NO.5
NO.7
In use please pay attention to the following items:
NO.6
NO.4
*if the remote control cannot function, it is because the battery of
remote control has been used up. thank you.
1. ANTENNA
2. AUX INPUT: Connect to sound sources such as computer, MP3,etc.
3. AC IN: AC Power cord
System connection diagram
* Do not leave objects generating magnetism near the speakers.
Connect the 3.5 stereo cable to the input of the subwoofer,Connect the
3.5 stereo input jack into output of the audio sources,such as MP3,MP4,
walkman,computer etc.
1. Connect the audio sources
2. Power on the system, adjust the master volume to the suitable level.
Adjust volume to the suitable to meet your different requirement.
Rear panel
(1)
(2)
(3)
NO.4
6. When entering into BT mode, “ NEXT ” means next song; “ PREV ”means
previous song; “PLAY/PAUSE”means play/pause; In FM mode, you can pressing
the number “0-9”on the remote control, select the radio station you prefer or pick
the saved station by number directly.
7. VOL+/- means you can increase or decrease volume.
8.“TUNING-”means decrease the frequency of channel selection. Press
“TUNING-” for a long time means decrease the frequency of channel selection
continuously
9.“TUNING+”means increase the frequency of channel selection. Press
“TUNING+”for a long time means increase the frequency of channel selection
continuously.
10.“PLAY/PAUSE”means play/pause for BT.
11.“PREV” means previous song for BT.
12.“NEXT” means next song for BT.
13. Press “SOURCE” buttons on the remote to convert to Bluetooth input
mode, LED display right bottom start to flashing (2 seconds) to search the
Bluetooth device. Turn on your mobile Bluetooth device and search the device
name “ Audio Republic X1 ”, paired them well . When you have successfully
paired your mobile to the speaker system, the LED right bottom stop flashing.
When start to play your mobile music, the LED flashed every one second . The
functions as "PREVIOUS/NEXT", "PLAY/PAUSE", can operate via the front
panel. On BL mode, when connecting with mobile, press “ ” for 3 seconds,
bluetooth function can be force-disconnected .
14. Press“LED”each time to change LED effect(LED1-LED6-LEDF).
