AsReader ASR-023B Manuale utente
Asterisk, Inc.
Dalian Mingrixing Technology Co., Ltd.
Scan Module Setup
Manual
ASR-023B
Scan Module Setup Manual
ASTERISK, INC.
1
Revision History
VERSION
DESCRIPTION
REVISED BY
DATE
V1.0
Initial version
Trinity Liu
2020/1/15
Scan Module Setup Manual
ASTERISK, INC.
2
Contents
1
!Basic information 7!
1.1.!Factory Default Configuration 7!
1.2.!Save current configuration as default 7!
1.3.!Default Configuration 8!
1.4.!Open/ Close The Parameter code 8!
1.5.!Product information 9!
2
!Communication Mode 10!
2.1.!Serial Port 10!
2.1.1.!Baud Rate 10!
2.1.2.!Parity 12!
2.1.3.!Stop bit 13!
2.2.!USB KBW 13!
2.3.!USB COM 13!
3
!Trigger Mode 14!
3.1.!Manual mode 14!
3.1.1.!Key Holding 14!
3.1.2.!Single Key Trigger 14!
3.2.!Continuous Mode 15!
3.2.1.!Interval Time 15!
3.3.!Automatic Induction Mode 16!
3.3.1.!Stability of Induction Time 16!
3.3.2.!Sensitivity Level 17!
Scan Module Setup Manual
ASTERISK, INC.
3
3.4.!Host mode 18!
3.5.!Duration in Scanning 18!
3.6.!Output Interval of The Same Code 19!
3.7.!Quick set for output Interval of The Same Code 19!
4
!Floodlight and Positioning lights 21!
4.1.!Floodlight 21!
4.2.!Positioning lights 22!
5
!Output and prompt 23!
5.1.!Keyboard 23!
5.1.1.!Country/Language Keyboard 23!
5.1.2.!Keyboard type 26!
5.1.3.!Time interval that keyboard outputs character 27!
5.1.4.!Output Ctrl Combination Key 27!
5.2.!Prompt sound 28!
5.2.1.!Mute 28!
5.2.2.!Beeper Volume 29!
5.2.3.!Beep After Good Decode 29!
5.2.4.!Boot prompt 30!
5.2.5.!Setup Code Prompt 30!
5.3.!Transmit “No Read” Message 31!
5.4.!Letter case conversion 31!
5.5.!Data encoding format 32!
5.6.!Invoice Function 33!
6
!Data editor 35!
6.1.!Code ID 35!
6.2.!Terminator 35!
6.3.!Add multiple Prefixes/suffixes 37!
6.4.!Hide data 39!
6.4.1.!Hide Head Data 39!
6.4.2.!Hide intermediate data 40!
6.4.3.!Hide tail data 41!
6.5.!STX&ETX 42!
Scan Module Setup Manual
ASTERISK, INC.
4
7
!Code Enable/Disable 44!
7.1.!1d code master switch 44!
7.2.!2d code master switch 44!
7.3.!1D Reverse code reading 45!
7.4.!UPC-A 45!
7.5.!UPC-A additional code 46!
7.5.1.!UPC-A 2 additional code 46!
7.5.2.!UPC-A 5 additional code 47!
7.5.3.!UPC-A Must read additional code 47!
7.6.!UPC-E 48!
7.7.!UPC-E additional code 49!
7.7.1.!UPC-E 2 additional code 49!
7.7.2.!UPC-E 5 additional code 49!
7.7.3.!UPC-E Must read additional code 50!
7.8.!UPC-E transfer UPC-A 50!
7.9.!UPC-A transfer EAN-13 51!
7.10.!EAN-8 51!
7.11.!EAN-8 additional code 52!
7.11.1.!EAN-8 2 additional code 52!
7.11.2.!EAN-8 5 additional code 53!
7.11.3.!EAN-8 Must read additional code 53!
7.12.!EAN-13 54!
7.13.!EAN-13 additional code 54!
7.13.1.!EAN-13 2 additional code 54!
7.13.2.!EAN-13 5 additional code 55!
7.13.3.!EAN-13 Must read additional code 55!
7.14.!CODE 128 56!
7.15.!GS1-128 56!
7.16.!ISBT-128 57!
7.17.!Interleaved 2 of 5 57!
7.17.1.!I 2 of 5 enable/disable 57!
