ASTUS QC25 Manuale di installazione
101, Boul. Roland-Therrien Bureau 500,
Longueuil, QC J4H 4B9, Canada
Tel.450-442-7887, Fax 450-442-0605
www.astus.com
Astus QC25 - Hardware user Guide 2 / 13
The information contained in this document is confidential
and proprietary to Astus Inc. Any distribution or
reproduction without prior authorization is prohibited.
DOCUMENT HISTORY
Rev. Date Author Description
0 2021-12-06 B. Béliveau First official release.
TABLE OF CONTENTS
1 Copyright Notice and Disclaimer ................................................................................................................. 3
2 Support ....................................................................................................................................................... 4
3 Product Description .................................................................................................................................... 4
4 Installation .................................................................................................................................................. 6
4.1 Safety and General Considerations .............................................................................................................. 6
4.2 Connecting directly to the vehicle’s OBD2 port ............................................................................................ 6
4.3 Use of a connection harness ......................................................................................................................... 8
4.4 Connecting the 2nd CAN .............................................................................................................................. 10
4.5 Connecting the I/O ..................................................................................................................................... 10
5 Testing the installation ............................................................................................................................. 10
6 Regulatory Information ............................................................................................................................. 11
6.1 FCC .............................................................................................................................................................. 11
6.1.1 Compliance Statement - Part 15.19 ................................................................................................ 11
6.2 IC ................................................................................................................................................................. 12
6.2.1 Compliance Statement .................................................................................................................... 12
6.2.2 Déclaration de conformité .............................................................................................................. 13
6.3 European ECE Approval .............................................................................................................................. 13
6.3.1 Compliance Statement .................................................................................................................... 13
6.3.2 Déclaration de conformité .............................................................................................................. 13
101, Boul. Roland-Therrien Bureau 500,
Longueuil, QC J4H 4B9, Canada
Tel.450-442-7887, Fax 450-442-0605
www.astus.com
Astus QC25 - Hardware user Guide 3 / 13
The information contained in this document is confidential
and proprietary to Astus Inc. Any distribution or
reproduction without prior authorization is prohibited.
1 Copyright Notice and Disclaimer
©2021 Astus Inc. All rights reserved.
Astus is registered trademark of Astus Inc. The names of other companies and products
mentioned in this document may be the trademarks of their respective owners.
The information contained in this document represents our current views on the subject matter
as at the date of publication. Given that we will respond to changing market conditions, this
document should not be interpreted to be any form of commitment on the part of either
company.
We do not guarantee the accuracy of the information in this document after the date of its
publication. This document is for information purposes only. We make no warranties, express
or implied, as to the information in this document. Complying with all applicable copyright laws
is the responsibility of the user.
Without limiting our rights under copyright, no part of this document may be reproduced,
stored in or introduced into a retrieval system, or transmitted in any form or by any means
(electronic, mechanical, photocopying, recording, or otherwise), for any purpose, without our
express written permission.
We may own patents, patent applications, trademarks, copyright, and other intellectual
property rights covering subject matter in this document. Except as expressly provided in any
written license agreement from us, the providing of this document does not give the user any
license under such patents, trademarks, copyright, or intellectual property rights.
101, Boul. Roland-Therrien Bureau 500,
Longueuil, QC J4H 4B9, Canada
Tel.450-442-7887, Fax 450-442-0605
www.astus.com
Astus QC25 - Hardware user Guide 4 / 13
The information contained in this document is confidential
and proprietary to Astus Inc. Any distribution or
reproduction without prior authorization is prohibited.
2 Support
If you have any questions, you may contact Astus Support:
Toll Free: 1-866-702-7887 ext. 243
+1-450-442-7887 ext. 243
Email: support@astus.com
Or visit our web site: www.astus.com
Astus Inc.
