ATEN CE-220L Manuale utente

CONSOLE

REMOTE I /O

AC 9V

CONSOLE

REMOTE I/O

AC 9V

User Manual

CE-220

Read this guide thoroughly and follow the installation and

operation procedures carefully in order to prevent any damage to

the units and/or any devices that connect to them.

This package contains:

1 CE-220L KVM Extender (Local Unit)

1 CE-220R KVM Extender (Remote Unit)

1 Custom KVM Cable

2 Power Adapters

1 User Manual

If anything is damaged or missing, contact your dealer.

Manual Part No. PAPE-1142-200

Printing Date: 11/2006

ATEN and the ATEN logo are trademarks of ATEN International Co., Ltd. All rights

reserved. All other trademarks are the property of their respective owners.

CE220.fm Page -1 Wednesday, November 22, 2006 10:55 AM

Note: This equipment has been tested and found to

complywiththelimitsforaClassBdigitaldevice,pursuant

to Part 15 of the FCC Rules. These limits are designed to

provide reasonable protection against harmful

interference in a residential installation. This equipment

generates, uses and can radiate radio frequency energy,

and if not installed and used in accordance with the

instruction manual, may cause interference to radio

communications. However, there is no guarantee that

interference will not occur in a particular installation. If this

equipment does cause harmful interference to radio or

television reception, which can be determined by turning

the equipment off and on, the user is encouraged to try to

correct the interference by one or more of the following

measures:

Reorient or relocate the receiving antenna;

Increase the separation between the equipment and

receiver;

Connect the equipment into an outlet on a circuit

different from that which the receiver is connected;

Consult the dealer or an experienced radio/television

technician for help.

CE220.fm Page 0 Wednesday, November 22, 2006 10:55 AM

- 1 -

Overview

Because the CE-220 KVM Extender System allows access to a

computer system from a remote console (keyboard, monitor, and

mouse), it is perfect for factory and construction sites, or any type

of installation where the console needs to be in a conveniently

accessible location, but you want thesystemequipment to reside

in a safe place - away from dust, dirt, and harsh environmental

influences.

The CE-220 System is also useful for control and security

purposes, where you can have the system unit in a secure area

at the same time that you put the console in a location that offers

convenient access.

The CE-220 KVM Extender provides the ideal means to access

the remote system box, since it improves on previous designs by

using inexpensive Category 5 cable—the kind commonly used in

Ethernetnetworks—instead ofbulkier,more expensive,standard

cables. Category 5 cabling makes for a much neater, more

convenient, more reliable data transfer connection.

Setup is as easy as can be—simply connect the computer

system box and local console to the Local CE-220 Module; run

the Cat. 5 cable to the Remote CE-220 Module (up to 150 m

away); and plug the remote console into the Remote Module.

Note: You can control numerous remote systems from a single

console by combining the CE-220 with a KVM switch.

CE220.fm Page 1 Wednesday, November 22, 2006 10:55 AM

- 2 -

Features

Inexpensive, reliable, Cat 5 cable to connect the local and

remote units—up to 150 meters apart

Dual console operation—control your system from both the

local and remote PS/2 keyboard, monitor, and mouse

consoles

Push button selection – of the active console

High resolution video – up to 1024 x 768 @ 150 m (max.)

Supports VGA, SVGA, and multisync monitors

Local monitor supports DDC; DDC2

System Requirements

Consoles

A VGA, SVGA, or Multisync monitor capable of the highest

resolution that you will be using on any computer in the

installation

A PS/2 style keyboard

A PS/2 style mouse

Note: 1. If you connect a DDC type monitor to the Local Unit, the

monitor that connects to the Remote Unit must be able

to support the highest video resolution that the DDC

monitor can provide.

2. You must use the same brand and model of mouse on

both the local and remote units.

CE220.fm Page 2 Wednesday, November 22, 2006 10:55 AM

- 3 -

Computers

Thefollowing equipmentmustbe installedon each computerthat

is to be connected to the system:

With PS/2 Type Connectors:

A VGA, SVGA, or Multisync card

A 6-pin mini-DIN mouse port

A 6-pin mini-DIN Keyboard port

With AT Type Connectors:

A VGA, SVGA or Multisync card

A DB-9 (standard serial), mouse port plus mouse adapter

(part # 2A-105)*

A 5-pin DIN (standard AT), keyboard port plus keyboard

adapter (part # 2A-106)*

*Not included - requires separate purchase.

Cables

Although it is possible to use standard KVM cables to link

computers with PS/2 type keyboard and mouse ports to the

CE-220L, for optimal signal integrity, and to simplify the

layout, we strongly recommend that you use the high quality

CS Custom KVM Cable that is provided with this package.

It is not possible to use standard KVM cables to link

computers with AT type keyboard and mouse ports to the CE-

220L. For those computers, CS Custom KVM Cables must be

used.

Category 5 cable is the minimum required to connect the local

and remote CE-220 units. Cable of a lesser standard will

result in degrading the video signal. For best performance, we

strongly recommend Category 5 cable.

CE220.fm Page 3 Wednesday, November 22, 2006 10:55 AM

- 4 -

Components

The Local Unit (CE-220L)

Front View:

#Description Function

1 Operating

ModeSelection

Switch

Pressing this button toggles between the operating

mode choices:

Local: only the local console can control the system(s)

Auto: both consoles can control the system(s).

