Specification
BT version: 4.1
Talk time: 22h
Stand-by time: 900h
Music play time: 20h
Wireless range: 10m
Wireless profiles: A2DP/ AVRCP/ HSP /HFP
Impedance: 32Ω
Sound pressure level: 115 ±3dB
Frequency Response: 20Hz---20KHz
Weight: 270g
Dimension: 190 x 164 x 75mm
Warning
1. You must choose a qualified charger from a regular
manufacturer to charge the headphone.
2. You must charge the headphone if it has not been
used for more than 12 months.
5 6
8
Kit Contents
1. 1 X Stereo BT headphone F6PA
2. 1 X Charging micro USB cable
3. 1 X User manual
4. 1 X 3.5mm audio wire
4, Sound quality with Aptx code
Featuring the apt-X code, the headsets can connect
wirelessly to any apt-X enabled devices, vastly improving
the quality of BT streaming and delivering
CD-quality
Pairing with two phones or other devices at the
same time
This headphone can support multi-connection to 2
devices. It can pair with two mobile phones
simultaneously, taking the call from any of them.
After completing pairing with the first phone, turn
off the headphone, then re-do the paring procedure
with another phone. Once finished the pairing, restart
the headphone, it will automatically connect to the
phone or device of last connected. Short pressing the
two keys of volume “+” and volume “-” simultaneously
can enable the multipoint Connect function. From the
list of found devices on another mobile phone, select
the headphone “F6PA” to connect it.
7
sound.
3.5mm Audio Cable
Reset Mode: Connect the headphone to computer via
Micro USB cable. When red LED light flashes, eadphone
reset finished.
3.5mm music line-in function
Auto power off: Headphone will auto power off without
connecting in 30 minutes
：Connect audio line in
cable to 3.5 audio jack for wired music.
(Phone call function cannot be used in this mode.)
The headphone is off status.
A) Connect the 3.5 audio wire to the headphone and
audio player.
B) You can adjust volume bottom of the audio player
or music player to reach right volume to listen music.
Pairing (One headphone supports connecting 2
phone devices )
Pairing with one phone or other devices
Make sure the headphone is powered off.
Press and hold the multifunctional button for 5 seconds
to enter into the pairing mode.
After red LED & blue LED flash alternately, there will be
smart voice reminding entering intopairing mode.
Activate BT function on your phone or device
and search for headphone. From the list of found
devices on your mobile phone, select the headphone
“F6PA” to connect it. Follow the instruction to enter
“0000” as PIN if the mobile phone reminder appears.
Headphone or device can be used to play your phone
music or dial phone call etc.
NC
Active noise cancellation function(ANC)
When there is too much noise in surroundings,
Short press the ANC key, ANC function can
effectively remove 90% of low frequency noise
environment, provides excellent and beautiful high
quality sound.
Ensure that minimize the environment to the user.