101, Boul. Roland-Therrien Bureau 500
Longueuil, QC J4H 4B9
Canada
3 Product Description
The Astus QC25 is an advanced telemetry tracking device with embedded GPS/GNSS and
mobile cellular communication capabilities. It possesses the following features:
Powered from 12V or 24V vehicle (8 to 33Vdc)
Delivered with one of the following cellular modem:
o QC25 WW BLE (worldwide): LTE 4G Cat-M1/NBIoT and 2G fallback
o QC25 NA1 BLE (North America): LTE 4G-Cat1 and 3G fallback
o QC25 EU1 BLE (Europe): LTE 4G-Cat1 and 2G fallback
GNSS module with simultaneous GPS and Glonass satellite tracking
One I/O that can be set as an input (0 – 32 Vdc) or output (set to GND when enabled)
1 x CAN interface for connection to the vehicle OBD2 or J1939 bus.
1 x CAN interface for connection to a second bus (vehicle or future Astus expansion
devices)
Internal 500 mA Li-ion battery (optional)
Works from -40 Celsius to +85 Celsius1
OBD2 main connector
Auxiliary connector (optional)
1 Within the enclosure.
101, Boul. Roland-Therrien Bureau 500,
Longueuil, QC J4H 4B9, Canada
Tel.450-442-7887, Fax 450-442-0605
www.astus.com
Astus QC25 - Hardware user Guide 5 / 13
The information contained in this document is confidential
and proprietary to Astus Inc. Any distribution or
reproduction without prior authorization is prohibited.
Auxiliary
connector
GPS
antenna
Cellular
antenna
BLE
antenna OBD2
connector
Product
label
Buzzer
LED
Figure 1 - Main Elements of the QC25
Figure 2 - Astus Telematic Architecture
1. The QC25 collects telemetry, diagnostic and localization data from vehicle.
2. The Data is communicated over a cellular network then the internet to Astus servers.
3. The Astus server analyses module data and presents real-time information, reports and
alerts.
4. The fleet owner/operator consults information from Astus application or Web portals.
Alternately, other computer systems may obtain data from Astus Web services.
101, Boul. Roland-Therrien Bureau 500,
Longueuil, QC J4H 4B9, Canada
Tel.450-442-7887, Fax 450-442-0605
www.astus.com
Astus QC25 - Hardware user Guide 6 / 13
The information contained in this document is confidential
and proprietary to Astus Inc. Any distribution or
reproduction without prior authorization is prohibited.
4 Installation
4.1 Safety and General Considerations
1. Do not connect the QC25 directly to the vehicle's OBD2 port or install the product in a
location if it interferes with the driving or safety of the driver and passengers.
2. The QC25 must be kept away from any source of heat, high humidity or possible liquid spills
(eg coffee). The ambient temperature should be in the range -20 Celsius to +60 Celsius
when the QC25 is equipped with a battery and -40 Celsius to +70 Celsius without the
battery.
3. Do not fix the QC25 on harnesses, hoses, pipes or heater ducts.
4. Do not fix the QC25 near radios or the vehicle’s audio system where it can create
interferences.
5. For optimal GPS reception, position the QC25 so that its GPS antenna (Figure 1) faces the
sky. Avoid metal surfaces above the antenna.
4.2 Connecting directly to the vehicle’s OBD2 port
1. Make sure the vehicle’s engine is turned OFF (vehicle’s key removed from the keyhole) for
at least 2 minutes.
2. Connect the QC25 to the vehicle’s OBD2 port.
Figure 3 - OBD2 from vehicle (example)
101, Boul. Roland-Therrien Bureau 500,
Longueuil, QC J4H 4B9, Canada
Tel.450-442-7887, Fax 450-442-0605
www.astus.com
Astus QC25 - Hardware user Guide 7 / 13
The information contained in this document is confidential
and proprietary to Astus Inc. Any distribution or
reproduction without prior authorization is prohibited.
Do not connect the QC25 directly to the vehicle's
OBD2 port if it interferes with the driving or the
safety of the driver and the passengers. See section
4.3 for other installation options.
