ATTO Technology Celerity FC-21PS Manuale utente

Installation and Operation Manual

Celerity FC host adapters

Celerity FC-41EN

4-Gb FC single channel host adapter

Celerity FC-42EN

4-Gb FC dual channel host adapter

Celerity FC-44ES

4-Gb FC quad channel host adapter

Celerity FC-42ES

4-Gb FC dual channel host adapter

Celerity FC-41ES

4-Gb FC single channel host adapter

Celerity FC-42XS

4-Gb FC dual channel host adapter

Celerity FC-41XS

4-Gb FC single channel host adapter

Celerity FC-21PS

2-Gb FC single channel host adapter

Celerity FC-24XL

2-Gb FC quad channel host adapter with IOPC architecture

holders. No part of this manual may be reproduced in any form or by any means without the express written

permission of ATTO Technology, Inc.

12/2006 Document Control Number: PRMA-0344-000

ATTO Technology Inc.Celerity FC Storage Adapters Installation and Operation Manual

Contents

1 ATTO provides Fibre Channel solutions ..........................................1

Celerity FC-41EN Adapter

Celerity FC-42EN Adapter

Celerity FC-44ES Adapter

Celerity FC-42ES Adapter

Celerity FC-41ES Adapter

Celerity FC-42XS Adapter

Celerity FC-41XS Adapter

Celerity FC-21PS Adapter

Celerity FC-24XL Adapter

Celerity Selection Guide

2 Fibre Channel is a key technology for storage ................................11

Glossary

3 Hardware installation ..........................................................................13

Bracket details

Adapter board details

4 Installing and updating drivers .........................................................23

Specialized configurations

Windows 2000/XP/Server 2003

Mac OS X driver installation, update

Linux driver installation, update

5 Updating hardware flash ....................................................................26

6 Troubleshooting ..................................................................................27

Mac OS X

Windows 2000/XP/Server 2003

Linux

Appendix A Standards and compliances ............................................i

FCC standards: radio and television interference

Canadian standards

European standards

Usage restrictions

The following applies to the Celerity FC-42XS host adapter only

Appendix B Accessories .......................................................................iii

Appendix C SCSI adapter selection guide ..........................................iv

Appendix D Contact ATTO Technology, Inc. ......................................v

1 ATTO Technology Inc. Celerity FC Host Adapters Installation and Operation Manual

1 ATTO provides Fibre Channel solutions

The ATTO Celerity Fibre Channel family of storage products provides connectivity, intelligence and

scalability. Celerity FC host adapters simplify advanced storage networking needs such as switching,

backup and data management. Specifically designed to enhance the functionality of third party fabric

hardware and software, Celerity FC products are the industry-leading platform for storage connectivity.

Celerity FC-41EN Adapter

The Celerity FC-41EN is a single-channel host

adapter. With 4-Gb FC speeds of up to 800 MB/sec.,

the FC-41EN supports the most demanding

application requirements.

The FC-41EN takes advantage of the latest in host

interconnect technology, PCI Express, a serial, high-

speed connection that supports aggregate throughout

up to 2 GB/sec.full-duplex. The FC-41EN is software

compatible with existing PCI and PCI-X products

using the same device drivers as other Celerity FC

family products, simplifying user installation and

support. It is backward compatible with existing 2-Gb

and 1-Gb FC infrastructures, protecting existing

technology investments.

Hardware specifications

• 1 Fibre Channel port

• 4-Gigabit data transfer rate

• 800 MB/sec. maximum full-duplex throughput

• Supports all FC topologies: direct fabric,

arbitrated loop and point-to-point

• ANSI Fibre Channel: FC-PH, FC-FCP, FC-AL,

FC-AL2, FC-PLDA, FC-FLA

• Flash ROM for easy field upgrades

• FC Class 3 support

• Local management and diagnostics

• Buffer credits: 4

Advanced FC capabilities

• Supports SNIA HBA API

• On-demand automatic negotiation between 4-

Gb, 2-Gb and 1-Gb Fibre Channel

• Supports initiator and target modes

• Supports Windows® FDMI and WMI

• Supports exclusive ATTO Advanced Data

Streaming (ADS™) technology

Host bus specifications

• x4 mechanical and x4 electrical PCI Express

interconnect

• Conforms to PCI Express Base Spec 1.0a

• Conforms to PCI Express CEM Spec 1.0a

Environmental & physical specifications

• Conforms to PCIe low profile form factor

specifications

• Operating temperature: 0 to 45º C (32-113º F)

