APART MASK2 Manuale utente

MASK2

Instruction manual

Instruction manualMASK2

1

MASK2 manual

2

Cabinet loudspeakers

Introduction

Please read this manual carefully before using the product. This

will give you the necessary product and installation instructions to

assure a seamless installation and non-compromised overall sound

quality.

Thank you for purchasing loudspeakers of the MASK series.

MASK2: Smaller, cuter, easier, ... but don’t be fooled by his tiny

appearance…

The Apart MASK2 speaker has successfully combined the typical

MASK look and the small size, but without losing the MASK sound

quality. MASK2 has been designed to ﬁt into any interior and suits

many different situations. Popular applications are multiroom audio

systems, meeting rooms, shops, you name it.

Like all the MASK series, it has been designed for the true music

lover, with the installer in mind.

Instruction manualMASK2

3

Safety instructions

• Keep this manual for future reference.

• Take care of your speaker wires, they should be free of damage.

Damaged speaker wires may result in poor sound quality and

can damage ampliﬁers.

• No mains power should be connected to the speakers, doing so

will damage the speaker.

• This speaker should only be serviced by qualiﬁed personnel. If

not, warranty might be void.

• Use cables of the right gauge, certainly for long runs.

• Use cables with clear color indication and maintain polarity

throughout the whole system.

• Avoid loud feedback for this is a main speaker killer.

• Clean only with dry cloth.

• Do not operate near heaters or place it on other apparatus

which produce a lot of heat.

• Only use accessories speciﬁed by the manufacturer.

• Make sure the mounting surface can easily support the

speaker’s weight.

• Use only industry-accepted rigging tools and methods.

• Use sufﬁcient loudspeakers and avoid death spots.

• Being exposed to loud levels over a long time can cause severe

hearing loss.

4

Cabinet loudspeakers

• Don’t forget to consult the local law directions regarding

producing sound in public places.

• Please check the unit’s condition after unpacking. If the outside

of the carton box has been damaged, inform your shipper

immediately.

Features and beneﬁts

• timeless design

• small, cute and easy to install

• 50 W RMS (using a 150 Hz / 12 dB / octave highpass ﬁlter)

• perfect match with Apart SUBLIME subwoofer

• 2.5” paper cone woofer

• inventive turn/tilt bracket

Instruction manualMASK2

5

Mounting the speaker

1. It is recommended to point the

center of the speaker to the center

of the dedicated listening area.

Before mounting the bracket on the

wall or ceiling, test-ﬁt the speaker-

bracket combination to see if you

can reach the desired mounting

angle. Determine the position of the

mounting holes using the bracket as

a template and drill the holes.

2. Mount the bracket to the surface.

The mounting materials for solid

brick walls are included. For other

materials you may need other

hardware.

3. Once all screws have been securely

tightened, place the included screw

covers in place.

6

Cabinet loudspeakers

4. The angle can be determined by

the position of the bracket base

and the position of the H-hook on

the half-sphere ball. The factory

default force setting of this central

screw is adjusted for moving the

H-hook over the semi-sphere with

or without the cabinet being over

the hook. You can fasten or loosen

the central screw to inﬂuence the

turning force of the H-hook.

5. Now slide out the rubber security

piece from the back of the speaker,

slide the speaker on the H-hook

of the mounting bracket. Slide

the rubber part back in place to

lock and secure the cabinet. Plug

the euroblock connector into the

speaker.

6. Consider to hide the speaker cable

by guiding it through one of the 4

pre-cut cable entries on the sides of

the bracket base.

Instruction manualMASK2

7

Note: With the MASK2CMT-W and the MASK2CMT-BL APART

provides an easy extension to the MASK2 bracket to ceiling mount

the MASK2 speakers.

8

Cabinet loudspeakers

Connecting the speaker

• Remove the euroblock connector from the speaker and connect

the speaker wire to the euroblock connector. Mind the polarity

marked on the back of the speaker: + is positive, - is negative.

Most speaker wires have a color code. Respect the color code

starting at your ampliﬁer up to your speakers.

• For distances up to 20 meters, you can use 0.75 mm² speaker

wire without any loss of performance. For longer distances, use

thicker wire.

Altri manuali per MASK2

2

Indice

Manuali Altoparlanti popolari di altre marche

argon audio

argon audio IE20 Manuale utente

Denon

Denon SC-N7 Manuale utente

Gemline

Gemline Ace 3952 Manuale utente

Focal

Focal ON WALL 300 Manuale di istruzioni

HEADRUSH

HEADRUSH Maximus HRSP 5024 Manuale utente

SoundLogic

SoundLogic BCCS-6/6395 Manuale utente

Peavey

Peavey DTH 218 Manuale utente

Avantree

Avantree Pluto Air Manuale utente

Morel

Morel Integra Series INTEGRA OVATION 4 Manuale utente

Oppo

Oppo SONICA Manuale utente

Bose

Bose SoundLink Wireless Music System Manuale utente

Rocksteady

Rocksteady Stadium Manuale utente

Bowers & Wilkins

Bowers & Wilkins 4 Manuale utente

Sonance

Sonance SONOS OUTDOOR Series Manuale utente

Electro-Voice

Electro-Voice EVID FM4.2 Manuale utente

Pioneer

Pioneer XW-HTD630 Manuale utente

Onn

Onn BWA16AA002 Manuale utente

HP

HP GL313AA - USB Speakers PC Multimedia Manuale utente