Aries 202020 Manuale utente

PAGE 1 • 202020-INS-RC• 877.287.8634 • NEED ASSISTANCE? • ARIESAUTOMOTIVE.COM

Product Image

Notes and Maintenance

Before you begin installation, read all instructions thoroughly.

Proper tools will improve the quality of installation and reduce the time required.

To protect the product, wax after installing. Regular waxing is recommended to

add a protective layer over the ﬁnish. Do not use any type of polish or wax that may

contain abrasives that could damage the ﬁnish.

For gloss black ﬁnishes, mild soap may be used to clean the product.

Refer to the table to the left when securing hardware during the

installation process to help prevent damage to the product or vehicle.

Level of Difﬁculty

Easy

Parts List

1Driver / left side bar

1Passenger / right side bar

2Mounting bracket, front

2Mounting bracket, rear

2Support bracket, front

8Hex bolt, M8 x 25mm

8Flat washer, M8 - 24mm x 2mm

8Lock washer, M8

4T-bolt, M10 x 50mm

2Hex bolt, M10 x 35mm

2Carriage bolt, M10 x 40mm

10 Flat washer, M10 - 27mm x 3mm

8Lock washer, M10

2Rectangular washer, M10

8Hex nut, M10 - 1.5

6Plastic bolt retainer, M10

Tools Required

Torque wrench Socket, 13mm

Extension Socket, 16mm

Wrench, 16mm Level

Scan

for helpful

install tips

Front

Rear

INSTALLATION MANUAL 202020

Torque Speciﬁcations

METRIC

M6 bolt 3 ft.-lbs.

M8 bolt 7 ft.-lbs.

M10 bolt 16 ft.-lbs.

M12 bolt 28 ft.-lbs.

SAE

1/4" bolt 3 ft.-lbs.

5/16" bolt 7 ft.-lbs.

3/8" bolt 16 ft.-lbs.

7/16" bolt 20 ft.-lbs.

1/2" bolt 28 ft.-lbs.

ARIESAUTOMOTIVE.COM • NEED ASSISTANCE? • 877.287.8634 • 202020-INS-RC• PAGE 2

Step 1

Starting on the driver-side, locate the two

mounting tabs underneath the vehicle.

Step 2

Locate the driver-side front mounting

point and remove the round and oval

rubber plugs.

Insert an M10 x 45mm carriage bolt

and an M10 rectangular washer into the

round hole. Slide a plastic bolt retainer

over the thread of the bolt to hold the

bolt in place.

Step 3

Insert an M10 T-bolt into the oval hole.

Slide a 9mm plastic bolt retainer over

the thread of the bolt to hold the T-bolt

in place.

Place the driver-side front mounting

bracket onto the vehicle and secure

the T-bolt with an M10 ﬂat washer,

M10 lock washers and M10 hex nut.

Snug the hardware,

but do not fully tighten.

Step 4

Place the support bracket onto the

vehicle and secure to the carriage bolt

using an M10 ﬂat washer, M10 lock

washer and M10 hex nut.

Align the slot on the support bracket

with the slot on the front mounting

bracket and secure using an M10 x 35mm

hex bolt and ﬂat washer on the side

facing the front of the vehicle and a

ﬂat washer, lock washer and hex nut

on the opposite side.

Snug the hardware,

but do not fully tighten

PAGE 3 • 202020-INS-RC• 877.287.8634 • NEED ASSISTANCE? • ARIESAUTOMOTIVE.COM

Step 5

Locate the rear mounting point

and remove the oval rubber plug.

Insert an M10 T-bolt into the oval hole

and slide a plastic bolt retainer over

the threads to hold the bolt in place.

Place the driver-side rear mounting

bracket up to the vehicle and secure

the bracket to the vehicle using an M10

ﬂat washer, lock washer and hex nut.

Snug the hardware,

but do not fully tighten.

Step 6

Place the side bar onto the mounting

brackets and align the mounting points.

Secure the side bar to the brackets using

four 10mm M8 x 25mm hex bolts, M8

lock washers and M8 lock washers.

Snug the hardware,

but do not fully tighten.

Adjust and level the side bar.

With the side bar in position, it is

recommended to tighten all brackets

to the vehicle ﬁrst, followed by the

side bar connections.

Step 7

Repeat steps 1 through 7 on the

passenger-side of the vehicle.

Congratulations on the installation of

your new ARIES 3" round side bars.

With the side bars installed, periodic

inspections should be performed to ensure

all mounting hardware remains tight.

To protect your investment, see the

'Notes and Maintenance' section on

the ﬁrst page of the instruction manual.

Indice

Manuali Accessori per automobili popolari di altre marche

James Baroud

James Baroud Odyssey Manuale utente

Motorola

Motorola i50sx Manuale utente

Yakima

Yakima 9MM STANDARD BIKE MOUNT Manuale utente

Feniex

Feniex T3 Manuale utente

Renault

Renault 77 11 423 180 Manuale utente

Kia

Kia E8300-4D000 Manuale utente

Brink

Brink 756843 Manuale utente

Whispbar

Whispbar K085W Manuale utente

v.link

v.link CI-VL2-PC-HSD Manuale utente

Viking

Viking Stack-Rack Guida rapida alla configurazione

Choetech

Choetech AT0005 Manuale utente

ZZ2

ZZ2 ZZAIR-PRO Manuale utente

Holman

Holman 4A80L Manuale utente

Thule

Thule 2075 Manuale utente

Motorola

Motorola T325 Manuale utente

TAUBENREUTHER

TAUBENREUTHER 16-3950 Guida all'installazione

DV8

DV8 FBJL-02 Manuale utente

Prorack

Prorack K1163 Manuale utente