• Storage temperature: -40 to 70ºC (-40 to 158º F)

• Relative humidity: 10 to 90% non-condensing

• 100 lf/m (minimum) airflow recommended

• Conforms to PCI Express low-profile form-factor

specification

• 12V @ 0.5A (max)

• Length: 5.600 inches

• Height: 2.712 inches

External connectivity

• Easy-to-install full and low-profile connection

plates

• External LEDs for on-line and speed status

• A pluggable optical LC SFP transceiver included

Software specifications

• Windows XP, 2000, and Server 2003

• Mac® OS X (10.4.x or later)

• Red Hat Linux (2.4 and 2.6 kernels)

• SUSE Linux (2.6 kernel)

Celerity FC-42EN Adapter

The Celerity FC-42EN is a dual-channel host adapter,

providing port density for Enterprise server and

workstation applications. With 4-Gb FC speeds of up

to 800 MB/sec.full-duplex per channel, the FC-42EN

supports the most demanding application

requirements.

The FC-42EN takes advantage of the latest in host

interconnect technology, PCI Express, a serial, high-

speed connection that supports aggregate throughout

up to 2 GB/sec. The FC-42EN is software compatible

with existing PCI and PCI-X products using the same

device drivers as other Celerity FC family products,

simplifying user installation and support. It is

backward compatible with existing 2-Gb and 1-Gb FC

infrastructures, protecting existing technology

investments.

Hardware specifications

• 2 independent Fibre Channel ports

• 4-Gigabit data transfer rates per channel

• 800 MB/sec. maximum full-duplex throughput

per channel

• Supports all FC topologies: direct fabric,

arbitrated loop and point-to-point

• ANSI Fibre Channel: FC-PH, FC-FCP, FC-AL,

FC-AL2, FC-PLDA, FC-FLA

• Flash ROM for easy field upgrades

• FC Class 3 support

• Local management and diagnostics

• Buffer credits: 4

Advanced FC capabilities

• Supports SNIA HBA API

• On-demand automatic negotiation between 4-

Gb, 2-Gb and 1-Gb Fibre Channel

• Supports initiator and target modes

• Supports Windows FDMI and WMI

• Supports exclusive ATTO Advanced Data

Streaming (ADS) technology

Host bus specifications

• x4 mechanical and x4 electrical PCI Express

interconnect

• Conforms to PCI Express Base Spec 1.0a

• Conforms to PCI Express CEM Spec 1.0a

Environmental & physical specifications

• Operating temperature: 0-45º C (32-113º F)

• Storage temperature: -40 to 70ºC ( -40 to 158º F)

• Relative humidity: 10 to 90% non-condensing

• 100 lf/m (minimum) airflow recommended

• Conforms to PCI Express low-profile form-factor

specification

• 12V @ 0.5A (max)

• Length: 5.600 inches

• Height: 2.712 inches

External connectivity

• Easy-to-install full and low-profile connection

plates

• External LEDs for on-line and speed status for

each channel

• 2 pluggable optical LC SFP transceivers

included

Software specifications

• Windows XP, 2000, and Server 2003

• Mac OS X (10.4.x or later)

• Red Hat Linux (2.4 and 2.6 kernels)

• SUSE Linux (2.6 kernel)

3 ATTO Technology Inc. Celerity FC Host Adapters Installation and Operation Manual

Celerity FC-44ES Adapter

The Celerity FC-44ES uses PCI Express Interconnect

and 4-Gigabit Fibre Channel to provide 4-Gb FC

speeds of up to 800 MB/sec. per channel. The FC-

44ES supports high-definition video, rich content

databases and other high bandwidth environments.

