ATCOM AT-620 Manuale utente

AT-620 Quick Start Guide

ATCOM TECHNOLOGY CO., LIMITED

AT-620 Quick Start Guide

ISSUE 1.0

2009-7-6

AT-620 Quick Start Guide

ATCOM TECHNOLOGY CO., LIMITED

1、Installation and access.................................................................................................................3

2、Configure AT-620 to make VoIP calls.........................................................................................4

A、WAN Config ..............................................................................................................................4

B、SIP Config..................................................................................................................................5

C、IAX2 config................................................................................................................................5

AT-620 Quick Start Guide

ATCOM TECHNOLOGY CO., LIMITED

1、Installation and access

Installation:

Set up AT-620 as below:

If AT-620 is connect to your network. Press Navigation button up or down to get

the WAN IP address.

Modify your computer’s IP address to the same network as AT-620

Key in AT-620’s IP address in the web browser and press enter, then you can

access AT-620’s web manage interface. Remember the account is admin/admin

for administrator and guest/guest for user.

AT-620 Quick Start Guide

ATCOM TECHNOLOGY CO., LIMITED

2、Configure AT-620 to make VoIP calls

A、WAN Config

Enter Network

WAN Config to set the WAN setting:

AT-620 supports three different IP types: Static IP, Dynamic obtain IP (DHCP)

and PPPoE. You can use either of these IP types to connect the internet.

Use Static IP:

----Select “Static”;

----Enter the AT-620’s IP address in the “IP address” field.

----Set the “Net mask”, default 255.255.255.0

----Enter the AT-620’s upper gateway IP address (for example: Router) in the

“Gateway” field

----Key in the DNS information in the “Primary DNS” and “Alter DNS” fields.

Use DHCP:

----Select DHCP

If you have a DHCP server in your network, AT-620 will automatically obtain the

network information from your DHCP server.

Use PPPoE:

----Select PPPoE

----Type your PPPoE dialup information in the PPPoE setting fields: PPPoE server

(option), Username and password.

Then the AT-620 will connect to the internet through PPPoE, and automatically

obtain the IP address, Net mask, Gateway, Primary DNS and Alter DNS

information.

AT-620 Quick Start Guide

ATCOM TECHNOLOGY CO., LIMITED

B、SIP Config

Enter VoIP

SIP Config setting page and set the sip information

----Register ServerAddr: sip server address;

----Register Server Port : sip server register port;

----Register Username : username of your sip account;

----Register Password : password of your sip account;

----Register Number : Phone number of your sip account; the same as username

if none

----check Enable Register；

Then you can make VoIP calls if the WAN and SIP config is correct.

Notice: Please go to the “Config Manage” and save the config, otherwise you will lose the setting

after device reboot.

C、IAX2 config

AT-620 Quick Start Guide

ATCOM TECHNOLOGY CO., LIMITED

9Above is the IAX server configuration page

9IAX Server Addr: Register address of public IAX server

9IAX Server Port: Register port of public IAX server，default port is 4569

9Account Name: Username of your SIP account (Always the same as the

phone number)

9Account Password: Password of your IAX account.

9Local port: Signal port of local, default port is 4569

9Phone Number: Phone number of your IAX account.

9Voice mail number: If the IAX support voice mail, but your username of the

voice mail is letters which you cannot input with the ATA , then you use the

number to stand for your username.

9Voice mail text: if IAX support voice mail, config the domain name of your

mail box here.

9Echo test number: If the platform support echo test , and the number is test

form , the config the test number to replace the text format The echo test is

to test the error status of terminals and platform

9Echo test text: echo test number in text format

9Refresh time: IAX refresh time

9Enable Register: enable or disable register

9Enable G.729: Using G.729 speech coding mandatory consultations

Altri manuali per AT-620

Indice

Manuali Telefono IP popolari di altre marche

Alcatel

Alcatel 4028 Manuale utente

Polycom

Polycom Polycom VVX 600 Manuale utente

Polycom

Polycom SoundPoint IP 450 Manuale utente

Cisco

Cisco SPA-500 Series Manuale utente

Polycom

Polycom SoundPoint IP 650 Manuale utente

Proximus

Proximus Maestro 3016 IP Manuale utente

Fanvil

Fanvil X4 Manuale utente

Cisco

Cisco 7962 Manuale utente

Snom

Snom 320 Manuale utente

Yealink

Yealink Yealink SIP-T46G Manuale utente

Avaya

Avaya 4625SW Manuale utente

Yealink

Yealink SIP-T52S Manuale utente

Nortel

Nortel 1140E Manuale utente

Nexotek

Nexotek NT-P500 Manuale utente

Avaya

Avaya Integral 5 R3.0 Manuale utente

GE 28320EE2 - Dect 6.0 InfoLink 2 Manuale utente

Avaya

Avaya 4600 Series Manuale di servizio

Mitel

Mitel MIVOICE OFFICE 400 6940 SIP Manuale utente