Atomic ACLR-AC Manuale utente

CLR SERIES
OWNERS MANUAL
THE WORLD’S FIRST AND LEADING COMPANY
DESIGNING AMPLIFICATION AND MONITORING SOLUTIONS
FOR AMP MODELERS / PROFILERS
www.atomicamps.com
ACLR-AC
ACLR-AW
ACLR-PC
ACLR-PW
ACTIVE CAB
ACTIVE WEDGE
PASSIVE CAB
PASSIVE WEDGE

Atomic Ampliers and Atomic CLR Series are trademarks of Atomic Ampliers LLC. Any
other product names, trademarks or names are the property of their respective owners
which are in no way associated with or afliated with Atomic Ampliers LLC
© 2013 Atomic Ampliers LLC. All rights reserved.
Atomic Ampliers LLC • [email protected] • www.atomicamps.com
WARNING!
TO PREVENT FIRE OR SHOCK HAZARD,
DO NOT EXPOSE THIS UNIT TO RAIN
OR MOISTURE.
THE ATOMIC CLR IS DESIgNED FOR USE
AS A FLOOR wEDgE OR POLE-MOUNTED
PA SPEAKER IN PORTAbLE SOUND
REINFORCEMENT APPLICATIONS.
It is not intended for overhead suspension.
Use in that manner is unauthorized and may
cause injury or death.
NO USER SERVICAbLE PARTS INSIDE,
REFER SERVICINg TO QUALIFIED
PERSONNEL ONLY.
SERVICE bY PERSONS OTHER THAN
ATOMIC AUTHORIZED SERVICE
TECHNICIANS MAY VOID wARRANTY.
THIS UNIT MUST BE
EARTH GROUNDED.

1
REACTOR SERIES
USER MANUAL
TABLE OF CONTENTS
2 The CLR Series
3 Summary of Components
4 Panel Diagrams
5 - 6 Features & Instructions
8 Warranty

2
THE ATOMIC CLR SERIES
THE CLR SERIES is a range of professional, reference quality
CAB and
WEDGE
The CLR Series represents a highly accurate and superior-sounding
conditions of life on the road or in other professional environments,
2

3
SYSTEM DESCRIPTION
crossover designed to optimize amplitude response and preserve
and high frequencies - and a line-level active crossover that
a patented, high-performance variation on Class D that has found
to minimize the chances of driver damage due to operation at

4
ACTIVE CAB AND WEDGE CONTROL PANEL
PASSIVE CAB AND WEDGE CONTROL PANEL
1
1 2
9
11 13 14 15
10 12
2 4 6
3 5 7
8
Heat Sink
Input Thru
Input 1
Input 2 Link Select Link
Input 1
Clip LED
Input 2
Clip LED
Input 1 Level Master Level
Input 2 Level Speaker Limit
Indicator

5
ACTIVE CAB AND WEDGE PANEL EXPLANATIONS
Heat Sink –
Please note: The heat sink will
get warm to the touch while the amp is powered “on” even when
the amp is at idle. This is normal and is well within regulated
operating guidelines.
Input 1 Level –
Input 2 Level -
Preset Switch –
Speaker Limit Indicator –
Master Level – Controls the over volume of the CLR
Sub –
Power Switch –
Input 1 –
1 Input 1 Clip LED -
1 Input 2 -
1 Input 2 Clip LED -
1 Link Select –
1 Link Output -
1 IEC Power Inlet -
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15

6
PASSIVE CAB AND WEDGE PANEL EXPLANATIONS
Input –
Thru –
GAIN STRUCTURE SETUP FOR ACTIVE SPEAKERS
Optimizing gain structure is an important step in minimizing noise and
Increase the Input level control for that channel until you see the LED
PASSIVE CAB AND WEDGE OPERATING INSTRUCTIONS
1
1
2
2
3

7
Active:
Passive:
Active:
Passive:
Active:
Passive:
Active:
Passive: N/A
Active: N/A
Passive:
Active:
Passive: N/A
Active:
Passive:
Active: N/A
Passive:
Active:
Passive: 8 ohms
Active: Active crossover
Passive: Passive crossover
Active:
Passive:
SPECIFICATION
Active Wedge (ACLR-AW):...............................................
Active Cab (ACLR-AC):......................................................
Passive Wedge (ACLR-PW): ............................................
Passive Cab (ACLR-PC): ...................................................
Frequency
Response
SPL
SPL
Recommended
Directivity
Sensitivity
Impedance
Crossover
Drivers

8
RESPONSE DATA
On Axis Amplitude Response
Normalized Off Axis Responses
Freeeld response with test mic at 2 meters
Off axis responses taken at 10-degree intervals normalized to on-axis response
Questo manuale è adatto per i seguenti modelli
7
Indice
Altri manuali Atomic Altoparlanti


