The FC-44ES uses PCI Express, a serial, high-speed

connection that supports aggregate throughput up to 4

GB/sec. (x8 PCIe) full-duplex. With software

compatible with existing PCI and PCI-X products, the

FC-44ES uses the same device drivers as other

Celerity FC family products, simplifying installation

and support.

Hardware specifications

• 4 independent Fibre Channel ports

• 4-Gigabit data transfer rates per channel

• 800 MB/sec. maximum full-duplex throughput

per channel

• Supports all FC topologies: direct fabric,

arbitrated loop and point-to-point

• ANSI Fibre Channel: FC-PH, FC-AL, FC-FCP,

FC-AL2, FC-PLDA, FC-FLA

• Flash ROM for easy field upgrades

• FC Class 3 support

• Local management and diagnostics

• Buffer credits: 8 @ 512 Bytes; 8 @ 2 Kilobytes

Advanced FC capabilities

• Supports SNIA HBA API

• On-demand automatic negotiation among 4-Gb,

2-Gb and 1-Gb Fibre Channel

• Supports target and initiator modes

• Supports Windows FDMI and WMI

• Supports exclusive ATTO Advanced Data

Streaming (ADS) Technology

Host bus specifications

• x8 mechanical and x8 electrical PCI Express

Interconnect

• Conforms to PCI Express Base Spec 1.0a

• Conforms to PCI Express CEM Spec 1.0a

• PCI Express to PCI/PCI-X Bridge spec 1.0

Environmental & physical specifications

• Conforms to PCI standard height, half length

form-factor specifications

• Length: 6.525 inches

• Height: 3.81 inches

• Operating temperature: 0-45ºC (32-113ºF)

• Storage temperature: -40 to 70ºC (-40 to 158ºF)

• Relative humidity: 5 to 95% non-condensing

• 12V@ 2.1A (max.)

• 3.3V @ 3.0A (max.)

• 100 lf/m (minimum) airflow recommended

External connectivity

• Easy-to-install full height connection plate

• External LEDs for on-line and speed status for

each channel

• 4 pluggable optical LC SFP transceivers

included

Software specifications

• Windows XP, 2000 and Server 2003

• Mac OS X (10.4.x or later)

• Red Hat Linux (2.4 and 2.6 kernel)

• SUSE Linux (2.6 kernel)

Celerity FC-42ES Adapter

The Celerity FC-42ES is a dual-channel host adapter

providing port density for Enterprise server and

workstation applications. With 4-Gb FC speeds of up

to 800 MB/sec. per channel, the FC-42ES supports the

most demanding application requirements.

Additionally the FC-42ES takes advantage of the latest

in host interconnect technology, PCI Express, a serial,

high-speed connection that supports aggregate

throughput up to 4 GB/sec. (x8 PCIe) full-duplex. The

FC-42ES is software compatible with existing PCI and

PCI-X products using the same device drivers as other

Celerity FC family products, simplifying user

installation and support. It is backward compatible

with existing 2-Gb and 1-Gb Fibre Channel

infrastructure, protecting existing technology.

Hardware specifications

• 2 independent Fibre Channel ports

• 4-Gigabit data transfer rates per channel

• 800 MB/sec. maximum full-duplex throughput

per channel

• Supports all FC topologies: direct fabric,

arbitrated loop and point-to-point

• ANSI Fibre Channel: FC-PH, FC-AL, FC-AL2,

FC-FCP, FC-PLDA, FC-FLA

• Flash ROM for easy field upgrades

• FC Class 3 support

• Local management and diagnostics

• Buffer credits: 8 @ 512 Bytes; 8 @ 2 Kilobytes

Advanced FC capabilities

• Supports SNIA HBA API

• On-demand automatic negotiation among 4-Gb,

2-Gb and 1-Gb Fibre Channel

• Supports target and initiator modes

• Supports Windows FDMI and WMI

• Supports exclusive ATTO Advanced Data

Streaming (ADS) Technology

Host bus specifications

• x8 mechanical and x8 electrical PCI Express

Interconnect (non RoHS compliant); x4

mechanical and x4 electrical PCI Express

interconnect (RoHS compliant)

