDA Connector.....................................................15

2.3.16 Modem Wake-up Connector.................................16

2.3.17 LAN Wake-up Connector......................................16

2.4 Configuring the System Memory.................................17

chapter 3 Award BIOS

3.1 Entering the Award BIOS Setup Menu .........................2

3.2 Standard CMOS Setup....................................................3

3.3 BIOS Features Setup......................................................6

3.4 Chipset Features Setup................................................11

3.5 Power Management Setup...........................................16

3.6 PNP/PCI Configuration Setup......................................23

3.7 Load Setup Defaults.....................................................28

3.8 Load Turbo Defaults.....................................................28

3.9 Integrated Peripherals..................................................29

3.10 Password Setting........................................................34

3.11 IDE HDD Auto Detection ............................................34

3.12 Save & Exit Setup .......................................................34

3.13 Load EEPROM Default ...............................................35

3.14 Save EEPROM Default................................................35

3.15 Exit without Saving.....................................................35

3.16 BIOS Flash Utility........................................................36

Appendix A Frequently Asked Question

Appendix B Troubleshooting

Appendix C Jumper Table Summary

Indice

Altri manuali AOpen Scheda madre

AOpen

AOpen AX4GE Tube-G Scheda tecnica

AOpen

AOpen MX4LR-GN Guida all'installazione

AOpen

AOpen i945Ga-PLF Manuale utente

AOpen

AOpen MX4SGI-4DL Scheda tecnica

AOpen

AOpen AX4B-533 Tube Scheda tecnica

AOpen

AOpen MX4BS Scheda tecnica

AOpen

AOpen MK77M Guida all'installazione

AOpen

AOpen AX34II Manuale utente

AOpen

AOpen AK77-600GN Guida all'installazione

AOpen

AOpen AX37 PRO Guida all'installazione

AOpen

AOpen AX45-8X Max Guida all'installazione

AOpen

AOpen AK73 Series Guida all'installazione

AOpen

AOpen MX33 Manuale utente

AOpen

AOpen DXPS Manuale utente

AOpen

AOpen AX4SG Max II Manuale utente

AOpen

AOpen AX4B Max Scheda tecnica

AOpen

AOpen MK73LE Guida all'installazione

AOpen

AOpen AK33 M Scheda tecnica

AOpen

AOpen i945Ga-PLF Scheda tecnica

AOpen

AOpen AX4SG-U Guida all'installazione

AOpen

AOpen MX4SGI-4DN Guida all'installazione

AOpen

AOpen MK79 Guida all'installazione

AOpen

AOpen AK79G TUBE Guida all'installazione

AOpen

AOpen MX4GV Guida all'installazione

Manuali Scheda madre popolari di altre marche

DFI

DFI SD170 Manuale utente

ASROCK

ASROCK ROMED8-2T Manuale utente

Asus

Asus P2L97A Manuale utente

Winmate

Winmate IC70 Manuale utente

Asus

Asus MES-B Manuale utente

Grantech

Grantech SYS8F377VGGA-3OMN Manuale utente

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Manuale utente

Gigabyte

Gigabyte GA-9IVDT Manuale utente

Texas Instruments

Texas Instruments ADS8372EVM Manuale utente

Commell

Commell MS-C73 Manuale utente

IBT Technologies

IBT Technologies MB860 Manuale utente

Nvidia

Nvidia TEGRA DG-04927-001_V01 Manuale utente

Biostar

Biostar M7VIT Bravo Istruzioni per l'uso e l'installazione

Intel

Intel D33217CK Manuale utente

Asus

Asus F1A55-M LX PLUS R2.0 Manuale utente

EPC

EPC EPC9147C Manuale utente

Asus

Asus EX-B760M-V5 D4 Manuale utente

EPOX

EPOX MU-8KHA0010 Manuale utente