3. Secure the QC25 to the OBD2 connector using a tie wrap.
Figure 4 - Suggested place (in green) to hold back with a tie wrap
101, Boul. Roland-Therrien Bureau 500,
Longueuil, QC J4H 4B9, Canada
Tel.450-442-7887, Fax 450-442-0605
www.astus.com
Astus QC25 - Hardware user Guide 8 / 13
The information contained in this document is confidential
and proprietary to Astus Inc. Any distribution or
reproduction without prior authorization is prohibited.
4.3 Use of a connection harness
An Astus harness can be used if:
- The vehicle does not have an OBD2 port.
- The direct connection to the OBD2 port is not secure.
- The QC25 must be hidden.
- The QC25 must be installed in a more optimal area.
- To connect a 2nd CAN to the QC25.
- To use the I/O of the QC25.
ETL-1700-0083 (Universal OBD2 Y harness)
101, Boul. Roland-Therrien Bureau 500,
Longueuil, QC J4H 4B9, Canada
Tel.450-442-7887, Fax 450-442-0605
www.astus.com
Astus QC25 - Hardware user Guide 9 / 13
The information contained in this document is confidential
and proprietary to Astus Inc. Any distribution or
reproduction without prior authorization is prohibited.
ETL-1700-0084 (Universal J1939 Y harness)
Harness ETL-1700-0090 (OBD2 to wires harness)
101, Boul. Roland-Therrien Bureau 500,
Longueuil, QC J4H 4B9, Canada
Tel.450-442-7887, Fax 450-442-0605
www.astus.com
Astus QC25 - Hardware user Guide 10 / 13
The information contained in this document is confidential
and proprietary to Astus Inc. Any distribution or
reproduction without prior authorization is prohibited.
4.4 Connecting the 2nd CAN
Connecting the 2nd CAN is only possible with harnesses described in Section 4.3.
The 2nd CAN must be enabled in the QC25 (usually shipped pre-configured).
1. Connect the yellow2 wire from the harness to the CAN High signal from the vehicle.
2. Connect the green3 wire from the harness to the CAN Low signal from the vehicle.
3. When connecting the wires, use a soldering iron and use heat shrink tubes or electrical
tape to protect the connections.
4.5 Connecting the I/O
Connecting the I/O is only possible with harnesses described in Section 4.3.
The I/O must be enabled in the QC25 (usually shipped pre-configured).
1. Connect the orange wire from the harness to the signal (if set as an input) or to the
accessory to control (if set as an output).
2. When connecting the wire, use a soldering iron and use a heat shrink tube or electrical
tape to protect the connection.
5 Testing the installation
If the malfunction indicator light (MIL) or the check engine light turns ON
while testing the installation, please stop the engine, remove the QC25 and
contact the Support for further information.
1. Connect the QC25 to the vehicle’s OBD2 port or to the Astus harness.
2. Start the engine.
3. On the QC25, locate the bi-color LED.
4. The QC25 should establish the CAN bus connection, connect to the remote Astus server
and obtain valid GPS positions in 5 minutes or less. The LED should then flash in green 4
times in 4 seconds. See the following table below for all possible LED patterns.
2 2nd CAN pair is yellow/green for harnesses ETL-1700-0083 and ETL-1700-0084.
3 1rst CAN pair is yellow/green and 2nd CAN pair is white/blue for ETL-1700-0090.
Indice
Manuali Unità di controllo popolari di altre marche
Festo
Festo Compact Performance CP-FB6-E Manuale elenco delle parti
Elo TouchSystems
Elo TouchSystems DMS-SA19P-EXTME Manuale utente
JS Automation
JS Automation MPC3034A Manuale utente
JAUDT
JAUDT SW GII 6406 Series Guida rapida
Spektrum
Spektrum Air Module System Manuale utente
BOC Edwards
BOC Edwards Q Series Manuale utente