• Conforms to PCI Express Base Spec 1.0a

• Conforms to PCI Express CEM Spec 1.0a

• PCI Express to PCI/PCI-X Bridge spec 1.0

Environmental & physical specifications

• Operating temperature: 0-45ºC (32º-113ºF)

• Storage temperature: -40º to 70ºC (-40º to

158ºF)

• Relative humidity: 5 to 95% non-condensing

• 100 lf/m (minimum) airflow recommended

• Non RoHS

• 12V@ .035A (max.); 3.3V @ 1.42A (max.)

• Conforms to PCI standard height, half length

form-factor specifications

• Length: 6.525 inches

• Height: 3.81 inches

• RoHS

• Conforms to PCI half height, half length

form-factor specifications

• 12V@ 04A (max.); 3.3V @ 1.5A (max.)

• Length: 5.6 inches

• Height: 2.712 inches

External connectivity

• Easy-to-install full height connection plate

• External LEDs for on-line and speed status for

each channel

• 2 pluggable optical LC SFP transceivers

included

Software specifications

• Windows XP, 2000 and Server 2003

• Mac OS X (10.4.x or later)

• Red Hat Linux (2.4 and 2.6 kernel)

• SUSE Linux (2.6 kernel)

5 ATTO Technology Inc. Celerity FC Host Adapters Installation and Operation Manual

Celerity FC-41ES Adapter

The Celerity FC-41ES is a single-channel host adapter

providing support for the most demanding application

requirements. With 4-Gb FC speeds of up to 800

MB/sec. per channel, the FC-41ES is a cost effective

connectivity solution for environments requiring

maximum throughput.

The FC-41ES also takes advantage of the latest in host

interconnect technology: PCI Express, a serial, high-

speed connection that supports aggregate throughput

up to 2 GB/sec. (x4 PCIe) full-duplex. The FC-41ES is

software compatible with existing PCI and PCI-X

products using the same device drivers as other

Celerity FC products, simplifying user installation and

support. It is backward compatible with existing 2-Gb

and 1-Gb Fibre Channel infrastructure, protecting

existing technology investments.

Hardware specifications

• 1 Fibre Channel port

• 4-Gigabit FC data transfer rates

• 800 MB/sec. maximum full-duplex throughput

• Supports all FC topologies: direct fabric,

arbitrated loop and point-to-point

• ANSI Fibre Channel: FC-PH, FC-AL, FC-FCP,

FC-AL2, FC-PLDA, FC-FLA

• Flash ROM for easy field upgrades

• FC Class 3 support

• Local management and diagnostics

• Buffer credits: 8 @ 512 Bytes; 8 @ 2 Kilobytes

Advanced FC capabilities

• Supports SNIA HBA API

• On-demand automatic negotiation among 4-Gb,

2-Gb and 1-Gb Fibre Channel

• Supports target and initiator modes

• Supports Windows FDMI and WMI

• Features exclusive Advanced Data Streaming

(ADS) Technology

Host bus specifications

• x4 mechanical and x4 electrical PCI Express

interconnect

• Supports PCI Express Base Spec 1.0a and

CEM Spec 1.0a

• Supports PCI Express to PCI/PCI-X bridge spec

1.0

Environmental & physical specifications

• Conforms to PCIe low profile form factor

specifications

• Length: 5.600 inches

• Height: 2.712 inches

• Operating temperature: 0-45ºC (32º-113ºF)

• Storage temperature: -40º to 70ºC (-40º to

158ºF)

• Relative humidity: 5 to 95% non-condensing

• 100 lf/m (minimum) airflow recommended

• Power: 12V@ 0.4A max; [email protected] max.

