Asus GX1026 Manuale utente

English

Index

1. English................................................................................1

2. Nederlands .........................................................................9

3. Français............................................................................17

4. Deutsch ............................................................................25

5. Italiano ..............................................................................33

6. Português .........................................................................41

7. Русский .............................................................................49

8. Español.............................................................................57

9. Türkçe...............................................................................65

English

Quick Start Guide

GX1026

2 Quick Start Guide

English

Introduction

Thank you for purchasing the ASUS GX1026 rack mountable switch! The GX1026

provides non-blocking, wire-speed performance to meet your intensive network

needs. This switch comes with 24 Fast Ethernet ports and 2 Gigabit Ethernet ports

with auto-sensing and auto MDI/MDIX capabilities. With easy connectivity, ow

control, and QoS, the GX1026 is guaranteed to enhance your network performance

and productivity.

Features

• 24 x 10/100Mbps Fast Ethernet ports

• 2 x 10/100/1000Mbps Gigabit Ethernet ports

• Up to 200Mbps transmit speed for all ports in full-duplex mode

• Switch capacity: 8.8Gbps Forwarding rate: 3.6Mpps

• Plug and play–auto MDI/MDIX, and auto-sensing for speed and duplex mode

on all ports

• Flow control schemes (802.3x in full-duplex mode) to support zero loss under

temporary network congestion

• Head of Line (HOL) blocking preventions

• IEEE802.1p/TOS/DS supported to meet QoS requirements

• 4K MAC address learning and aging for concurrent connections to 4K nodes

• Easy-to-read LEDs provide quick indication of link status and speed

• Fanless design for quiet operation

• Desktop or rack mount placement options

Quick Start Guide 3

English

Package contents

Before installing the GX1026 switch, check your package for the following items.

• ASUS GX1026 switch x 1

• Power cable x 1

• User guide x 1

• Mounting kit x 1 (2 brackets and 6 screws)

Contact your retailer if any of the items is damaged or missing.

Technical specications

Physical dimensions 444mm (W) x 180mm (D) x 43.5mm (H)

Environmental

specications

Operating temperature: 0ºC ~ 50ºC (32ºF to 122ºF)

Storage temperature: -25ºC ~ 70ºC (-13ºF to 158ºF)

Operating humidity: 0 to 90%

Storage humidity: 0 to 90%

Operating altitude: up to 15,000 ft (4,500m)

Storage altitude: up to 40,000 ft (12,000m)

Power Input: 100V ~ 240V AC/50-60Hz

Power Consumption:12 Watts

Certication FCC Class A, CE

4 Quick Start Guide

English

Rear panel

The rear panel of GX1026 contains the power connector.

Hardware

Front panel

The front panel of GX1026 includes 24 10/100Mbps Fast Ethernet ports, 2

10/100/1000Mbps Gigabit Ethernet ports, and LED indicators that show the

working conditions of the switch.

Table 1. LED indicators

LED Color Status Description

SYSTEM Green ON The power is ON

STATUS Green

ON A device is connected to the port

Flashing Transmitting data

OFF No device connected

SPEED Green ON 100/1000Mbps

OFF 10Mbps

Power connector

Figure 1. GX1026 front panel

Figure2. GX1026 rear panel

Quick Start Guide 5

English

Placement options

Desktop placement

Place the GX1026 switch on a at and stable surface. Ensure that the location

meets the operating environmental specications. See page 3 for details.

Mounting the switch on a 19-inch rack

You can mount the GX1026 switch on a rack with the supplied mounting brackets

and screws.

To mount the switch on a rack:

1. Locate three screw holes on both sides of the switch.

2. Align the mounting brackets with the switch screw holes.

3. Secure the mounting brackets with three screws supplied in the mounting kit

on both sides of the switch.

4. Place the switch in a 19-inch rack, then secure both sides with four rack

mount screws.

The length of the UTP Category 5 cable length cannot exceed 100 meters (328

feet).

The rack mount screws are not supplied.

6 Quick Start Guide

English

Connecting network devices

To connect network devices to the GX1026 switch:

1. Connect one end of the Ethernet cable to an Ethernet port on the switch

front panel. Connect the other end to the Ethernet port of the network device.

Repeat this step to connect additional network devices.

2. Plug one end of the power cable to the power connector on the switch rear

panel, then plug the other end to a power outlet.

3. The Power LED and LAN LED indicators for active Ethernet ports light up

when the switch is powered on and active nodes are connected to the LAN

ports. Refer to the front panel illustration and LED table in page 4 for details.

• We recommend the use of Category 5 Ethernet straight-through cables to

ensure proper connections between the switch and other network devices.

• You can use either cross-over or straight-through cables to connect other

network devices such as bridges, switches, hubs, and repeaters.

1 2

Desktop Router

Printer

Server Wireless AP

Switch / Hub

NAS

Notebook

Server

Quick Start Guide 7

English

Troubleshooting

This section provides solutions to some common problems which you may

encounter when installing or using the ASUS GX1026 switch. Contact the

ASUS technical support if the problem still exists after you have performed the

troubleshooting solutions.

Problem Solution

The POWER LED does not light up. Check if the power cable is properly

connected to the switch and to a power

outlet with a correct voltage output.

The STATUS/SPEED LED

does not light up even after a network

device is connected to the port.

Check if the Ethernet cable is properly

connected to the switch and to the network

device.

Ensure that the switch and your network

device are powered on.

Check if the Ethernet cable meets your

network requirements. To connect a gigabit

switch port, you need a Category 5 cable to

get gigabit transfer speed.

8 Quick Start Guide

English

Glossary

10BASE-T 10 Mbps Ethernet over twisted pair cable (Category 3).

100BASE-T 100 Mbps Ethernet over twisted pair cable (Category 5)

1000BASE-T 1000 Mbps Ethernet over twisted pair cable (Category 5)

Auto MDI/MDIX Allows network connections using either straight or cross

cables.

Ethernet The most commonly installed computer network technology,

usually using twisted pair wiring. Ethernet data rates are

10Mbps, 100Mbps, and 1000Mbps.

Mbps Abbreviation for Megabits per second, or one million bits per

second. Network data rates are often expressed in Mbps.

network A group of computers that are connected together to

communicate with each other and share resources,

such as software, or les. A network can be small, such as a

LAN, or very large, such as the Internet.

Nederlands

Snelstartgids

GX1026

Indice

Lingue:

Manuali Interruttore popolari di altre marche

URC

URC Total Control MFS-8 Manuale utente

Azbil

Azbil HPQ-D11 Manuale utente

Sony

Sony DFS-900M Manuale utente

SICK

SICK i17S Manuale utente

F&F

F&F SZR-277 Manuale utente

Shure

Shure UAMS/BK Manuale utente

Dräger

Dräger X-zone Switch Off Manuale utente

Asco

Asco Joucomatic 349 Series Manuale utente

BT Mini Hub Manuale utente

D-Link

D-Link DES-1226G Manuale utente

Johnson Controls

Johnson Controls FS80-C Manuale utente

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Manuale utente

MicroNet

MicroNet SP1200A Manuale utente

Ruijie

Ruijie RG-PF2920 Series Manuale di installazione e funzionamento

Altinex

Altinex DA1914SX Manuale utente

MiLAN

MiLAN MIL-SM2401M Manuale utente

RJM

RJM MASTERMIND PBC/6X Manuale utente

Atlas

Atlas MMK-KVM8 Manuale utente