2 LEDs The Local Unit has two LEDs to indicate the operating

status of the Local and Remote units (see CE-220L

(Local Unit), p. 9).

3 Mouse Port The local PS/2 mouse plugs into this connector.

4 Keyboard Port The local PS/2 keyboard plugs into this connector.

5 Monitor Port The local monitor plugs into this connector.

6 Remote I/O The Cat 5 twisted pair cable that connects to the Remote

Unit plugs into this connector.

7 Range Switch Slide the switch to the Long position if the Remote Unit

is located a long distance away (greater than 30m); slide

the switch to the short position if the Remote Unit is a

short distance away.

8 Power Jack The cable from the AC Power Adapter plugs into this

jack.

CONSOLE

REMOTE I /O

LONG SHORT

RANGE

AC 9V

CE220.fm Page 4 Wednesday, November 22, 2006 10:55 AM

- 5 -

The Local Unit (CE-220L)

Rear View:

Note: If you are combining the CE-220 with a KVM switch, the

KVM cable connects back to the respective ports on the

Console section of the switch.

#Description Function

1 Monitor Port The HDB-15 Video connector of the KVM cable that

connects to the computer's Video port plugs into this

connector.

2 Keyboard Port The Keyboard connector of the KVM cable that

connects to the computer's Keyboard port plugs into this

connector.

3 Mouse Port The Mouse connector of the KVM cable that connects to

the computer's Mouse port plugs into this connector.

CPU

CE220.fm Page 5 Wednesday, November 22, 2006 10:55 AM

- 6 -

The Remote Unit (CE-220R)

Front View:

#Description Function

1 LEDs The Remote Unit has two LEDs (Power and On Line) to

indicate the operating status of the Local and Remote

units (see CE-220R (Remote Unit), p. 9).

2 Mouse Port The remote PS/2 mouse plugs into this connector.

3 Keyboard Port The remote PS/2 keyboard plugs into this connector.

4 Monitor Port The remote monitor plugs into this connector.

5 Remote I/O The Cat 5 twisted pair cable that connects back to the

Local Unit plugs into this connector.

6 Power Jack The cable from the AC Power Adapter plugs into this

jack.

CONSOLE

REMOTE I /O

AC 9V

CE220.fm Page 6 Wednesday, November 22, 2006 10:55 AM

- 7 -

Installation

Setting up the CE-220 KVM Extender system is simply a matter

of plugging in the cables. Refer to the installation diagram on the

following page and do the following:

1. Make sure that all the equipment to be connected up is

powered Off.

2. Plug the cables from the local console devices (mouse,

keyboard, monitor), into their ports on the Console side of the

Local Unit (CE-220L).

3. Plug the appropriate connectors on the KVM cable supplied

with this unit into the CPU side of the CE-220L. Each

connector is marked with an appropriate icon to indicate

which it is.

Note: The female monitor connector is the one that plugs into

the CE-220L.

4. Plug the connectors on the other end of the cable into the

appropriate ports on the computer (or Console section of the

KVM switch if you are using one). Each connector is marked

with an appropriate icon to indicate which it is.

5. Plug either end of the Category 5 twisted pair cable into the

CE-220L's Remote I/O port.

6. Slide the Range Switch to the Long position if the Remote

Unit’s location is more than 30m away; slide it to the Short

position if the Remote Unit’s location is less than 30m away.

7. Plug one of the power adapters (supplied with this package)

into an AC source; plug the adapter's power cable into the

CE-220L's Power Jack

8. Plug the other end of the Category 5 twisted pair cable into

the I/O port of the Remote Unit (CE-220R).

9. Plug the cables from the remote console devices (mouse,

keyboard, monitor), into their ports on the Console side of the

CE-220R.

CE220.fm Page 7 Wednesday, November 22, 2006 10:55 AM

- 8 -

10.Plug the second power adapter (supplied with this package)

into an AC source; plug the adapter's power cable into the

CE-220R's Power Jack.

CE-220L

Rear View

CE-220L

FrontView

CE-220R

CPU

CONSOLE

REMOTE I /O

AC 9V

CONSOLE

REMOTE I /O

LONG SHORT

RANGE

AC 9V

CE220.fm Page 8 Wednesday, November 22, 2006 10:55 AM

Altri manuali per CE-220L

Questo manuale è adatto per i seguenti modelli

Indice

Manuali Estensione popolari di altre marche

SY HDBT-60T Manuale utente

Appsys ProAudio

Appsys ProAudio ADX-16 Manuale utente

Atlona

Atlona RS232 Manuale utente

IDK

IDK OPF-TH1000-A Manuale utente

Enable-IT

Enable-IT 824WP Manuale utente

Worx

Worx Landroid RadioLink WA0864 Scheda tecnica

TP-Link

TP-Link TL-WA730RE Manuale utente

Camplex

Camplex CMX-HDMI-SFPL Manuale utente

SC&T

SC&T HE03-4K Manuale utente

Marmitek

Marmitek MegaView70 Manuale utente

Samsung

Samsung SCS-26UC4 Manuale utente

Foxun

Foxun SX-GES24 Manuale utente

MuxLab

MuxLab 500771 Manuale utente

foxunhd

foxunhd SX-AEX01 Manuale utente

TERK Technologies

TERK Technologies LFIRX2 Manuale utente

Devolo

Devolo Audio Extender Manuale

Edimax

Edimax EW-7438RPn V2 Manuale utente

Shinybow USA

Shinybow USA SB-6335T5 Manuale utente