External connectivity

• Easy-to-install full height connection bracket

• External LEDs for on-line and speed status

• Pluggable optical LC SFP transceiver included

Software specifications

• Windows XP, 2000, Server 2003

• Red Hat Linux (2.4 and 2.6 kernel)

• SUSE Linux (2.6 kernel)

• Mac OS X (10.4.x or later)

Altri manuali per Celerity FC-21PS

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali ATTO Technology Adattatore host

ATTO Technology

ATTO Technology Celerity FC-41EL Manuale utente

ATTO Technology

ATTO Technology Celerity FC-82EN Manuale utente

ATTO Technology

ATTO Technology Celerity FC-41ES Manuale

ATTO Technology

ATTO Technology ExpressSAS R608 RAID Manuale utente

ATTO Technology

ATTO Technology Celerity FC-84EN Manuale utente

ATTO Technology

ATTO Technology ATTO ExpressPCI FC 3321 Manuale utente

ATTO Technology

ATTO Technology ATTO Celerity FC-81EN Manuale utente

ATTO Technology

ATTO Technology ATTO ExpressPCI FC 2600 Manuale

ATTO Technology

ATTO Technology 6-Gb SAS/SATA Host Adapter H60F Manuale utente

ATTO Technology

ATTO Technology R30F Manuale utente

ATTO Technology

ATTO Technology UL4D PCI Manuale utente

ATTO Technology

ATTO Technology Celerity FC-41EL Manuale utente

ATTO Technology

ATTO Technology ExpressSAS H1208 HBA Manuale utente

ATTO Technology

ATTO Technology ExpressSAS H608 Manuale utente

ATTO Technology

ATTO Technology Low-Profile SAS Host Adapter H308 Manuale utente

ATTO Technology

ATTO Technology ATTO Celerity FC-81EN Manuale utente

ATTO Technology

ATTO Technology ExpressPCI UL4S Manuale utente

ATTO Technology

ATTO Technology Low-Profile SAS Host Adapter H308 Manuale utente

ATTO Technology

ATTO Technology ATTO ExpressPCI FC 3300 Manuale

ATTO Technology

ATTO Technology ATTO Celerity FC-42XS Manuale utente

ATTO Technology

ATTO Technology ATTO ExpressPCI Ultra/WIDE SCSI Host Adapters Express PCI PSC: Single-Channel Single-Ended Ultra/WIDE ExpressPCI DC:... Manuale utente

ATTO Technology

ATTO Technology ATTO Celerity FC-42ES Manuale utente

ATTO Technology

ATTO Technology Low-Profile SAS Host Adapter H308 Manuale utente

ATTO Technology

ATTO Technology Low Profile SAS Host Adapter H380 Manuale utente

Manuali Adattatore host popolari di altre marche

Digital Equipment

Digital Equipment StorageWorks EK-KZPCM-UG Manuale utente

Sun Microsystems

Sun Microsystems Sun StorEdge Manuale utente

LSI

LSI LSI21320-R Manuale utente

LSI

LSI Ultra160 Manuale utente

Tekram Technology

Tekram Technology TR-824 Manuale utente

LSI

LSI S14037 Manuale utente

Sonnet

Sonnet Tempo Ultra ATA66 Manuale utente

Adaptec

Adaptec AHA-3940UW/OF Manuale utente

HighPoint

HighPoint RocketRAID 600L Manuale utente

Tekram Technology

Tekram Technology DC-820B Manuale utente

HighPoint

HighPoint RocketRAID 174x Manuale utente

Adaptec

Adaptec AHA-2944UW Manuale utente

IBM

IBM System Storage DS4000 Manuale utente

HP A8002A Istruzioni utente

Yealink

Yealink VC400 Manuale utente

Sans Digital

Sans Digital HA-SAN-4ESPCIE Manuale utente

Adaptec

Adaptec AHA-2740 Manuale utente

Adaptec

Adaptec AHA-1540CP Manuale utente