7.17.2.!Set Lengths for Interleaved 2 of 5 58!
7.17.3.!transmit Interleaved 2 of 5 check bit 58!
7.18.!Matrix 2 of 5 59!
7.18.1.!Matrix 2 of 5 enable/disable 59!
7.18.2.!Set Lengths for Matrix 25 59!
Scan Module Setup Manual
ASTERISK, INC.
5
7.18.3.!transmit Matrix 2 of 5 check bit 60!
7.19.!Industrial 2 of 5 61!
7.19.1.!Industrial 2 of 5 enable/disable 61!
7.19.2.!Set Lengths for Industrial 2 of 5 61!
7.20.!Standard 2 of 5 62!
7.20.1.!Standard 2 of 5 enable/disable 62!
7.20.2.!Set Lengths for Standard 2 of 5 62!
7.20.3.!transmit Standard 2 of 5 check bit 63!
7.21.!Code 39 64!
7.21.1.!code39 enable/disable 64!
7.21.2.!Code39 Length 64!
7.21.3.!Code39 check bit 65!
7.21.4.!Transmit Code 39 start and ending symbol 65!
7.22.!Code 39 Full ASCII 66!
7.23.!Code 32 66!
7.23.1.!code32 enable/disable 66!
7.23.2.!code32 add prefix A 67!
7.24.!Code 93 67!
7.25.!Code 11 68!
7.25.1.!code11 enable/disable 68!
7.25.2.!transmit check bit 68!
7.26.!Codabar 69!
7.27.!PLESSEY 70!
7.28.!MSI 70!
7.28.1.!MSI enable/disable 70!
7.28.2.!Length 71!
7.29.!GS1-Databar 71!
7.30.!ITF14 71!
7.31.!GS1 composite code 72!
7.32.!QR Code 73!
7.32.1.!QR code enable/disable 73!
7.32.2.!read two QR codes at the same time 73!
7.32.3.!Read reverse QR code 74!
7.33.!Data Matrix 75!
7.33.1.!Data Matrix enable/disable 75!
7.33.2.!read two Data Matrix codes at the same time 75!
7.33.3.!Read reverse Data Matrix 76!
Scan Module Setup Manual
ASTERISK, INC.
6
7.34.!PDF 417 77!
7.34.1.!PDF417 enable/disable 77!
7.34.2.!read two PDF417 codes at the same time 77!
7.34.3.!Read reverse PDF417 78!
7.35.!Aztec code 79!
7.36.!Maxi code 79!
7.37.!Hanxin code 80!
7.37.1.!Appendix 1: numbered bar code 80!
7.37.2.!Appendix 2: CANCEL 82!
7.37.3.!Appendix 3: Code ID 83!
7.37.4.!Appendix 4: Character comparison table 83!
Scan Module Setup Manual
ASTERISK, INC.
7
1
BASIC INFORMATION
1.1. FACTORY DEFAULT CONFIGURATION
Communication Mode: USB
Trigger Mode: Manual mode
Termi nat o r: CR
Factory Default Configuration
1.2. SAVE CURRENT CONFIGURATION AS DEFAULT
The user can set the required configuration , and then scan the following barcode，
Save current configuration as default
Scan Module Setup Manual
ASTERISK, INC.
8
Save current configuration as default
1.3. DEFAULT CONFIGURATION
When the user has set the default settings, scan the following barcode to restore the
original set of customer configurations
Default Configuration
1.4. OPEN/ CLOSE THE PARAMETER CODE
Note: When you want to set parameters by scanning parameter codes, please scan
the following QR code first to enable this function.
*Open Parameter code
Scan Module Setup Manual
ASTERISK, INC.
9
Close Parameter code
1.5. PRODUCT INFORMATION
Altri manuali per ASR-023B
1
Indice
Manuali Unità di controllo popolari di altre marche
Festo
Festo Compact Performance CP-FB6-E Manuale elenco delle parti
Elo TouchSystems
Elo TouchSystems DMS-SA19P-EXTME Manuale utente
JS Automation
JS Automation MPC3034A Manuale utente
JAUDT
JAUDT SW GII 6406 Series Guida rapida
Spektrum
Spektrum Air Module System Manuale utente
BOC Edwards
BOC Edwards Q Series Manuale utente
