AT&T E2662B Manuale utente

User Manual (Part 2)

2.4 GHz Expansion

Handset E262

For use with AT&T

model E2562 / E2662B

91-5676-10-00_E262Manual_R0FEB2704.qxd 2/27/2004 12:41 PM Page 1

Table of contents

AT&T and the Globe Design are trademarks of AT&T Corp.,

licensed to Advanced American Telephones.

STOP! See pages 2-3

for easy instructions.

You must charge the

battery and register the

handset before use.

For customer service or product

information, visit our web site at

www.telephones.att.com

or call 1-800-222-3111.

Please also read

Important Product Information

Enclosed in product package.

Before you begin........................................1

Parts checklist.............................................1

Battery installation & charging................2

Registering the handset............................3

Belt clip & optional headset ....................4

Quick reference guide..............................5

91-5676-10-00_E262Manual_R0FEB2704.qxd 2/27/2004 12:41 PM Page 2

Before you begin

This cordless telephone operates with

the maximum power allowed by the

Federal Communications Commission

(FCC). Even so, this handset and

E2562 / E2662B base can communicate

over only a certain distance — which

can vary with the locations of the base

and handset, the weather, and the con-

struction of your home or office.

If you receive a call while you are

out of range, the handset might not

ring — or if it does ring, the call might

not connect when you press L1/L2.

Move closer to the base, then press

L1/L2 to answer the call.

If you move out of range during a

phone conversation, you might hear

noise or interference. To improve

reception, move closer to the base.

If you move out of range without

pressing OFF, your phone will be left

“off the hook.” To hang up properly,

walk back toward the telephone base,

periodically pressing OFF until the call

is disconnected.

Parts checklist

Remember to save your sales receipt and original packaging in case you ever need to

ship your telephone for warranty service. Check to make sure the telephone package

includes the following:

Handset charger

Telephone

handset

Power

adapter

Belt clip

Battery pack

91-5676-10-00_E262Manual_R0FEB2704.qxd 2/27/2004 12:41 PM Page 1

Light remains on while

battery is charging.

LOW BATTERY

RDL MEMMENU

Battery & charger installation

After installation, place the handset in the charger and allow the battery to charge for 12

hours before use. You can keep the battery charged by returning the handset to the charger

after each use. When battery power is fully depleted, a full recharge takes about 8 hours.

Press coin into slot on

base of handset to

release latch, then

remove cover.

Insert supplied

battery.

Place handset in charger for

12 hours before first use.

Low battery indicator

Return handset to charger when this

symbol flashes. (Handset will beep

when battery is low.)

Insert top

tab first.

Press down to

click in place.

Plug power cord into jack on under-

side of charger, then plug transformer

into electrical outlet.

Caution: Use only the supplied NiCd battery

(model 2403) or AT&T NiMH replacement battery

(model 2401).

91-5676-10-00_E262Manual_R0FEB2704.qxd 2/27/2004 12:41 PM Page 2

Registering the handset

Before using your new handset, you must register it with

the E2562 / E2662B base. During registration, you must

enter the 15-digit ID number of the telephone base. To

find this number, go to the base, press MENU, scroll

down to select DISPLAY BASE ID, then press OK.

The handset provided with your telephone is automatically

registered as Handset 1. Additional handsets will be

assigned numbers in the order they are registered (2, 3, 4,

etc.) up to a maximum of eight.

ENTER BASE ID

123456789012345

Enter base ID, then press OK.

HANDSET 2

Handset 1 Handset 2 Handset 3

REDIAL MEMMENU

91-5676-10-00_E262Manual_R0FEB2704.qxd 2/27/2004 12:41 PM Page 3

Belt clip & optional headset

Install belt clip as shown below if desired.

For hands-free telephone conversations, you can use any industry standard 2.5 mm

headset (purchased separately). For best results use an AT&T 2.5 mm headset.

Plug 2.5 mm headset

into jack on side of

handset (beneath

small rubber cap).

Snap belt clip into notches on

side of handset. Rotate and pull

to remove.

91-5676-10-00_E262Manual_R0FEB2704.qxd 2/27/2004 12:41 PM Page 4

Quick reference guide

For complete instructions, please refer to the manual provided with your

E2562 / E2662B telephone.

Off/Clear

During a call, press to hang up.

While using menus, press to cancel an

operation, back up to the previous

menu, or exit the menu display.

Speaker

Press to activate handset speaker-

phone. Press again to resume normal

handset use (earpiece).

Softkeys

Press a softkey to select a menu item

displayed just above the key.

L1/Flash, L2/Flash

Press L1 to make or answer a call on line 1.

Press L2 to make or answer a call on line 2.

During a call, press to receive an incoming

call, if Call Waiting is activated.

Volume

Press to adjust listening volume.

Xfer/Intercom

Press to transfer a call or initiate an

intercom conversation.

Redial Log Phonebook

Screen menus

Item 1 Item 2 Item 3

HANDSET 2

RDL MEM

Menus

Main Menu

Play New MSG

Call History

Mailboxes

Handset Settings

Ringers

Low Batt Tone

Range Tone

Keypad Tone

Contrast

Enhanced Mode

Rename

91-5676-10-00_E262Manual_R0FEB2704.qxd 2/27/2004 12:41 PM Page 5

AT&T and the Globe Design are trademarks of AT&T Corp.,

licensed to Advanced American Telephones. Printed in China. Issue 1 AT&T 02/04.

91-5676-10-00

www.telephones.att.com

91-5676-10-00_E262Manual_R0FEB2704.qxd 2/27/2004 12:41 PM Page 6

Questo manuale è adatto per i seguenti modelli

Indice

Manuali Cornetta popolari di altre marche

Swissvoice

Swissvoice ePure HD Manuale utente

Philips

Philips TD6736/BH051P Manuale utente

ASCOM

ASCOM I62 - Manuale utente

LG-Ericsson

LG-Ericsson LIP-9010 Manuale utente

GE 1583 Manuale utente

iiNet

iiNet Handset Manuale utente

ASCOM

ASCOM 9p23 Manuale utente

AirCell

AirCell ST 3100 Manuale utente

Eaton

Eaton HHIR-LCD-PROG Istruzioni per il montaggio

Mitel

Mitel 112 Manuale utente

SBC

SBC SBC-381H Manuale utente

Mitel

Mitel 5602 Manuale utente

ASCOM

ASCOM d81 Messenger Istruzioni per l'installazione

SpectraLink

SpectraLink 7522 Manuale utente

Avaya

Avaya L100 Series Come usare

ooma

ooma HD2 Handset Manuale utente

Yealink

Yealink IPW56 Manuale utente

Sony

Sony SBH52 Manuale utente