Atlas Copco Power Focus 600 Manuale utente

Power Focus 600

Printed Matter No. 9836 4954 01

Valid for Version No. 1.6

Issue No. 2014-03

2017-10-02

User Guide

WARNING

Read all safety warnings and instructions

Failure to follow the safety warnings and instructions may result in

electric shock, fire and/or serious injury.

Save all warnings and instructions for future reference

EN Power Focus 600

2© Atlas Copco Industrial Technique AB - 9836 4954 01

Overview

Safety and operating instructions

WARNING Read all warnings and all instructions. Failure to follow all

the instructions may result in electric shock, fire and/or serious personal

injury.

Ensure that you read and understand all instructions:

• Safety Information delivered together with the different parts of the sys-

tem.

• Product Instructions for installation, operation and maintenance of the

different parts of the system.

• All locally legislated safety regulations with regard to the system and

parts thereof.

Save all safety information and instructions for future reference.

WARNING Do not change system parameters at random.

• Changed parameters may result in risks of personal injury when handling

the tool.

• Included screenshots of the product interface only show examples of pa-

rameter settings or other configurations and are NOT intended to be gen-

erally applicable, unless otherwise stated.

NOTICE Changing parameters may lead to a decrease in tool performance and

may also slow down the production.

Contact your Atlas Copco representative if questions regarding the safety

and operating instructions arise.

Included images and screenshots

This manual includes screenshots from the product interface. The screenshots

can show examples of parameter settings or other configurations and are NOT

intended to be generally applicable, unless stated otherwise. Check with your

local Atlas Copco representative how to set up your specific system environ-

ment.

System architecture

IAM (Intelligent Application Module)

The Intelligent Application Module (IAM) contains the controller software,

configurations, results, and events. It is located on the backside of the front ac-

cess door and available in two different versions.

Power Focus 600 EN

Functionality Joint control Station control

Pset 1 16

Results 30 1000

Events 1000 1000

Batch — Batch sequence – Configure up to

four batch sequences. (1 batch se-

quence = 8 batches x 99 tighten-

ings)

Accessories No external hardware accessories

can be connected or configured.

The following external hardware

accesories can be connected and

configured:

• I/O Expander

• Stacklight

• Operator panel

• Socket selector

• Scanner

QIF accessories

The Power Focus concept features a number of accessories that simplify the

guidance and follow-up of performed tightenings. To use accessories with the

Power Focus a Station control IAM is required. The accessory functions can

be set up from the Accessories menu on the Power Focus unit.

The benefit of using serial bus-based accessories (I/O bus) is that they can be

connected in series, from accessory to accessory rather than hard wiring each

accessory to the Power Focus. This arrangement increases flexibility and quick

installation.

Power Focus uses 24 V DC, 1.5 A to power the bus, which is also used to

power external I/Os. If more current is needed, the bus must be powered exter-

nally. Every device has a 24 V DC input for this purpose.

Note! For further information about the accessories, refer to each accessory’s

user guide.

I/O Expander, sealed

I/O Expander enables the connection of several in-

puts and relays when more than those built-in are re-

quired. There are eight digital inputs, and four digital

and four relay outputs with the same functionality as

the four built-in I/Os. Each input and relay can be

configured individually.

The sealed I/O Expander is designed for more de-

manding environments than I/O Expander.

EN Power Focus 600

4© Atlas Copco Industrial Technique AB - 9836 4954 01

Socket selector

Socket selector is a socket tray with LED’s that can

be used to guide the user through, for example, a

Batch sequence. When using more than one Pset it is

very convenient to use a selector. When a socket is

lifted, the corresponding Pset will be selected.

The Socket Selector is available with four or eight

sockets, and communicates on the I/O bus.

Operator panel

Operator panel is an external device for the Power

Focus. It is a general purpose lamp- and switchbox,

replacing the customer specials that are made today.

The Operator panel communicates directly with the

Power Focus and the device configuration is made

through the controller HMI.

Stacklight

Stacklight ESL-04 is a flexible light and switch de-

vice designed to interface with controllers equipped

with an I/O Bus.

Stacklight DSL-03 is a simple and customizable light

and switch device, designed to interface with con-

trollers equipped with Internal I/O connectors instead

of I/O-bus.

The stacklight comes with features such as buzzer, ro-

tating light etc.

Scanner

Scanners are used to facilitate and automate the

process of assembly and selection of tightening pro-

grams.

Scanners can read a barcode or QR code and, based

on that information, select the appropriate batch se-

quence to use for that operation.

Power Focus 600 EN

Tool information

The Tool information view contains information used for giving service person-

nel accurate information about the tool connected to the controller so that they

give adequate help and support or for operators to see what tool is connected to

the controller.

Note! A tool must be connected to the controller for the

Tool menu to show information.

On the Tool menu, go to Tool information.

Information Description

Model Tool model denomination.

Max torque The maximum torque the tool is able to produce. This

value is used to calculate the tightening parameter

values depending on Tool max torque.

Max speed The maximum speed the tool is able to produce. This

value is used to calculate the tightening parameter

values depending on Tool max speed.

Gear ratio The ratio of the angular velocity of the input gear to

the angular velocity of the output gear.

Serial number The tool’s serial number can be needed when the cor-

rect version of the Product instruction is required, in

order to get the correct spare parts or service instruc-

tions.

Software version Tool software version.

Product number The tool’s Product or Ordering number.

Software information

The Software view contains information used for giving service personnel accu-

rate information about the software installed on the controller so that they give

adequate help and support, and an option to update and activate the controller

software.

EN Power Focus 600

6© Atlas Copco Industrial Technique AB - 9836 4954 01

On the Controller menu, go to Software.

Information Description

Version This is a unique version number of the software cur-

rently activated on the controller.

Hardware information

The hardware information window gives details about controller type and serial

number as well as the controller’s internal boards.

On the Controller menu, go to Hardware.

Auxiliary board

{ , : profile5 in element [subsection]}